硅藻土地区桥梁灌注桩成孔测试研究∗

硅藻土作为一种特殊的黏性土,在分布上具有一定的区域性,目前针对该类型土的工程特性以及硅藻土地区灌注桩成孔方法的研究都较少。以杭绍台高铁项目为工程依托,为了研究硅藻土层中灌注桩的成孔方法,开展了灌注桩成孔方法现场试验;分别采用冲击锤锤击成孔、旋挖干钻成孔和旋挖泥浆护壁成孔三种方法进行施工,对三种方法的成孔质量进行分析对比。研究结果表明:在硅藻土地区施工灌注桩,旋挖干钻成孔工艺施工速度较快,效率高,桩长、桩径、桩位偏差和垂直度均能满足设计要求,成孔后孔壁稳定性好,成孔质量更为可靠;冲击锤法成孔,成孔速度较慢,且存在桩孔扩径现象;旋挖泥浆护壁法成孔后平稳性较差,波动性较大,且存在局部塌孔现象,成孔效果较差。因此建议硅藻土地段优先考虑采用旋挖干钻法施工桥梁灌注桩。     

以梭鱼金属硫蛋白基因表达监测海洋重金属污染

分离了梭鱼金属硫蛋白132个碱基对应44个氨基酸的部分基因序列,以此为基础建立了分析梭鱼金属硫蛋白基因表达的实时定量PCR方法,并用于分析渤海南戴河和大神堂近岸海域野生梭鱼金属硫蛋白基因的表达.结果表明,南戴河野生梭鱼金属硫蛋白基因的表达水平(雄鱼:0.012 ± 0.0064 copies/copy β-actin;雌鱼:0.0099 ± 0.0042 copies/copy β-actin)明显高于大神堂野生梭鱼的表达水平(雄鱼:0.0017± 0.0011 copies/copy β-actin;雌鱼:0.0014 ± 0.00095 copies/copy β-actin).该结果与两地野生梭鱼体内重金属残留水平相一致,提示梭鱼金属硫蛋白基因可作为监测海洋重金属污染的敏感标志物之一.     

气体分离循环对高温厌氧消化过程的影响

采用厌氧序批式反应器,研究了气体循环(包括气体直接循环和脱除气体中的氢气后循环)对以葡萄糖和乙酸钠配制的模拟废水在高温厌氧消化过程中乙酸代谢速率、出水性质及微生物相的影响,并采用尺寸排除色谱和三维荧光光谱技术,对溶解性微生物产物(SMP)的分子量分布和荧光物质组成进行了分析.结果显示,气体循环使得出水中残余挥发性脂肪酸的浓度由238.2mg/L(未脱氢)和129.6mg/L(脱氢)分别减少至8.5mg/L和8.2mg/L,并最终降低了SMP产量,45d时分别降至气体循环前的36.8%和59.2%.脱氢气体循环促进了乙酸化和乙酸氧化,导致了微生态环境和甲烷化基质浓度的差异,促进了高分子量SMP向低分子量SMP的转化,污泥中的微生物形态亦发生了较大变化.可见气体循环改善了基质与微生物的混合状况,改善了出水水质,而脱氢气体循环加速了乙酸的代谢,有望更快速地解除易降解有机物高温厌氧消化过程中的酸抑制,提高厌氧消化效率.     

Single particle analysis of ambient aerosols in Shanghai during the World Exposition, 2010: two case studies

ATSI Model 3800 aerosol time-of-flight mass spectrometer (ATOFMS) was deployed for single-particle analysis in Shanghai during the World Exposition (EXPO), 2010. Measurements on two extreme cases: polluted day (1st May) and clean day (25th September) were compared to show how meteorological conditions affected the concentration and composition of ambient aerosols. Mass spectra of 90496 and 50407 particles were analyzed respectively during the two sampling periods. The ART-2a neural network algorithm was applied to sort the collected particles. Seven major classes of particles were obtained: dust, sea salt, industrial, biomass burning, organic carbon (OC), elementary carbon (EC), and NH₄-rich particles. Number concentration of ambient aerosols showed a strong anti-correlation with the boundary layer height variation. The external mixing states of aerosols were quite different during two sampling periods because of different air parcel trajectories. Number fraction of biomass burning particles (43.3%) during polluted episode was much higher than that (21.6%) of clean time. Air parcels from the East China Sea on clean day diluted local pollutant concentration and increased the portion of sea salt particle dramatically (13.3%). The large contribution of biomass burning particles in both cases might be an indication of a constant regional background of biomass burning emission. Mass spectrum analysis showed that chemical compositions and internal mixing states of almost all the particle types were more complicate during polluted episode compared with those observed in clean time. Strong nitrate signals in the mass spectra suggested that most of the particles collected on polluted day had gone through some aging processes before reaching the sampling site.     

基于径向基函数神经网络方法的城市生态压力预测

针对城市生态压力影响因素复杂,难以对城市未来可持续发展状况做出准确判断的问题,提出了城市生态压力的径向基函数神经网络预测模型,分析了影响城市生态系统的主要因素.以抚顺市1995-2009年数据为基础,验证了模型的准确性并预测了该市2010-2015年城市生态系统的压力情况.研究结果表明:能源消耗指标是影响城市生态系统压力的主要因素;运用径向基函数神经网络模型对训练样本的拟合精度以及对测试样本的仿真精度分别达97.91%和94.16%;抚顺市2015年的人均生态足迹、 生态承载力和生态赤字分别达到7.013、 0.523和6.49 hm²/人.     

复杂地貌区域生态敏感区综合评价与保护对策——以广西钦州市为例

复杂地貌区域国土开发受生态环境因素影响较单一地貌地区更复杂,其境内生态敏感区类型较多,且空间分布比较杂乱,不同生态敏感区之间又相互影响。文章选择山、水、林、田、城互为镶嵌的广西钦州市作为案例城市,以小流域为评价单元,建立集"地"、"水"、"绿"三位于一体的评价体系,在遥感和GIS技术的支持下,将单因子定性分级和多因子空间叠加模型相结合,对整个区域的生态敏感区进行综合评价及分区。从研究结果来看,这种评价技术能够较好地反映这些生态敏感区的综合分异规律,有助于当地政府在区域开发中制定更为科学的生态安全防范对策。     

低DO微孔曝气变速氧化沟脱氮能力恢复效果分析

活性污泥法低温运行中的污泥膨胀主要是由丝状菌引起,微丝菌(M.Parvicella)则是污泥膨胀中的优势丝状菌.针对微孔曝气变速氧化沟中试系统中因低温引起的污泥严重膨胀及其污泥硝化能力降低的问题,采取增大曝气量快速培养污泥硝化菌含量,再逐渐增加A:O比为0,0.1,0.5,1.1,1.8提高反硝化能力,从而恢复污泥脱氮能力.在恢复期间,污泥絮体中的疏水性M.Parvicella附着于反硝化产生气体上,在选择池和氧化沟表面形成浮泥,对其进行去除,以减少絮体中丝状菌含量,提高硝化菌含量及其硝化能力.同时对不同微丝菌含量的污泥絮体(沟内混合液和表面浮泥)的硝化和反硝化速率进行测定,结果表明微丝菌含量高的活性污泥其硝化能力较弱,而快速反硝化能力较强,则对慢速和内源反硝化影响不大.进一步证明M.Parvicella也是除了DO浓度,水温和负荷之外影响活性污泥硝化能力和污泥沉降性能的重要因素之一.     

介质阻挡放电反应器中的二硫化碳降解特性

为了解CS₂(二硫化碳)在介质阻挡放电反应器中的降解特性,提高其去除率,设计并制作了同轴圆柱介质阻挡放电反应器,研究了介质层数、外施电压、中心电极材料及直径、背景气氛种类和RH(相对湿度)对CS₂去除率的影响. 结果表明:在外施电压(4.0～6.5kV)较低时,单介质反应器的CS₂去除率高于双介质反应器;而在外施电压(6.5～9.0kV)较高时,双介质反应器对CS₂的去除效果更好,增大外施电压有利于CS₂的降解. 铜丝比不锈钢丝更适合用作反应器的中心电极,此外,增加中心电极的直径也可提高CS₂去除率. 当中心电极直径从 3.2mm增至4.8mm时,CS₂平均去除率由63%增至75%,但平均质量能耗由510kJ/mg增至611kJ/mg. 同等条件下,CS₂在氧气中的平均去除率(74%)最大,空气(59%)中次之,氮气(48%)中最小;背景气氛中适量的RH(26%)有助于提高CS₂去除率,但RH太大(大于50%)反而会降低CS₂去除率.      

洞庭湖湿地Cd富集植物蒌蒿(Artemisia selengensis)的耐性生理机制研究

采用盆栽植株和外源Cd胁迫的方法,分别对不同生长期蒌蒿植株根、叶组织中的抗氧化酶活性、可溶性蛋白及MDA含量进行测定,以揭示蒌蒿在Cd胁迫下的抗氧化机理和耐受机制。研究结果表明,Cd胁迫对上述生理指标均有显著影响:≤20mg·kg-1的Cd处理可使幼苗期植株器官中的可溶性蛋白含量增加16.5%～19.1%,100mg·kg-1的Cd含量水平则导致其含量减少近30%,可溶性蛋白含量的变化与植株的生物量积累关系密切;3种酶活性在0～10mg·kg-1的Cd处理下未显示出明显变化,幼苗期植株CAT、POD活性在10～80mg·kg-1的Cd胁迫下增加明显,高于此浓度范围则使酶蛋白受到破坏而失活,中等含量水平(≤40mg·kg-1)的Cd处理经过长时间作用可使植株逐渐适应胁迫环境,胁迫强度较大的Cd处理可显著提高SOD酶的活性;Cd胁迫过程中植株MDA积累量不断增加。3种抗氧化酶活性的增强在蒌蒿植株耐受Cd胁迫方面能起到较好的防御作用。     

Regression-type estimators for adaptive two-stage sequential sampling

Adaptive two-stage sequential sampling (ATSSS) design was developed to observe more rare units and gain higher efficiency, in the sense of having a smaller variance estimator, than conventional sampling designs with equal effort for rare and spatially cluster populations. For certain rare populations, incorporating auxiliary variables into a sampling design can further improve the observation of rare units and increase efficiency. In this article, we develop regression-type estimators for ATSSS so that auxiliary variables can be incorporated into the ATSSS design when warranted. Simulation studies on two populations show that the regression-type estimators can significantly increase the efficiency of ATSSS and the detection of more rare units as compared to conventional sampling counterparts. Simulation of sampling of desert shrubs in Inner Mongolia (one of the two populations studied) showed that by incorporating a GIS auxiliary variable into ATSSS with the regression estimators resulted in a gain in efficiency over ATSSS without the auxiliary variable. Further, we found that the use of the GIS auxiliary variable in a conventional two-stage design with a regression estimator did not show a gain in efficiency.