Epidemiological and biomechanical evaluation of airline baggage handling

Objectives. Musculoskeletal disorders (MSDs) are prevalent among airline baggage handlers due to manual materials handling. In this study, the Nordic musculoskeletal questionnaire (NMQ), the revised National Institute for Occupational Safety and Health (NIOSH) lifting equation, and the University of Michigan 3D Static Strength Prediction Program? (3DSSPP) were used to analyze MSDs among baggage handlers. Methods. The NMQ was filled out by 209 baggage handlers and 46 arbitrarily selected baggage handlers were evaluated using the NIOSH method and 3DSSPP. Results. The obtained results showed that the most common MSDs occurred in the lower back region. The next risky regions included knees, neck, and upper back, respectively. The NIOSH results confirmed that the subjects lifted loads heavier than the permitted limit and their lifting postures were inappropriate. The results of the 3DSSPP also indicated that compression forces exceeded the NIOSH limit in these awkward postures. Conclusions. Relying on this study, holding compulsory ergonomic lifting training courses could be proposed for workers and regulations adjusting an upper limit for maximum baggage weight must be also enacted in order to improve occupational health and prevent the prevalence of increasing MSDs.     

Metabolic and endocrine effects of bisphenol A exposure in market seller women with polycystic ovary syndrome

Bisphenol A (BPA) is one of the synthetic monomer which can be found in the environment. Limited animal and human studies have demonstrated that BPA alters endocrine and or metabolic functions. The aims of the present study were to evaluate serum BPA level in marketing seller women with polycystic ovary syndrome (PCOS) and hormonal and metabolic effects of this exposure compared to a control paired group. In a case-control study, 62 PCOS women who work as marketing sellers and 62 healthy women with similar jobs were included. The two groups were body mass index (BMI)- and age-matched. Serum samples were analyzed for BPA content, fasting blood sugar (FBS), triglyceride, cholesterol, HDL and LDL levels, thyroid stimulating hormone (TSH) concentration, and LH:FSH ratio. Significant higher serum BPA content (0.48 ± 0.08 vs. 0.16 ± 0.04 ng/ml), triglyceride (103.05 ± 13.10 vs. 91.65 ± 12.52 mg/dl), cholesterol (165.05 ± 10.79 vs. 161.21 ± 10.31 mg/dl) levels and LH:FSH ratio (3.64 ± 0.86 vs. 0.62 ± 0.14) and significant lower TSH concentration (1.56 ± 0.68 vs. 2.15 ± 1.09 IU/ml) were detected in case against control group, respectively (P < 0.05). No significant differences were detected in FBS, LDL, and HDL levels between the two groups. Also, there were no significant associations between serum TSH concentration and BPA level neither in case (P = 0.269) nor in control (P = 0.532) groups. In BPA-exposed PCOS women, BPA level was higher than healthy women and this difference maybe the cause of significant differences in levels of triglyceride, cholesterol, TSH, and LH:FSH ratio. These observations confirm the potential role of BPA in PCOS pathophysiology.     

Genotoxic effect of ciprofloxacin during photolytic decomposition monitored by the in vitro micronucleus test (MNvit) in HepG2 cells

Purpose

Ciprofloxacin (CIP), a broad-spectrum, second-generation fluoroquinolone, has frequently been found in hospital wastewaters and effluents of sewage treatment plants. CIP is scarcely biodegradable, has toxic effects on microorganisms and is photosensitive. The aim of this study was to assess the genotoxic potential of CIP in human HepG2 liver cells during photolysis.

Methods

Photolysis of CIP was performed in aqueous solution by irradiation with an Hg lamp, and transformation products were monitored by HPLC-MS/MS and by the determination of dissolved organic carbon (DOC). The cytotoxicity and genotoxicity of CIP and of the irradiated samples were determined after 24?h of exposure using the WST-1 assay and the in vitro micronucleus (MN) test in HepG2 cells.

Results

The concentration of CIP decreased during photolysis, whereas the content of DOC remained unchanged. CIP and its transformation products were not cytotoxic towards HepG2 cells. A concentration-dependent increase of MN frequencies was observed for the parent compound CIP (lowest observed effect level, 1.2???mol?L^?1). Furthermore, CIP and the irradiated samples were found to be genotoxic with a significant increase relative to the parent compound after 32?min (P?P?Conclusions Photolytic decomposition of aqueous CIP leads to genotoxic transformation products. This proves that irradiated samples of CIP are able to exert heritable genotoxic effects on human liver cells in vitro. Therefore, photolysis as a technique for wastewater treatment needs to be evaluated in detail in further studies, not only for CIP but in general.     

Alteration of in vitro and acute in vivo toxicity of textile dyeing wastewater after chemical and biological remediation

Introduction

Textile industry is one of the most common and essential sectors in Tunisia. However, the treatment of textile effluents becomes a university because of their toxic impacts on waters, soils, flora, and fauna.

Materials and methods

The aim of this work was to evaluate the ability of Pseudomonas putida mt-2 to decolorize a textile wastewater and to compare the biologic decolorization process to the chemical one currently used by the textile industry.

Results

P. putida exhibited a high decolorizing capacity of the studied effluent, compared to the coagulation?Cflocculation method with decolorization percentage of 86% and 34.5%, respectively. Genotoxicity of the studied effluent, before and after decolorization by P. putida mt-2, was evaluated in vitro, using the SOS chromotest, and in vivo, in mouse bone marrow, by assessing the percentage of cells bearing different chromosome aberrations compared to not treated mice. In addition, textile effluent statistically significant influenced acetylcholinesterase and butyrylcholinesterase activities and lipid peroxidation (p?P. putida is a promising and improved alternative to treating industrial scale effluent compared to current chemical decolorization procedures used by the Tunisian textile industry.     

INSTITUTIONAL FRAMEWORK FOR REGIONAL COOPERATION IN THE DEVELOPMENT OF WATER SUPPLY AND DEMAND IN THE MIDDLE EAST1

ABSTRACT: Water is, and most likely will continue to be, one of the main concerns and potential causes of instability in the Middle East (ME). The contribution of the existing renewable water resources is limited and can not fulfill the long-term projected gap between water supply and demand for most of the countries in the ME. An integrated regional approach for fulfilling this gap was preferred. A regional institutional framework was proposed for the implementation of this integrated regional approach and consists of a regional water board operating through three units for technical, implementation, and management aspects of project and activities. An analysis of the regional water supply and demand development, the design and policy making of the proposed institution, technology and water markets, cooperation, actors and beneficiaries, finances, and expected obstacles and constraints to the establishment and sustainable operation of the proposed institution are included.     

Adsorption of benzene and toluene from waste gas using activated carbon activated by ZnCl2

A series of activated carbons with high surface area were prepared from walnut shell using chemical activation with ZnCl2. In this research the carbonization stage was carried out at 500℃. The performance of the synthesized carbons evaluated in adsorption of benzene and toluene from waste gas. The influence of impregnation ratio on the characteristics of synthesized activated carbons as well as their adsorption capacity was investigated. The ratio of activation agent to walnut shell was selected in the range of 0.5-2.0 wt/wt. The synthesized activated carbons were characterized using XRD, SEM, BET and FTIR techniques. The highest activated carbon production yield was obtained at impregnation ratio of 1.5 wt/wt. The XRD analysis illustrated that peaks intensity decreased with increasing impregnation ratio showing that amorphous property of samples was increased. The SEM analysis revealed successful pore development in synthesized activated carbons obtained at high impregnation ratios. The surface area of the activated carbons increased with increasing impregnation ratio and its maximum value reached 2643 m2.g 1 at impregnation ratio of 2/1. FTIR analysis indicated that the relative amount of different acidic surface groups on synthesized carbons was a function of impregnation ratio. Experimental results for benzene and toluene adsorption showed a high potential of employing synthesized impregnated activated carbon for treatment of waste gas. Generally, the amount of VOC adsorbed on the surface was affected by physicochemical properties of synthesized activated carbons.     

Polylactide (PLA)—Halloysite Nanocomposites: Production, Morphology and Key-Properties

To evaluate the potential of halloysite nanotubes (HNT) as nanofiller for polylactide (PLA), various nanocomposites have been successfully produced by melt-blending the polyester matrix with HNT (HNT(QM)). HNT were also surface treated by silanization reaction with 3-(Trimethoxysilyl) propyl methacrylate (TMSPM). The morphology, thermal, tensile and impact strength properties of the nanocomposites containing 3?C12?% HNT were evaluated and compared to those of pristine (unfilled) PLA. The nanocomposites were characterized by higher rigidity (with Young??s modulus increasing with HNT loading), higher tensile strength (about 70?MPa at 6?% HNT(QM)), whereas the elongation at break and impact strength did not decrease. As demonstrated under dynamic solicitation (DMA), melt-blending PLA with HNT led to enhancement of storage modulus (E??) and offers the possibility to use PLA in applications requiring higher temperatures of utilization. However, with few exceptions, TGA and DSC measurements did not reveal important changes of thermal parameters. The surface silanization treatment proved to improve the quality of the nanofiller dispersion even at higher loading. As a result, good thermal stability associated to high tensile strength, and noticeable increases in impact properties were recorded. Furthermore, enhanced nucleating ability and crystallization kinetics of the PLA matrix were revealed as specific characteristics.     

Comprehensive primary particulate organic characterization of vehicular exhaust emissions in France

A study to characterize primary particulate matter (PM_2.5 and PM₁₀) from the French vehicular fleet was conducted during winter 2008, in a tunnel in Marseille, France. The carbonaceous fraction represents 70% of the aerosol mass and elemental carbon fraction (EC) represent 60% of the carbonaceous fraction. The organic carbon OC was characterized in term of its water soluble fraction, functionalization rate and HULIS content. Seventy trace organic compounds including alkanes, polycyclic aromatic hydrocarbons (PAH), petroleum biomarkers and carboxylic acids were also quantified, in order to determine an organic emission profile for chemical mass balance modeling studies. Such source profiles were still missing in Europe and particularly in France. The profile obtained in this study is consistent with profiles determined in tunnel or dynamometer studies performed in other countries during the last ten years. These results suggest that organic compounds profiles from vehicular exhaust emissions are not significantly influenced by the geographic area and are thus suitable for use in aerosol source apportionment modeling applied across extensive regions. The chemical profile determined here is very similar to those obtained for diesel emissions with high concentrations of EC relative to OC (EC/OC = 1.8) and low concentrations of the higher molecular weight PAH. These results are consistent with the high proportion of diesel vehicles in the French fleet (49%).     

Improving supplementary feeding in species conservation

Supplementary feeding is often a knee‐jerk reaction to population declines, and its application is not critically evaluated, leading to polarized views among managers on its usefulness. Here, we advocate a more strategic approach to supplementary feeding so that the choice to use it is clearly justified over, or in combination with, other management actions and the predicted consequences are then critically assessed following implementation. We propose combining methods from a set of specialist disciplines that will allow critical evaluation of the need, benefit, and risks of food supplementation. Through the use of nutritional ecology, population ecology, and structured decision making, conservation managers can make better choices about what and how to feed by estimating consequences on population recovery across a range of possible actions. This structured approach also informs targeted monitoring and more clearly allows supplementary feeding to be integrated in recovery plans and reduces the risk of inefficient decisions. In New Zealand, managers of the endangered Hihi (Notiomystis cincta) often rely on supplementary feeding to support reintroduced populations. On Kapiti island the reintroduced Hihi population has responded well to food supplementation, but the logistics of providing an increasing demand recently outstretched management capacity. To decide whether and how the feeding regime should be revised, managers used a structured decision making approach informed by population responses to alternative feeding regimes. The decision was made to reduce the spatial distribution of feeders and invest saved time in increasing volume of food delivered into a smaller core area. The approach used allowed a transparent and defendable management decision in regard to supplementary feeding, reflecting the multiple objectives of managers and their priorities.     

Relative lipid content as the sole mechanistic determinant of the adipose tissue:blood partition coefficients of highly lipophilic organic chemicals

The adipose tissue:blood partition coefficient (PCat:b) refers to the ratio of chemical concentration or solubility in adipose tissue and blood. The solubility of a chemical in adipose tissue or whole blood is equal to the sum total of its solubility in lipid and water fractions of these matrices. For highly lipophilic organic chemicals (HLOCs, i.e., chemicals with log n-octanol:water partition coefficients (PCo:w) greater than four), their solubility in the water fractions of both tissue and blood is negligible, and therefore their solubility in lipid fractions of tissue and blood alone determines PCat:b. Since the numerical value representing chemical solubility in lipids is likely to be the same for both blood lipids and adipose tissue lipids, the PCat:b values should be hypothetically, equal to the ratio of lipid content of adipose tissue and blood. The objective of the present study was therefore to verify whether the PCat:bs of HLOCs (volatile organics, dioxins, PCBs, PBBs, DDT) are equal to the ratio of adipose tissue and blood lipid levels. The data on lipid content of rat and human blood and adipose tissues were obtained from the literature. The calculated tissue:blood lipid ratios were comparable to the human and rat PCat:b of volatile organic chemicals, dioxins, PCBs, PBBs and/or DDT obtained from the literature. These results then suggest that, regardless of the identity and PCo:w of HLOCs, their PCat:b is equal to the ratio of lipid in adipose tissues and blood.