阳极溶出伏安法、石墨炉原子吸收法测定海水中总铬的方法比较研究

铬是海洋水体中的痕量重金属之一,海水的高盐基体对铬的测定有严重的干扰,而且海水中同时存在Cr(Ⅲ)和Cr(Ⅵ),两种不同价态给测定也带来了一定难度。文章从Cr(Ⅲ)的氧化率、方法检出限、精密度、实际样品加标等方面对过氧化氢氧化-阳极溶出伏安法与传统的MIBK萃取-无火焰原子吸收分光光度法进行了比较研究,发现两种方法在测试结果上无显著差异,但是过氧化氢氧化-阳极溶出伏安法具有更高的精密度,更低的检出限,且对Cr(Ⅲ)的回收率略有提升。     

关于高校绿色教育环境下中华传统体育文化探讨

针对高校绿色教育环境下中华传统体育文化的探讨问题,给出了高校绿色教育的基本理论,包括高校绿色教育的概念,高校绿色教育的特点,包括高校绿色教育的生命性、高校绿色教育的生活性、高校绿色教育的人文性和高校绿色教育的内容与实践,探讨了高校绿色教育环境与中华传统体育文化的发展,包括高校绿色教育环境与中华传统体育文化的价值、高校绿色教育环境与中华传统体育文化的发展,最后,对高校绿色教育环境与中华传统体育文化的互动进行了说明。     

基于医疗大数据的空气污染类疾病信息分析研究

世界卫生组织表示,空气污染为造成全球疾病负担的一项重要因素,能够导致心血管疾病、呼吸系统疾病等各种疾病的发生,空气污染问题已经成为公共卫生领域关注的重点问题,对基于医疗大数据的空气污染类疾病信息进行分析。利用半参数广义相加的泊松回归模型,在控制时间、长期趋势、气象因素等一些复杂条件的基础上,对2012年1月1日至2016年12月31日,某市空气中SO2、PM10和NO2等一些主要空气污染物的监测浓度值与呼吸系统疾病(肺炎以及支气管炎与哮喘)住院人数的相关性进行研究,研究结果表明,空气颗粒物PM10对患病率的影响相对于气态污染物SO2、NO2更为严重。     

Population structure and sex-change in the coral-inhabiting snailCoralliophila violacea at Hsiao-Liuchiu,Taiwan

Surveys of the coral-inhabiting snailCoralliophila violacea (Lamarck) (=C. neritoidea Kiener) were made on shallow fringing reefs (<8 m deep) around Hsiao-Liuchiu, Taiwan, between July and October 1990. The snails were aggregated into patches on the surface of massive poritid coral colonies. Coral colonies >40 cm in diameter were more likely to bear patches of snails than smaller colonies, and also to have more snails. The coralliophilids ranged from 5 to 30 mm in aperture length. The sex ratio of the population was biased toward males (539:279), with only a few small individuals of indistinguishable sex. Snails between 6 and 10 mm were all males, while most snails with aperture lengths 20 mm were females. Judging from the distinct size ranges of males and females within patches and from the observed degeneration of the penis, the snails may have changed sex from male to female with increasing size. Sex-change may occur across a wide size range (10 to 20 mm). The correlation of smallest female size and largest male size among patches indicates that snail size at sex-change is peculiar to each individual patch. Those females in patches with a single female (but many males) were significantly smaller than females in multiple-female patches. It is likely that in the absence of females males change sex at a smaller size, whereas in the presence of large females males delay sexchange until they have reached a larger size. The plasticity of size at sex-change may be adaptive and a result of natural selection at the individual level.     

Separation of selected PAHs by using high performance capillary electrophoresis with modifiers

The effect of varying SDS concentration in a micellar electrokinetic capillary chromatographic system (MECC) is investigated. In addition, the introduction of -cyclodextrin as modifier to the electrophoretic medium, containing SDS and a phosphate-borate buffer, is shown to give satisfactory separation of the seven selected PAHs. The separation efficiency is increased with the addition of -cyclodextrin.     

水中Mg~(2+)的测试管快速测定

研制了一种测定水中Mg2 + 的测试管 ,测定范围为 0 .5mg/L～ 2 .0mg/L。该测试管适用于现场应急监测 ,具有快速、简便、抗干扰能力强和价格低廉等特点     

连续采样与五日法采样效果及费用的对比分析

通过对连续采样与五日法采样五种方法监测结果及所需费用的比较，得出连续采样方法监测结果更具有代表性，合理性，一次性投资大，但运行费用并不高的结论。     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

Development of an ombrotrophic peat bog (low ash) reference material for the determination of elemental concentrations

Given the increasing interest in using peat bogs as archives of atmospheric metal deposition, the lack of validated sample preparation methods and suitable certified reference materials has hindered not only the quality assurance of the generated analytical data but also the interpretation and comparison of peat core metal profiles from different laboratories in the international community. Reference materials play an important role in the evaluation of the accuracy of analytical results and are essential parts of good laboratory practice. An ombrotrophic peat bog reference material has been developed by 14 laboratories from nine countries in an inter-laboratory comparison between February and October 2002. The material has been characterised for both acid-extractable and total concentrations of a range of elements, including Al, As, Ca, Cd, Cr, Cu, Fe, Hg, Mg, Mn, Na, Ni, P, Pb, Ti, V and Zn. The steps involved in the production of the reference material (i.e. collection and preparation, homogeneity and stability studies, and certification) are described in detail.     

离子交换树脂光度法测定微量铁的研究

研究了以阳离子交换树脂为显色载体，利用直接吸附在树脂上有色络合物－Fe(II)邻二氮菲的吸光度，借以检测水和火腿肠中铁的新方法，本法具有比原子吸收法更高的灵敏度，稳定性和选择性，并对成络及树脂吸附条件作了较详细研究。