Microbial reduction of uranium (VI) by Bacillus sp. dwc-2: A macroscopic and spectroscopic study

The microbial reduction of U(VI) by Bacillus sp. dwc-2, isolated from soil in Southwest China, was explored using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption near edge spectroscopy (XANES). Our studies indicated that approximately 16.0% of U(VI) at an initial concentration of 100 mg/L uranium nitrate could be reduced by Bacillus sp. dwc-2 at pH 8.2 under anaerobic conditions at room temperature. Additionally, natural organic matter (NOM) played an important role in enhancing the bioreduction of U(VI) by Bacillus sp. dwc-2. XPS results demonstrated that the uranium presented mixed valence states (U(VI) and U(IV)) after bioreduction, which was subsequently confirmed by XANES. Furthermore, the TEM and high resolution transmission electron microscopy (HRTEM) analysis suggested that the reduced uranium was bioaccumulated mainly within the cell and as a crystalline structure on the cell wall. These observations implied that the reduction of uranium may have a significant effect on its fate in the soil environment in which these bacterial strains occur.     

臭氧/活性炭协同作用去除二级出水中DON

为探讨臭氧氧化和活性炭吸附对城市污水厂二级出水中溶解性有机氮(DON)的去除机制,首先测定二级出水DON、溶解性有机炭(DOC)、UV254、pH值等指标.接着通过臭氧氧化试验和活性炭吸附试验来考察二级出水中DON、DOC和UV254变化,以及DON分子量分布和DON亲疏水性变化,并应用三维荧光光谱对二级出水中DON变化进行表征.结果表明,当臭氧投加量为8mg/L,DON的去除率大约为33.9%,DOC和UV254去除率约21.2%、66.7%;当活性炭投加量为2.0g/L,DON、DOC和UV254的去除率大约为43.4%、27.6%、92.2%;臭氧氧化和活性炭吸附组合试验时,对DON的去除率大约为83.3%和81.5%;臭氧氧化提高小分子量( 20kDa)的DON所占比例;活性炭吸附降低小分子量( 20kDa)DON所占比例为;臭氧氧化和活性炭吸附都提高亲水性DON所占比例,而降低疏水性和过渡性DON所占比例;三维荧光光谱证实,二级出水中DON变化与3个主要峰有关,分别代表物质为色氨酸类蛋白质、芳香族类蛋白质和富里酸类物质.     

The role of doped-Mn on enhancing arsenic removal by MgAl-LDHs

To meet the challenges posed by global arsenic water contamination, the MgAlMn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the arsenate removal performance of the LDHs, the cluster models of the MgAlMn-LDHs and MgAl-LDHs were established and calculated by using density functional theory (DFT). The results shown that the doped-Mn can significantly change the electronic structure of the LDHs and improve its chemical activity. Compared with the MgAl-LDHs that without the doped-Mn, the HOMO-LUMO gap was smaller after doping. In addition, the -OH and Al on the laminates were also activated to improve the adsorption property of the LDHs. Besides, the doped-Mn existed as a novel active site. On the other hand, the MgAlMn-LDHs with the doped-Mn, the increased of the binding energy, as well as the decreased of the ion exchange energy of interlayer Cl⁻, making the ability to arsenate removal had been considerably elevated than the MgAl-LDHs. Furthermore, there is an obvious coordination covalent bond between arsenate and the laminates of the MgAlMn-LDHs that with the doped-Mn.     

Layered sphere-shaped TiO2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO₂ nanosphere materials, which were formed by layered deposition of multiple anatase TiO₂ nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO₂ nanosheet, including crystal steps and edges, thereby fixing the Au–TiO₂ perimeter interface. Reactant transfer occurred along the gaps between these TiO₂ nanosheet layers and in contact with catalytically active sites at the Au–TiO₂ interface. The doped Au induced the formation of oxygen vacancies in the Au–TiO₂ interface. Such vacancies are essential for generating active oxygen species (*O⁻) on the TiO₂ surface and Ti^3 + ions in bulk TiO₂. These ions can then form Ti^3 +–O⁻–Ti^4 + species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO₂ samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.     

用水基表面活性剂乳液回收废白土中蜡的界面张力研究

通过测定液体与废白土粉末之间的接触角及液体与蜡之间的液液界面张力，对水基表面活性剂乳液的溶剂及配方进行了优选，得到最佳的水基面活性剂乳液的组成为：质量分数０．２％的十二烷基苯磺酸钠＋体积分数为２．５％的乙醇＋体积分数为２５％的混合烃（正己烷＋苯，等体积）＋体积分数为７２．５％的水。实验证明，用该水基表面活性剂乳液处理废白土，蜡的回收率可达８０％，同时不破坏白土的颗粒结构。     

混合重金属对硝化颗粒污泥毒性作用的析因实验研究

分别测定了Cu2 、Zn2 和Cd2 对硝化颗粒污泥的单一毒性,采用析因实验研究了二元和三元重金属混合体系对硝化颗粒污泥的联合毒性.结果表明,Cu2 、Zn2 和Cd2 的2 h半抑制浓度EC50分别为95.23、62.11和12.48 mg/L,由析因实验所得的响应曲面模型具有较好的优度(其R2＞0.95),能够对混合体系的联合毒性很好地进行预测,析因实验可以用于环境领域混合体系联合毒性的研究.     

热带海洋环境中5083铝合金腐蚀行为研究

目的 研究某岛礁不同海洋区带环境中5083铝合金的腐蚀规律。方法 在某岛礁进行海洋多区带腐蚀试验,利用表面微观形貌观测、腐蚀产物分析、质量损失测试及点蚀深度测量等手段,对比分析铝合金在不同海洋区带中的腐蚀形貌、腐蚀速率和点蚀深度。结果 5083铝合金在某岛礁海洋全浸区带环境中的腐蚀速率最大,大气区带中的腐蚀速率最小,在潮差区带的腐蚀速率介于二者之间。试样在海洋不同区带主要发生局部腐蚀,大气区试样的最大点蚀深度最大,而潮差区试样的最大点蚀深度最小。在不同海洋区带,铝合金腐蚀产物和附着物的混合物中均含有钙元素,大气区钙元素含量远低于潮差区和全浸区,潮差区和全浸区铝合金表面的腐蚀产物和附着物混合物中主要含有CaCO₃、CaSiO₃和Al₂O₃。结论 不同海洋区带环境中,5083铝合金的腐蚀速率差别较大,潮差区和全浸区材料表面附着大量污损生物和矿物质。     

北京地铁站灰尘中重金属污染特征及健康风险评价

采集了北京地铁16个站点灰尘的样本,测定了灰尘中7种重金属Cr、Cd、Cu、Ni、Hg、Pb、As的浓度,并采用地累积指数法、美国EPA风险评价模型和Spearman相关系数分析,对重金属污染程度、人体健康风险及来源进行分析.结果表明, Cr、Cd、Cu、Ni、Hg、Pb、As的含量分别为131.92,1.11,67.33,41.77,0.35,437.41,9.09mg/kg,均超过北京土壤背景值.地累积指数呈现Pb>Hg>Cd>Cr>Cu>Ni>As,其中Pb、Hg、Cd分别为3.77,3.12,2.16,达到严重污染.人体健康风险评价表明,存在的非致癌风险依次为Pb>Cr>As>Ni>Cu>Hg>Cd,除Pb外,均不构成明显的风险.Cr、Cd、Ni、As致癌风险均低于风险阈值,不会对人体造成健康危害.人类活动、刹车系统和轨道摩擦可能是造成地铁站灰尘重金属来源的原因.     

废纸造纸废水结垢原因及防治对策研究

针对无锡某废纸造纸企业产生的污水经厌氧-好氧-化学混凝处理后,出水在放流池产生结垢现状,对各段污水中主要离子浓度进行跟踪分析,并对结垢的组分、结垢原因、机理和防治结垢对策进行了探讨。结果表明:垢样的主要成分为CaCO3;污水中含有较高浓度的钙离子和碳酸氢根离子是导致结垢的主要原因,较高的水温、pH值、流速、流动状态、池壁的粗糙程度以及PAC的投加对结垢也有一定的影响;最佳防治对策为使用Ca(OH)2+PAM代替PAC+PAM混凝,保证COD达标排放同时,也解决了出水结垢问题。     

工业废水中多金属离子的吸附净化

以含有Si、Al、Ca、C元素的矿物材料作为基质,经特定条件处理后造粒成型加工成轻质多孔Si-Al-Ca-C结构的吸附材料。研究了该吸附材料对工业废水中多种金属离子的吸附性能,探讨了影响吸附性能的因素。研究结果表明,在一定条件下,Si-Al-Ca-C吸附材料对工业废水中Al3+、Ca2+、Mn2+、Cu2+、Fe3+、Mg2+、As3+和Zn2+的净化率分别高达99.34%、99.82%、98.26%、98.16%、97.76%、97.01%、100%和89.09%。金属离子残留浓度分别为0.152、0.07、0.012、0.02、0.119、0.311、0和0.259 mg/L,均低于国家污水综合排放标准(GB8978-1996)一级标准。