石化特种设备管理现状及风险控制对策

为加强特种设备管理,提高风险控制水平,对中国特种设备的管理法规标准体系、中国石化特种设备管理现状及存在的问题,进行了讨论和思考,并提出了石化特种设备风险控制对策。     

高含硫气田用电阻探针的适用性改造

针对电阻探针在普光高含硫气田腐蚀监测系统应用中出现了大量本体焊接部位断裂、断面密封失效现象,测试分析显示高含硫、高压及高流速冲击震动导致焊缝腐蚀疲劳失效和密封材料老化失效。通过采用锻造态不锈钢棒料整体制造消除了电阻探针壳体的焊接,采用金属密封复合抗硫密封胶对测试片断面密封方式进行改进优化。现场应用表明,改进后的电阻探针不再出现断裂,密封失效现象大幅减少,使用寿命整体提高3倍以上。     

户外长距离运动中雾霾影响的指标分析研究

居民在雾霾天气进行户外长距离运动会使心肺功能受到影响,对户外长距离运动中雾霾影响的指标进行分析,从人数、心情和健康三个角度研究,研究方法为调查对比法,通过分析在雾霾天气下和正常天气下运动员的不同表现,验证雾霾对户外长距离运动的影响。研究结果表明,雾霾天气会打消居民进行户外长距离运动的积极性,减少运动人数,同时使人们感到抑郁烦闷,心情低落。长时间在雾霾天气下运动心肺功能也会受到影响,调查结果具有统计学意义。     

基于医疗大数据的空气污染类疾病信息分析研究

世界卫生组织表示,空气污染为造成全球疾病负担的一项重要因素,能够导致心血管疾病、呼吸系统疾病等各种疾病的发生,空气污染问题已经成为公共卫生领域关注的重点问题,对基于医疗大数据的空气污染类疾病信息进行分析。利用半参数广义相加的泊松回归模型,在控制时间、长期趋势、气象因素等一些复杂条件的基础上,对2012年1月1日至2016年12月31日,某市空气中SO2、PM10和NO2等一些主要空气污染物的监测浓度值与呼吸系统疾病(肺炎以及支气管炎与哮喘)住院人数的相关性进行研究,研究结果表明,空气颗粒物PM10对患病率的影响相对于气态污染物SO2、NO2更为严重。     

Separation of selected PAHs by using high performance capillary electrophoresis with modifiers

The effect of varying SDS concentration in a micellar electrokinetic capillary chromatographic system (MECC) is investigated. In addition, the introduction of -cyclodextrin as modifier to the electrophoretic medium, containing SDS and a phosphate-borate buffer, is shown to give satisfactory separation of the seven selected PAHs. The separation efficiency is increased with the addition of -cyclodextrin.     

8-氨基喹啉-5-偶氮-对苯酚荧光光度法测定微量铬(Ⅵ)

在盐酸介质中,铬(Ⅵ)与AQAPOH形成可被氯仿萃取的荧光化合物,其λex/λem=295nm/400nm.线性范围为0-1.0μg Cr(Ⅵ)/25ml(水相),检测限为0.7μg/L.除Mn(Ⅶ)外,常见金属离子无干扰,可在数千倍Cr(Ⅲ)存在下测定废水中微量铬(Ⅵ).初步探讨了荧光反应的机理.     

Analysing the sensitivity behaviour of two hydrology models

Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects) and the extent these parameters interact with each other (second-order effects). This method requires the specification of two parameters (runs and resolution) that control the sampling of the output parameter to determine its sensitivity to various inputs. The criteria for these parameters have been set on the analysis of a well-behaved analytical function (see Cropp and Braddock, Reliab. Eng. Syst. Saf. 78:77–83, 2002), which may not be applicable to other physical models that describe complex processes. This paper will investigate the appropriateness of the criteria from (Cropp and Braddock, 2002) and hence the effectiveness of the New Morris Method to determine the sensitivity behaviour of two hydrologic models: the Soil Erosion and Deposition System and Griffith University Representation of Urban Hydrology. In the first case, this paper will separately analyse the sensitivity of an output parameter on a set of input parameters (first- and second-order effects) for each model and discuss the physical meaning of these sensitivities. This will be followed by an investigation into the sampling criteria by exploring the convergence of the sensitivity behaviour for each model as the sampling of the parameter space is increased. By comparing these trends to the convergence behaviour from Cropp and Braddock (2002), we will determine how well the New Morris Method estimates the sensitivity for each model and whether the sampling criteria are appropriate for these models. It will be shown that the New Morris Method can provide additional insight into the functioning of these models, and that, under a different metric, the sensitivity behaviour of these models does converge confirming the sampling criteria set by Cropp and Braddock.     

水中Mg~(2+)的测试管快速测定

研制了一种测定水中Mg2 + 的测试管 ,测定范围为 0 .5mg/L～ 2 .0mg/L。该测试管适用于现场应急监测 ,具有快速、简便、抗干扰能力强和价格低廉等特点     

连续采样与五日法采样效果及费用的对比分析

通过对连续采样与五日法采样五种方法监测结果及所需费用的比较，得出连续采样方法监测结果更具有代表性，合理性，一次性投资大，但运行费用并不高的结论。     

Development of an ombrotrophic peat bog (low ash) reference material for the determination of elemental concentrations

Given the increasing interest in using peat bogs as archives of atmospheric metal deposition, the lack of validated sample preparation methods and suitable certified reference materials has hindered not only the quality assurance of the generated analytical data but also the interpretation and comparison of peat core metal profiles from different laboratories in the international community. Reference materials play an important role in the evaluation of the accuracy of analytical results and are essential parts of good laboratory practice. An ombrotrophic peat bog reference material has been developed by 14 laboratories from nine countries in an inter-laboratory comparison between February and October 2002. The material has been characterised for both acid-extractable and total concentrations of a range of elements, including Al, As, Ca, Cd, Cr, Cu, Fe, Hg, Mg, Mn, Na, Ni, P, Pb, Ti, V and Zn. The steps involved in the production of the reference material (i.e. collection and preparation, homogeneity and stability studies, and certification) are described in detail.