Landfill site selection using spatial information technologies and AHP: A case study in Beijing,China

Site selection is an important and necessary issue for waste management in fast-growing regions. Because of the complexity of waste management systems, the selection of the appropriate solid waste landfill site requires consideration of multiple alternative solutions and evaluation criteria. Based on actual conditions of the study area, we considered economic factors, calculated criteria weights using the analytical hierarchy process (AHP), and built a hierarchy model for solving the solid waste landfill site-selection problem in Beijing, China. A geographic information system (GIS) was used to manipulate and present spatial data. All maps are graded from 1 (lowest suitability) to 5 (highest suitability) using spatial information technologies. The candidate sites were determined by aggregation based on the criteria weights. The candidate sites are divided by ‘best’, ‘good’ and ‘unsuitable’ landfill areas. Best landfill areas represent optimal sites; good landfill areas can be used as back-up candidate sites. Our work offers a siting methodology and provides essential support for decision-makers in the assessment of waste management problems in Beijing and other rapidly developing cities in developing countries.     

Changes in negative air ions concentration under different light intensities and development of a model to relate light intensity to directional change

The purpose of this research was to determine changes in negative air ion (NAI) concentrations produced by plants grown under different light intensities. NAI concentrations were observed and analyzed in an outdoor green space with five plant species (Aloe arborescens, Clivia miniata, Chlorophytum comosum, Opuntia brunnescens, Crassula portulacea) and A. arborescens was then grown under controlled-light conditions in an enclosed space for the subsequent light intensity experiment.     

Study on the hydrolysis/precipitation behavior of Keggin Al13 and Al30 polymers in polyaluminum solutions

The hydrolysis/precipitation behaviors of Al³⁺, Al₁₃ and Al₃₀ under conditions typical for flocculation in water treatment were investigated by studying the particulates' size development, charge characteristics, chemical species and speciation transformation of coagulant hydrolysis precipitates. The optimal pH conditions for hydrolysis precipitates formation for AlCl₃, PAC_Al13 and PAC_Al30 were 6.5–7.5, 8.5–9.5, and 7.5–9.5, respectively. The precipitates' formation rate increased with the increase in dosage, and the relative rates were AlCl₃ ? PAC_Al30 > PAC_Al13. The precipitates' size increased when the dosage increased from 50 μM to 200 μM, but it decreased when the dosage increased to 800 μM. The Zeta potential of coagulant hydrolysis precipitates decreased with the increase in pH for the three coagulants. The iso-electric points of the freshly formed precipitates for AlCl₃, PAC_Al13 and PAC_Al30 were 7.3, 9.6 and 9.2, respectively. The Zeta potentials of AlCl₃ hydrolysis precipitates were lower than those of PAC_Al13 and PAC_Al30 when pH > 5.0. The Zeta potential of PAC_Al30 hydrolysis precipitates was higher than that of PAC_Al13 at the acidic side, but lower at the alkaline side. The dosage had no obvious effect on the Zeta potential of hydrolysis precipitates under fixed pH conditions. The increase in Zeta potential with the increase in dosage under uncontrolled pH conditions was due to the pH depression caused by coagulant addition. Al–Ferron research indicated that the hydrolysis precipitates of AlCl₃ were composed of amorphous Al(OH)₃ precipitates, but those of PAC_Al13 and PAC_Al30 were composed of aggregates of Al₁₃ and Al₃₀, respectively. Al³⁺ was the most un-stable species in coagulants, and its hydrolysis was remarkably influenced by solution pH. Al₁₃ and Al₃₀ species were very stable, and solution pH and aging had little effect on the chemical species of their hydrolysis products. The research method involving coagulant hydrolysis precipitates based on Al–Ferron reaction kinetics was studied in detail. The Al species classification based on complex reaction kinetic of hydrolysis precipitates and Ferron reagent was different from that measured in a conventional coagulant assay using the Al–Ferron method. The chemical composition of Al_a, Al_b and Al_c depended on coagulant and solution pH. The Al_b measured in the current case was different from Keggin Al₁₃, and the high Al_b content in the AlCl₃ hydrolysis precipitates could not used as testimony that most of the Al³⁺ was converted to highly charged Al₁₃ species during AlCl₃ coagulation.     

Evolution Rules of Urban-rural Development and Inspiration for China’s Agriculture

Based on urban-rural contrast coefficient,this article designs the agriculture relative development index(ARDI) as indicators measuring the intensity of urban-rural dual structure which is comparable among the countries of the world.This article calculates ARDI of 40 countries from 1980 to 2004.The result shows that ARDI in the developed countries and most of the middle-income countries are rising and yet there are declines in most of the low-income countries.The result also showed that most countries’ ARDI...     

不同形态有机物对自我造粒流化床中颗粒特性的影响

研究了溶解态、胶体态及颗粒态有机物对自我造粒流化床中颗粒特性的影响.研究表明,有机物的形态对颗粒粒径和有效密度有较大影响,即溶解态有机物形成的颗粒粒径最小,胶体态有机物形成的颗粒粒径次之,颗粒态有机物形成的颗粒粒径最大;有效密度规律则相反.此外,颗粒的平均粒径、平均有效密度沿床层高度的变化有不同分布,即自我造粒流化床底部形成的颗粒有效密度最大,但同种原水水质条件下颗粒粒径没有变化规律.     

CaO/SiO2对流化床焚烧飞灰熔融过程中重金属挥发的影响

对掺煤混烧的流化床焚烧飞灰熔融过程中重金属在气相(吸收率)中和固相(固定率)中的分布进行了研究,并采用HNO3-NaOH2级吸收方式对气相重金属进行了吸收.结果表明,CaO/SiO2(摩尔比)对重金属的迁移行为有重要影响,CaO/SiO2降低,Cd、Pb固定率总体呈上升趋势;2级吸收对气相重金属的吸收有限,大部分重金属主要溶解在HNO3吸收液中,但NaOH吸收液对Cr的吸收效果好于HNO3吸收液;氯对重金属的挥发有重要影响,当重金属以氯化物形式存在时,其挥发受到SiO2的限制.随着SiO2含量增加,挥发率降低.     

CAST工艺处理低C/N生活污水的强化脱氮性能

研究了不同运行条件对CAST工艺处理低C/N实际生活污水脱氮性能的影响,并对pH值和ORP的变化规律进行了分析。结果表明,传统4 h运行模式下,提高原水C/N比,TN去除效果并无显著提高;对于低C/N生活污水,降低充水比有利于提高出水TN去除率,然而,充水比降至16%时,系统因低负荷运行发生污泥膨胀。在不投加外碳源的情况下,采用分段进水交替A/O运行模式可大幅改善系统脱氮性能,且TN去除率随着交替次数的增多而提高,交替4次平均去除率达87.23%。系统采用实时控制方式运行时,可根据有机物降解、氨氧化及反硝化时pH值和ORP曲线上是否出现拐点,来判断反应系统的曝气以及搅拌时间是否过长、适当或不足。     

污泥膨胀状态下原生动物群落结构分析

系统研究了丝状菌膨胀与非丝状菌膨胀2种典型污泥状态下原生动物的群落结构特征及其演变规律。伴随丝状菌的大量增殖,原生动物总量相应减少,匍匐型纤毛虫及有壳类肉足虫数量迅速上升,占据明显的优势地位,典型原生动物为斜管虫（Chilodonella sp.）、小轮毛虫（Trochilia minuta）以及匣壳虫（Centropyxis sp.）;非丝状菌污泥膨胀对原生动物总量及种群结构影响较小,伴随粘性菌胶团的大量出现,各功能类群的比例变化较小,但原生动物总量持续增加,其中菌食性纤毛虫呈线性增加,典型原生动物为钟虫（Vorticella sp.）。     

几种试剂对硝酸根光催化脱色甲基橙的影响

以NO^-₃为光催化剂,在紫外灯照射下,对甲基橙溶液进行光催化脱色。结果表明,叔丁醇、甲醇和乙醇对催化脱色反应有抑制作用; KBr和Na₂SO₄对脱色反应均有促进作用;而且KBr的加入量存在最佳值; Na₂SO₄的促进作用随Na₂SO₄的量的增加逐渐增强。Na₂CO₃的存在对甲基橙的脱色反应没有影响。K₂S₃O₈和NO^-₃之间存在较强的协同作用;KIO₃和NO^-₃之间存在相加作用;KBrO₃和NO^-₃之间存在拮抗作用。     

浸提分离法提取皂素清洁工艺研究

提出一种通过溶剂提取将游离皂苷与淀粉、纤维等成分分离,从源头上减少用水量、耗酸量和污染物排放量的皂素清洁生产工艺。首先对溶剂提取条件进行优化,得出最佳工艺条件为：90%（体积比）乙醇溶液,料液比1∶7,沸腾回流提取3 h,重复提取3次。然后通过气质联用（GC/MS）分析了皂素废水的有机物组成。研究结果表明,清洁工艺皂素产率为1.51%（降低3.82%）,用酸量比传统工艺减少了71%,头道液COD浓度降低了46%,每100 g原料排放的COD总量下降了84%;皂素废水的有机物污染物主要为糠醛及其衍生物,清洁工艺废水的有机物含量更低,更易降解。