Development and application of an ecosystem management approach for protected natural areas

Preservation of small natural areas is not in itself a sufficient measure to maintain the integrity of the ecosystems for which they were initially set aside. Intense pressure from recreational use is just one of the many human-caused stresses that may degrade natural areas. Therefore, land-use planning and management from an ecological perspective is necessary to assess, ensure, and in some cases increase, the ecological integrity of protected natural areas. An ecosystem management approach for small protected natural areas with high recreational use is presented, based on three interrelated components: an ecological evaluation procedure of ecosystems, the implementation of management interventions on ecosystems, and the development of a monitoring scheme of ecosystem components. The ecological evaluation procedure combines two concepts: the biotic value of vegetation and wildlife and the abiotic fragility of the soils. This combined evaluation process results in the creation of a sensitivity map that can be used as a management tool for planners and managers. Management interventions, the second component of the management approach, are derived from concepts of ecological succession. Intentional human interventions are used to maintain the ecological integrity of ecosystems or in some cases to restore degraded sites. For the third component, only the basic principles of the monitoring program will be discussed. A pilot project in one of the Montreal urban community protected areas is presented to illustrate aspects of the proposed ecosystem management approach.     

Catalytic upgrading of higher 1-alkenes from polyethylene thermal cracking by modified Wacker oxidation

The economic success of feedstock recycling procedures for plastic wastes is increasingly demanding the conversion of the starting residue into more valuable chemicals. Thermal cracking of polyethylenes leads to the preparation of equimolar mixtures of n-paraffins and 1-alkenes within the C₂–C₁₀₀ range. These 1-olefins can be catalytically upgraded by selective oxidation processes to more valuable products (e.g., ketones and fatty acids) with different uses such as polar waxes, cetane improvers, varnishes, and printer inks. The results obtained on oxidation in a modified Wacker system of a model 1-olefin (1-dodecene) as well as of a distillate cut (C₁₀–C₂₅) of the product from the thermal cracking of urban polyethylene waste are described.     

Modelling and simulation of inhibition-injection systems applied to polymerization reactors

The most critical aspect of polymerization reactors is the agitator's stop and becomes more serious when this occurs exactly at the removal of the heat load, which is generated by the reaction (exothermic). This phenomenon is typical in power-failure situations of the energy supply or because of other related problems at the plant. The objective of this work is to compare the performance of two configurations for the inhibition-injection system for vinyl chloride monomer (VCM) polymerization reactors. To determine the injection time a rigorous mathematical model was developed. From the results of this work one of the configurations was implemented in an industrial plant.     

Cost-benefit analysis as a tool for decision making in environmental projects

BACKGROUND, AIM AND SCOPE: The Damage-Function method is an efficient tool recently used in decision-making processes concerning environmental management. It is based on finding the relation between the origin of an environmental charge, and its impact on human health and the environment. The aim of the present investigation was to assess the positive impacts, also called benefits, of changes in environmental quality, and the economic viability of an industrial project on reduction of PCDD/F emissions. It has been developed with monetary criteria of two worldwide ambits: USA and European-Union countries. METHODS: The current study is a continuation of a previous investigation in which Substance Flow Analysis and Control Analysis Techniques were used to identify and to analyze all main flow values of PCDD/Fs inside the system of Tarragona Province (Spain). In the present study, Cost-Benefit Analysis (CBA) has been employed. The benefits derived from a minimization in the incidence of cancer due to a reduction in the emission of PCDD/Fs have been evaluated considering the value of a statistically saved life (VSL). Statistical analysis about uncertainty has also been incorporated. Here, the Monte Carlo simulation technique has been used. RESULTS: It is shown that CBS results depend firstly on the kind of VSL used. In fact, the differences between the decisions as a result of applying monetary criteria in USA and EU can be explained by differences between VSL values. CONCLUSION AND RECOMMENDATION: It is concluded that, for prices estimated in Euros, the emission cleaning project in the industrial plant is not feasible under any circumstance. However, although CBA seems to be a good analytical method, the final decision corresponds to the managers, who must weigh up not only the monetary criteria, but factors such as social questions.     

Phytoaccumulation of heavy metals by aquatic plants

Three aquatic plants were examined for their ability to remove heavy metals from contaminated water: parrot feather (Myriophylhum aquaticum), creeping primrose (Ludwigina palustris), and water mint (Mentha aquatic). The plants were obtained from a Solar Aquatic System treating municipal wastewater. All the three plants were able to remove Fe, Zn, Cu, and Hg from the contaminated water. The average removal efficiency for the three plant species was 99.8%, 76.7%, 41.62%, and 33.9% of Hg, Fe, Cu, and Zn, respectively. The removal rates of zinc and copper were constant (0.48 mg/l/day for Zn and 0.11 mg/l/day for Cu), whereas those of iron and mercury were dependent on the concentration of these elements in the contaminated water and ranged from 7.00 to 0.41 mg/l/day for Fe and 0.0787 to 0.0002 mg/l/day for Hg. Parrot feather showed greater tolerance to toxicity followed by water mint and creeping primrose. The growth of creeping primrose was significantly affected by heavy metal toxicity. The selectivity of heavy metals for the three plant species was the same (Hg>Fe>Cu>Zn). The mass balance preformed on the system showed that about 60.45-82.61% of the zinc and 38.96-60.75% of the copper were removed by precipitation as zinc phosphate and copper phosphate, respectively.     

Evaluation of the effectiveness of horizontal subsurface flow constructed wetlands for different media

Two media bed (gravel and Filtralite NR) were tested in a mesocosm to evaluate the removal of organic matter (as chemical oxygen demand (COD)),ammonia (NH4-N),nitrite,nitrate and solid matter (as total suspended solids (TSS)) for a synthetic wastewater (acetate-based) and a domestic wastewater.The use of Filtralite allowed average removal rates (6–16.8 g COD/(m2·day),0.8–1.1 g NH4-N/(m2·day) and 3.1 g TSS/(m2·day)) and removal effciencies (65%–93%,57%–85% and 78% for COD,NH4-N and TSS,respectively),higher than that observed in the experiments with gravel.The applied loads of COD,ammonia,nitrate and TSS seem to influence the respective removal rates but only for the treatment of domestic wastewater with higher correlation coefficients for Filtralite.Regardless the type of media bed and the type of wastewater,nitrate was completely removed for nitrogen loading rates up to 1.3 g NO3-N/(m2·day).There was no evidence of the influence of nitrate loads on the removal of organic matter.     

Innate humoural immunity is related to eggshell bacterial load of European birds: a comparative analysis

Fitness benefits associated with the development of a costly immune system would include not only self-protection against pathogenic microorganisms but also protection of host offspring if it reduces the probability and the rate of vertical transmission of microorganisms. This possibility predicts a negative relationship between probabilities of vertical transmission of symbionts and level of immune response that we here explore inter-specifically. We estimated eggshell bacterial loads by culturing heterotrophic bacteria, Enterococcus, Staphylococcus and Enterobacteriaceae on the eggshells of 29 species of birds as a proxy of vertical transmission of bacteria from mother to offspring. For this pool of species, we also estimated innate immune response (natural antibody and complement (lysis)) of adults, which constitute the main defence against bacterial infection. Multivariate general linear models revealed the predicted negative association between natural antibodies and density of bacteria on the eggshell of 19 species of birds for which we sampled the eggs in more than one nest. Univariate analyses revealed significant associations for heterotrophic bacteria and for Enterobacteriaceae, a group of bacteria that includes important pathogens of avian embryos. Therefore, these results suggest a possible trans-generational benefit of developing a strong immune system by reducing vertical transmission of pathogens.     

Development of a loading dock safety evaluation tool

INTRODUCTION: Companies that use forklifts to load and unload trucks at loading docks are well aware of the main danger associated with this type of activity (i.e., the possibility of the forklift falling or tipping over when the truck suddenly moves away from the dock). Even if various truck restraint measures can be implemented to reduce the possibility of this type of accident, a number of hazardous incidents that result in a forklift tipping over from a loading dock still do occur regularly in day-to-day activities. This situation has brought experts to examine and evaluate the effectiveness of different measures and systems depending on the context in which they are used. METHODS: The present study touched upon both the technical and the organizational aspects of the restraint measures that could have an impact on safety. Certain elements were examined very closely, especially the failure of mechanical devices and their relation to the environment in which they are used, as well as the systemic interaction between people and the various restraint measures in use in a given context. CONCLUSION: This article presents a safety evaluation tool regarding restraint measures or systems for trucks docked at loading platforms - a tool that, of course, would take into consideration both the specific contextual aspects related to the docking bay itself, and to the plant. IMPACT ON INDUSTRY: This tool is designed to help companies choose the optimal safety measures to implement, while remaining realistic in terms of the technical and economic aspects of any given situation.     

Safety culture: analysis of the causal relationships between its key dimensions

INTRODUCTION: Several fields are showing increasing interest in safety culture as a means of reducing accidents in the workplace. The literature shows that safety culture is a multidimensional concept. However, considerable confusion surrounds this concept, about which little consensus has been reached. METHOD: This study proposes a model for a positive safety culture and tests this on a sample of 455 Spanish companies, using the structural equation modeling statistical technique. RESULTS: Results show the important role of managers in the promotion of employees' safe behavior, both directly, through their attitudes and behaviors, and indirectly, by developing a safety management system. IMPACT ON INDUSTRY: This paper identifies the key dimensions of safety culture. In addition, a measurement scale for the safety management system is validated. This will assist organizations in defining areas where they need to progress if they wish to improve their safety. Also, we stress that managers need to be wholly committed to and personally involved in safety activities, thereby conveying the importance the firm attaches to these issues.