喷淋环栅式除尘脱硫反应器的数学模拟

研制了一种由内外圈构成的喷淋环栅式除尘脱硫反应装置,气、液两相在内外圈之间通向运动,紊流冲激环栅时接触传质。基于溶质渗透理论,提出了以内塔穿孔速率V,液气比L/G,吸收浆液pH值为参数的脱硫效率模型。对比某电厂工况条件下测得的一系列实验数据,显示出该模型与实际情况具有良好的一致性,表明该模型可以用来作为工程设计、最优化技术和推测工业数据的理论参考工具。     

创新环境执法:以生物监控敏感项目排水毒性

编者按 江苏省某敏感化工项目曾因超标排污引发跨地区厂群纠纷被责令停产整改.省环保厅创新执法思路,采用生物监测塘强化管理与监督,探索用鱼作为检测评价废水毒性的指示生物,结果表明该项目整改后排水的毒性很低,证实了用生物监测塘强化环境执法的科学性和有效性.该措施可推广应用于全国类似情况,强化对敏感污染源排放的监督和对饮用水源地安全的监控.本文总结了江苏省应用生物监测强化环境执法的具体做法,以供各相关单位借鉴.     

河南双河油泥在生物降解过程中饱和烃污染物的组成与分布

分析了河南双河油泥在微生物降解过程中烷烃的组成与分布特征,结果表明,XT-4、F-2、C-2、A-1和AB-1菌的混合菌对饱和烃组分有好的降解效果:当饱和烃含量在60~70g/kg范围时,经过120d的降解,饱和烃降解率达到66.4%,随着降解的进行,正构烷烃分布由单峰形变成了双峰形;萜烷类抗微生物降解能力强,在本实验条件下,其组成与分布没有发生显著变化。微生物对烷烃类化合物易降解顺序为:正构烷烃>类异戊二烯烃>藿烷类,C21以前的正构烷烃>C22以后的正构烷烃,姥鲛烷>植烷,Tm>Ts,藿烷>莫烷。     

污水直接膜过滤用于农灌可行性试验

本试验尝试用膜直接截留污水中对人体健康有害的细菌病毒,而保留水中对作物有益的氮、磷等营养元素,以期实现水、肥双成分资源化。试验结果表明,无论是微滤膜还是超滤膜均对细菌及粪大肠菌有很高的截留率(99.9%～99.999%),污水中有机物、氮与磷的保留率分别为32%～67%、72%～78%和60%～62%。用渗滤液灌溉的小麦较之清水灌溉和常规灌溉的小麦,麦穗单重分别提高13%和7.5%。     

生物浮选法处理含油污泥

利用从石油污染物中分离的一组微生物菌株对胜利油田含油污泥进行了生物浮选处理,探讨了处理过程中温度、稀释率、投加菌量及加糖量等因子对油去除率的影响及组合菌株与单一菌株处理效果的差异。通过实验获得生物浮选最佳运行参数为:温度40℃,稀释率98%,加菌量3.75%,加糖量0.25%,在该参数运行条件下,原油去除率可达95%以上。使用混合菌株进行生物浮选有利于回收原油中含油量的提高。     

利用人工湿地系统深度处理城市污水尾水

利用垂直复合流模拟人工湿地系统对城市污水厂尾水进行深度处理实验研究,植物床选用美人蕉、菖蒲、茭草、芋头和象草混合栽种,采用石英砂为主体填料。实验研究表明:人工湿地系统在停留时间为24h,水力负荷为0.4m3(m2·d)的运行条件处理效果较佳,在此条件下连续稳定运行10个月,处理后的尾水主要指标达到(GBT189212002)标准。     

含油污泥体膨颗粒调剖剂的研究

研究了利用含油污泥制备体膨颗粒深部调剖剂的技术。试验表明,在单体浓度20%、干泥含油率14%、污泥占单体质量110%、交联剂占单体质量0.14%、反应温度35℃条件下,聚合产物性能较好。胶块造粒过程中需加入适量减阻剂,粒度可根据实际要求调整。含油污泥体膨颗粒调剖剂在自来水中和0.5%NaCl水溶液中的膨胀倍数分别为40倍和15倍,膨胀后强度和弹性好。     

利用废渣盐石膏制作轻型墙体材料

研究利用海盐化工产生的废渣盐石膏经过一定工艺处理,生产轻型墙体材料盐石膏空心条板,该产品与天然石膏空心条板相比,原料采用及生产工艺都有较大改进,生产成本却大幅度下降。经测试,该产品完全可替代天然石膏空心条板,技术性能指标达到了国家规定的相关标准。     

UASB法处理城市生活垃圾焚烧场渗滤液

垃圾焚烧场的渗滤液具有pH低、污染成分复杂、COD_(Cr)浓度高、可生化性好等特点。本研究探索了UASB法处理焚烧场渗滤液时的快速启动方法,考察了水力停留时间、容积负荷对COD_(Cr)去除率的影响及产气量与COD_(Cr)去除率的关系,结果表明,在水力停留时间6d、容积负荷5kg/(m3.d)的情况下,COD_(Cr)去除率可达到93%,每升原水产气量可达22.5L,折合热值492.7kJ。     

Modeling methyl isothiocyanate soil flux and emission ratio from a field following a chemigation of metam-sodium

Metam-sodium had become the most heavily used soil fumigant in recent years as the deadline approached for methyl bromide to phase out in January 2005. After application, metam-sodium decomposes rapidly to methyl isothiocyanate (MITC), a highly toxic compound capable of killing a wide spectrum of soil-borne pests. Inhalation risk of MITC ranked high among airborne agricultural pesticides in California. Information about off-gassing intensity and percentage of emission is essential for exposure risk assessment and mitigation measures, but is limited, especially for new application methods such as drip chemigation. Air concentrations of MITC were monitored around a field treated with metam-sodium through surface drip irrigation system. The field was tarped with plastic films before the chemigation. The air concentrations at receptor locations were simulated for the period of air monitoring with the Industrial Source Complex (ISC3) Dispersion Model, and soil flux density of MITC at various periods after chemigation was estimated through a back-calculation procedure. The estimated soil flux density of MITC showed a diurnal pattern, with the daytime flux stronger than nighttime. However, the average air concentration at nighttime was higher than that at daytime. Soil flux density peaked at 4.30 microg m-2 s-1 in the first 12-h period after chemigation, then declined with time. The MITC emission percentage in the first 60-h was 2.65% of applied mass, of which 57% occurred in the first 24-h after chemigation. The study indicated that the tarped bed drip application method of metam-sodium had a relatively good control of MITC emission from soil.