固相萃取-气相色谱法测定水样中马拉硫磷残留

采用C-18小柱萃取、毛细管柱分离、气相色谱氢火焰离子化检测器（FID）测定水样中的马拉硫磷,检测限为0．12μg／L。试验了样品流量和洗脱剂对回收率的影响,结果表明样品流量为6mL／min、二氯甲烷作洗脱剂时,回收率较好。测定蒸馏水、地下水和河水样品,相对标准偏差〈2．2％。加标回收率在79．0％-109％之间。     

CO2 emission driving forces and corresponding mitigation strategies under low-carbon economy mode: evidence from China’s Beijing–Tianjin–Hebei region

On account of the background of China’s “new normal” characterized by slower economic growth, this paper analyses the low-carbon economy status quo in the Beijing–Tianjin–Hebei region and empirically investigates the relationship between carbon dioxide (CO₂) emissions and its various factors for China’s Beijing–Tianjin–Hebei region using panel data econometric technique. We find evidence of existence of Environmental Kuznets Curve. Results also show that economic scale, industrial structure, and urbanization rate are crucial factors to promote CO₂ emissions. However, technological progress, especially the domestic independent research and development, plays a key role in CO₂ emissions abatement. Next, we further analyze the correlation between each subregion and various factors according to Grey Relation Analysis. Thereby, our findings provide important implications for policymakers in air pollution control and CO₂ emissions reduction for this region.     

水环境中石油类物质分析方法探讨

在详述了国内外石油类分析方法的基础上,对各方法的适用范围、优缺点及可比性进行了深入分析,阐述了各类方法存在的共性问题,指出按照石油类物质毒性大小分别定量分析的方法将是未来的发展趋势。     

Spatial simulation and LCA evaluation on the plastic waste recycling system in Tianjin

With the rapid economic development in China, the amount of plastic waste (PW) generated has greatly increased and much of the waste is currently not treated. To reduce greenhouse gas (GHG) emissions from recycling of PW, we estimated the PW flow and considered methods to improve the household PW recycling system in Tianjin by adjusting processes during transportation and establishing a PW recycling factory in Zi’ya Industrial Park. The goal of the study was to identify reasonable improvements for the recycling system and clarify the environmental load. Geographic information system (GIS) technology was used to simulate transport processes for comparing GHG emissions from the transport processes between the present case and an improved case. Life cycle assessment (LCA) was used to compare GHG emissions between a projected scenario and a baseline scenario. Estimated GHG emissions during transport processes in the improved case were reduced by about 12,197 t CO₂ eq per year compared to the present case, equivalent to about 65.9 % of the total emissions in the present case. GHG emissions in the projected scenario were about 101,738 t CO₂ eq less per year than the baseline scenario, equivalent to about 75.5 % of the total emissions in the baseline scenario.     

Preparation of biochar catalyst with saccharide and lignocellulose residues of corncob degradation for corncob hydrolysis into furfural

This paper presented a novel process for production of furfural by hydrothermal degradation of corncob over biochar catalyst, in which it was prepared with the recycling degradation solution and lignocellulosic solid residues. The biochar catalyst was papered by lignocellulose residues and concentrated saccharide solution, and then impregnated in 0.5 mol/L sulphuric acid at room temperature for 24 h assisted by the ultrasonic vibration. In the system of recycling, 8.8 % lignocellulose residues and 100 % concentrated saccharide solution from corncob hydrolysis have been recycled. Hydrolysis of corncob was carried out at 180 °C for duration of 170 min over the biochar catalyst. The experimental results have shown that the furfural yield of up to 37.75 % and overall corncob conversion rate of 62.00 % could be achieved under optimum operating conditions for the catalysts preparation and the corncob hydrolysis. It is believed that the acid density of 4.27 mmol/g of biochar catalyst makes the SO₃H groups cleave β-1,4 glycosidic linkages effectively and hydrolyze the cellulose and hemicellulose to water-soluble sugars, as well as to facilitate dehydration of xylose to give the product of furfural.     

肠道微生物对土壤中铜、锌、锰生物可给性的影响

为了更全面、准确地评价土壤中金属元素对人体的健康风险,研究土壤中金属元素在结肠阶段的生物可给性具有重要意义。通过采集我国一些地区的6种土壤,利用in vitro方法(PBET和SHIME联用)研究土壤中Cu、Zn、Mn在胃、小肠、结肠阶段的生物可给性。研究显示,土壤中Cu、Zn、Mn在胃阶段的生物可给性分别为23.8%~63.0%、21.2%~64.4%、11.7%~35.6%;从胃阶段到小肠阶段,土壤中Cu的生物可给性提高了0.4%~14.4%,而土壤中Zn在小肠阶段的生物可给性降低了6.7%~38.7%。结肠阶段,土壤中Cu、Zn、Mn的生物可给性分别为2.4%~12.9%、5.7%~18.7%、6.2%~18.9%,与小肠阶段相比,分别降低了21.7%~56.9%、0.4%~36.8%、4.5%~19.1%。结果表明,在肠道微生物存在的情况下,土壤中Cu、Zn、Mn在结肠阶段有较低的人体健康风险。     

蔬菜常用农药在地下水中残留风险评估

为明确蔬菜常用农药在地下水中的环境风险,运用China-Pearl和SCI-GROW模型开展地下水环境暴露评估,并根据我国成人和儿童暴露参数推导25种农药预测无效应浓度(PNEC)。研究发现,25种农药PECgw为0~18.340μg·L-1,成年人PNECgw为0.003~19.654 mg·L-1,儿童PNECgw为0.001~23.253 mg·L-1。成年人和儿童的RQgw值均小于1,表明25种农药按照登记用量使用,我国成人和各年龄阶段儿童直接饮用施用农药区域地下水的环境风险可接受。     

农药环境风险评估中常用的计算毒理学模型软件

农药的大量使用为我国带来了严重的环境和健康问题,仅依靠传统生物测试和环境监测的方法已经不能满足农药风险评估的需要。利用计算毒理学模型,可以实现农药的高通量风险评估。本文主要介绍了农药环境风险评估中常用免费的EPI Suite、QSAR Toolbox和PBT Profiler等定量结构-活性关系(Quantitative Structure-Activity Relationship,QSAR)模型软件和SCIGROW、PRZM-GW、China-PEARL和EQC等环境多介质模型软件,以期能为农药的风险评估和科学管理提供参考。     

二元联合作用藻红外测试方法——以重金属为例

为检验二元联合作用藻红外测试方法的可行性,用Cu~(2+)、Fe3+、Mn~(2+)、Al3+、Cr3+、Hg~(2+)、Cd~(2+)、Pb~(2+)、Zn~(2+)进行了二元联合作用测试实验。结果显示:联合药液的参照浓度与单药液的参照浓度比为0.5:0.25的有15组二元组合,为2.0:1.0的有10组二元组合,为1.0:0.5的有11组二元组合;在9种重金属的36组二元联合作用测试结果中出现拮抗作用、相加作用、协同作用,表明联合作用类型表现出多样性;14组拮抗作用中单组的再现性为50%~100%、多组的再现性的出现率为93%、单组的重现性为67%~100%、多组的重现性的出现率为100%,21组相加作用中单组的再现性为50%~100%、多组的再现性的出现率为86%、单组的重现性为67%~100%、多组的重现性的出现率为100%,1组协同作用重现性67%;36组联合作用测试结果的再现性为50%~100%、再现性的出现率为86%,重现性为67%~100%、重现性的出现率为100%。上述分析可知,9种重金属的36种二元联合作用测试结果具有较好的多样性、再现性、重现性,表明测试条件、藻温测试方法、三指标评价法能够保证藻响应温差和藻响应药品评价结果的质量,参照浓度分析方法、联合作用评价方法能够控制联合作用分析结果的质量;藻响应的有毒有害物都存在敏感浓度,用参照浓度分析方法可分析出藻响应有毒有害物的参照浓度。因此,藻红外测试技术可以用于测试重金属、农药、有机药品、抗生素等的二元联合作用。