Particulate matter exchange between atmosphere and roads surfaces in urban areas

The deposition and the re-suspension of particulate matter (PM) in urban areas are the key processes that contribute not only to stormwater pollution, but also to air pollution. However, investigation of the deposition and the re-suspension of PM is challenging because of the difficulties in distinguishing between the resuspended and the deposited PM. This study created two Bayesian Networks (BN) models to explore the deposition and the re-suspension of PM as well as the important influential factors. The outcomes of BN modelling revealed that deposition and re-suspension of PM10 occurred under both, high-traffic and low-traffic conditions, and the re-suspension of PM2.5 occurred under low-traffic conditions. The deposition of PM10 under low-volume traffic condition is 1.6 times higher than under high-volume traffic condition, which is attributed to the decrease in PM10 caused by relatively higher turbulence under high-volume traffic conditions. PM10 is more easily resuspended from road surfaces compared to PM2.5 as the particles which larger than the thickness of the laminar airflow over the road surface are more easily removed from road surfaces. The increase in wind speed contributes to the increase in PM build-up by transporting particulates from roadside areas to the road surfaces and the airborne PM2.5 and PM10 increases with the increase in relative humidity. The study outcomes provide a step improvement in the understanding of the transfer processes of PM2.5 and PM10 between atmosphere and urban road surfaces, which in turn will contribute to the effective design of mitigation measures for urban stormwater and air pollution.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

不同制备温度下污泥生物炭对Cr(Ⅵ)的吸附特性

以城市剩余污泥为原料,于300,400,500,600 ℃温度条件下制备生物炭,通过单因素静态吸附实验探讨制备温度对生物炭吸附Cr（Ⅵ）的影响。结果表明:在500 ℃以内随着温度上升制备的生物炭对Cr（Ⅵ）的吸附量增加,制备温度高于500 ℃后变化不明显;扫描电镜（SEM）、比表面积（BET）、傅里叶红外光谱（FTIR）表征结果显示,热解温度对生物炭表面形貌和官能团组成有显著影响;等温模型及动力学拟合结果表明,生物炭吸附Cr（Ⅵ）为单分子层吸附、物理-化学复合吸附。热解温度对污泥制备生物炭吸附Cr（Ⅵ）的性能有显著影响,最佳制备温度为500 ℃,在此条件制备的生物炭对Cr（Ⅵ）的理论吸附量可达7.93 mg/g。     

应用改良型水质综合指数法评价饮用水水质

应用1套改良型水质综合指数法对3种不同类型的饮用水水质进行评价。将选取的26项检测指标按照卫生学意义分为5大类,并对各分类指标赋权。选用内梅罗法和最差因子判别法与五色等级分级法结合对2017年4—8月的3种类型饮用水进行水质评价。除7月和8月的管网水水质为2级（水质综合指数>0.5,蓝色）以外,其余月份的出水水质均达到1级（绿色）评价标准。不同类型饮用水中对水质综合指数影响最大的水质分类指标均是有机污染指标。2种不同类型的净水机出水水质均优于管网末梢水,但需注意个别指标的污染。     

医疗废物焚烧飞灰脱毒减害技术研究进展

医疗废物焚烧飞灰（MWIFA）富含高浓度的氯盐、碳组分、重金属和二噁英（PCDD/Fs）,已被列入我国《国家危险废物名录》,管理处置不当将对环境和人类健康造成严重危害。关于医疗废物焚烧飞灰处理处置的综合研究较少。介绍了医疗废物焚烧飞灰中重金属及二噁英等有毒有害物质的污染特征,分析了化学药剂稳定法、水泥固化技术、热处理技术、水热处理技术和浮选技术等多种飞灰处理技术的研究现状,重点阐述了上述后3种技术用于处理医疗废物焚烧飞灰中重金属和二噁英的研究进展及存在的问题,并对其应用前景进行了展望。     

北京市典型汽修企业VOCs排放特征与臭氧影响分析

对北京地区27家汽修企业进行调研,选取2家典型汽修企业进行气袋采样-GC-MS-FID采集及分析,定量分析其VOCs的排放特征,并计算其臭氧生成潜势（OFP）。结果表明:使用不同漆料的汽修企业排放特征不同,水性漆企业非甲烷总烃的排放浓度为0.62~36.49 mg/m3,油性漆企业的排放浓度为0~100.39 mg/m3;水性漆排放的VOCs以烷烃为主,占比高达57.16%,丙烷（39.65%）和甲苯（11.41%）是首要污染物;卤代烃（55.51%）是油性漆企业的主要VOCs排放物种,主要组分为1,2-二氯丙烷和1,2-二氯乙烷;水性漆企业的OFP值为144.78 mg/m3,油性漆企业的OFP值为664.43 mg/m3,大气反应活性最大的物种多为芳香烃,芳香烃对OFP的贡献率分别为52.18%和88.44%。     

土壤微生物群落结构对生活源和工业源再生水灌溉的差异化响应

为研究不同来源再生水灌溉对土壤微生物群落结构的影响,以地下水灌溉土壤为对照,采用Illumina MiSeq高通量测序技术对长期利用生活源和工业源再生水灌溉的土壤微生物群落结构进行分析,进一步探究土壤环境因子及其相互作用对微生物群落结构的影响.结果表明,与地下水灌溉相比,长期生活源再生水灌溉可显著提高土壤中TOC、 DOC、 Eh、 NH~+_4-N和TP的含量,长期工业源再生水灌溉导致Cd、 Cr、 Cu、 Pb和Zn在表层土壤大量累积.再生水灌溉显著增加了土壤中Acidobacteria和Planctomycetes的相对丰度,降低了Firmicutes和Tectomicrobia的相对丰度,且不同来源再生水对土壤中功能微生物的影响不同,生活源再生水灌溉可显著增加Chloroflexi和Nitrospirae的相对丰度,而工业源再生水灌溉对Actinobacteria具有显著的抑制作用.db-RDA分析结果表明,生活源再生水灌溉土壤菌群主要受TN、 TP、 DOC和Eh影响(P0.05),工业源再生水灌溉土壤菌群主要受重金属影响(P0.05).长期再生水灌溉可改变土壤环境因子间的相互作用,进而影响微生物群落结构,生活源再生水灌溉土壤中微生物主要受DOC、 TN和TP等营养物质含量的增加和氧化还原条件的改变控制,工业源再生水灌溉土壤中微生物与重金属的积累显著相关.     

UASB启动运行特征及互营丙酸氧化菌定量分析

为揭示升流式厌氧污泥床（UASB）反应器启动运行效能与互营丙酸降解菌群数量之间的关系,以稀释的玉米淀粉生产废水为底物,考察了UASB启动期的运行特征,并采用实时荧光定量PCR技术（qPCR）分析了互营丙酸降解菌群（丙酸氧化菌和产甲烷菌）的演替规律.结果表明,在进水COD 2000mg/L和水力停留时间（HRT）24h条件下,经过38d的连续运行,COD去除率达到了91.9%.当HRT分阶段缩短至8h时,比产甲烷速率达到了315LCH₄/（kg COD·d）,且形成了沉降性能良好的颗粒污泥.qPCR检测结果表明,至少有5种已鉴定的丙酸氧化菌存在于UASB反应器中.Pelotomaculum propionicum为接种污泥中的主要丙酸氧化菌,约占检测到丙酸氧化菌总数的45.7%.它的数量随着HRT缩短不断减少.而Syntrophobacter sulfatireducens和S.wolinii的数量随着HRT缩短不断增加,并在启动完成时达到最大值,分别为1.3×10³,5.5×10³个16S rRNA基因拷贝数/ng DNA,演替成为成熟颗粒污泥中的优势丙酸氧化菌群.Methanobacterium和Methanosarcina为接种污泥中的主要氢营养型产甲烷菌和乙酸营养型产甲烷菌,其数量随着HRT的缩短而逐渐减少,而Methanospirillum和Methanosaeta的数量随HRT的缩短逐渐增加,成为成熟颗粒污泥中的优势产甲烷菌群.     

重金属离子对肺表面活性物质单层膜的影响

为了探究重金属对肺表面活性物质（PS）膜的影响,利用Langmuir–Wilhelmy膜天平,研究了不同种类和浓度的重金属离子与PS单层膜的相互作用.发现Cr³⁺、Cu²⁺、Hg²⁺、Pb²⁺、Cd²⁺、Ni²⁺6种重金属离子均使PS单层的π-A等温线G-LE相变阶段外扩,而Fe³⁺可诱导单层缩合.随后,选取Cd²⁺,Cu²⁺,Hg²⁺,Fe³⁺4种离子进一步探究了重金属浓度对PS单层膜表面活性的影响规律,进行了可压缩模量分析,并结合红外光谱（FTIR）和原子力显微镜（AFM）探究其作用机理,发现Cu²⁺,Fe³⁺和Hg²⁺均会以浓度依赖的方式与PS单层的极性头部发生络合作用,形成复合物,改变膜的稳定性;而Cd²⁺的影响明显弱于其他3种金属离子,但也能使得PS单层有序性增强.     

烟花爆竹燃放对大气污染物及PM2.5组分影响

为了解烟花爆竹燃放对保定市大气污染物和PM_2.5中水溶性离子及有机碳（OC）、元素碳（EC）浓度的影响,对保定市春节期间大气污染物和颗粒物组分的浓度特征进行了分析,并评估了烟花爆竹的贡献.结果表明： 2019年春节期间烟花爆竹集中燃放期PM_2.5、PM₁₀、SO₂、NO₂、CO平均浓度比非集中燃放期分别增加了1.3、1.0、1.1、0.4、0.02倍;保定市春节期间禁燃措施施行后,除夕、初一2d污染物平均浓度、最高浓度和高浓度持续时间均明显下降,集中燃放期烟花爆竹燃放对PM_2.5、PM₁₀和SO₂浓度贡献量从50%左右（2018年、2017年）下降至30%左右（2019年）,其中SO₂贡献量下降幅度超过PM_2.5和PM₁₀;组分分析表明,接待中心站点（主城区）、涿州站点（区县建成区）烟花爆竹燃放期K⁺、Mg²⁺、Cl^-浓度在水溶性离子中的总占比分别为39.3%、51.1%,比非燃放期的占比显著上升;烟花爆竹燃放对PM_2.5中K⁺、Mg²⁺、Cl^-浓度贡献率在50%以上,其中对K⁺贡献占比高达89.0%,涿州站点SO₄^2-、K⁺、Mg²⁺、Cl^-的贡献量分别是接待中心站点的2.2、2.1、1.9、1.8倍,燃放期硫氧化率（SOR）、氮氧化率（NOR）相比于非燃放期均有一定程度的升高;集中燃放期OC、EC浓度较非集中燃放期分别升高了2.5、2.1倍,烟花爆竹燃放对OC影响大于EC.