Statistical experimental designs were used to optimize the process of phenol degradation by Candida tropicalis Z-04,isolated from phenol-degrading aerobic granules.The most important factors influencing phenol degradation (p<0.05),as identified by a two-level Plackett-Burman design with 11 variables,were yeast extract,phenol,inoculum size,and temperature.Steepest ascent method was undertaken to determine the optimal regions of these four significant factors.Central composite design (CCD) and response surfac... 相似文献
Potassium dihydrogen phosphate (KDP) crystal, widely used for important electro-optic parts, is a typical hard-to-machine material because of its soft, brittle, and anisotropic properties. High quality is usually required for machined surfaces on KDP parts. Reported machining methods for KDP crystal include diamond turning, grinding, magnetorheological finishing, and polishing. Each of these methods has its limitations. Therefore, it is desirable to develop new machining methods for KDP crystal. This paper presents an experimental investigation on surface roughness in rotary ultrasonic machining (RUM) of KDP. It was found that the surface roughness obtained when using a tool with a chamfered corner was lower than that obtained using tools with right-angle corners. Other process variables (spindle speed, feedrate, and ultrasonic power) also affected the surface roughness obtained. 相似文献
Because the efficiency of biological nutrient removal is always limited by the deficient carbon source for the low carbon/nitrogen (C/N) ratio in real domestic sewage, the denitrifying phosphorus removal (DNPR) was developed as a simple and efficient method to remove nitrogen and phosphorous. In addition, this method has the advantage of saving aeration energy while reducing the sludge production. In this context, a pre-denitrification anaerobic/anoxic/post-aeration + nitrification sequence batch reactor (pre-A2NSBR) system, which could also reduce high ammonia effluent concentration in the traditional two-sludge DNPR process, is proposed in this work. The pre-A2NSBR process was mainly composed of a DNPR SBR and a nitrifying SBR, operating as alternating anaerobic/anoxic/post-aeration + nitrification sequence. Herein, the long-term performance of different nitrate recycling ratios (0–300%) and C/N ratios (2.5–8.8), carbon source type, and functional microbial community were studied. The results showed that the removal efficiency of total inorganic nitrogen (TIN, including NH4+-N, NO2– -N, and NO3– -N) gradually increased with the nitrate recycling ratios, and the system reached the highest DNPR efficiency of 94.45% at the nitrate recycling ratio of 300%. The optimum C/N ratio was around 3.9–7.3 with a nitrogen and phosphorus removal efficiency of 80.15% and 93.57%, respectively. The acetate was proved to be a high-quality carbon source for DNPR process. The results of fluorescence in situ hybridization (FISH) analysis indicated that nitrifiers and phosphorus accumulating organisms (PAOs) were accumulated with a proportion of 19.41% and 26.48%, respectively.
Recently, the problem of indoor particulate matter pollution has received much attention. An increasing number of epidemiological studies show that the concentration of atmospheric particulate matter has a significant effect on human health, even at very low concentrations. Most of these investigations have relied upon outdoor particle concentrations as surrogates of human exposures. However, considering that the concentration distribution of the indoor particulate matter is largely dependent on the extent to which these particles penetrate the building and on the degree of suspension in the indoor air, human exposures to particles of outdoor origin may not be equal to outdoor particle concentration levels. Therefore, it is critical to understand the relationship between the particle concentrations found outdoors and those found in indoor micro-environments. In this study, experiments were conducted using a naturally ventilated office located in Qingdao, China. The indoor and outdoor particle concentrations were measured at the same time using an optical counter with four size ranges. The particle size distribution ranged from 0.3 to 2.5 μm, and the experimental period was from April to September, 2016. Based on the experimental data, the dynamic and mass balance model based on time was used to estimate the penetration rate and deposition rate at air exchange rates of 0.03–0.25 h?1. The values of the penetration rate and deposition velocity of indoor particles were determined to range from 0.45 to 0.82 h?1 and 1.71 to 2.82 m/h, respectively. In addition, the particulate pollution exposure in the indoor environment was analyzed to estimate the exposure hazard from indoor particulate matter pollution, which is important for human exposure to particles and associated health effects. The conclusions from this study can serve to provide a better understanding the dynamics and behaviors of airborne particle entering into buildings. And they will also highlight effective methods to reduce exposure to particles in office buildings. 相似文献