饮用水生物处理中微生物量和活性的测定方法

微生物量和微生物活性是饮用水生物处理工艺设计与运行的重要参数。总结论述了适用于表示饮用水生物处理过程生物膜中微生物数量和活性的几种主要指标的测定方法。     

公路地表灰尘及径流中颗粒物附着重金属对比研究

对北京城区北三环上北太平桥以西约300 m处路段地表灰尘及径流中不同粒径颗粒物附着重金属载荷进行对比研究.结果表明:(1)随着颗粒物粒径的增大,地表灰尘中颗粒物附着重金属浓度总体上逐渐降低;地表灰尘中<40.00 μm颗粒物附着重金属浓度最高;重金属载荷分布集中度不强,但主要集中在地表灰尘中<300.00 μm的颗粒物L.(2)地表径流中大部分重金属附着在<125.00 μm颗粒物上;0.45～10.00 μm颗粒物附着重金属载荷最高;0.45～40.00 μm颗粒物附着重金属载荷平均为77.1%.(3)地表灰尘中<40.00 μm的颗粒物的潜在水环境风险不太突出,但是其实际水环境影响却起主导作用.(4)进入水体的小粒径颗粒物质量分数升高是地表灰尘和径流重金届载荷随颗粒物粒径分布不同的重要原因之一;大气湿沉降对小粒径颗粒物重金属载荷可能会有一定的影响.     

Ag~+改性复合钛铌酸钾盐对二甲基硫醚和乙硫醇吸附与光催化氧化研究

采用高温固相法合成具有不同Nb/Ti摩尔比的复合钛铌酸钾盐,通过Ag+离子交换对其进行改性。在静态下评价了Ag+改性复合钛铌酸钾盐对二甲基硫醚(DMS)和乙硫醇(EM)的吸附与紫外光催化氧化作用,使用红外光谱技术对催化剂表面滞留物种进行表征。结果表明,Ag+改性复合钛铌酸钾盐对DMS的吸附作用力比EM弱。随着Nb/Ti摩尔比增加,Ag+改性复合钛铌酸钾盐对EM的吸附作用力增强。在紫外光辐射下,Ag+改性的复合钛铌酸钾盐将DMS氧化为亚砜、砜和硫酸盐,而EM则被氧化为磺酸和单齿硫酸盐。     

竹炭-微生物联合法对沼液中氨氮的去除

采用竹炭-微生物联合法,考察了竹炭用量、菌液用量、进水氨氮浓度、pH、DO、HRT等因素对氨氮废水处理效果的影响;同时采用对比实验,初步探讨了竹炭-微生物联合法处理沼液的作用机理。结果表明,竹炭-微生物法去除沼液氨氮的最优条件推荐为:竹炭用量30 g/L,微生物活性液用量3%,pH 7.0～8.0,DO为2 mg/L,HRT为48 h。竹炭-微生物法对沼液氨氮的去除过程可用一级反应动力学模型C=272.56e-0.0148描述,其去除效果来源于竹炭吸附和生物降解的协同作用,协同程度为48.45%。     

不同曝气方式下SBR亚硝化的实现及NO2--N积累效果

研究不同曝气方式下亚硝化的实现以及基质浓度、曝气频率和温度对NO-2-N积累效果的影响。以实际污泥脱水液为研究对象,控制进水NH+4-N浓度在50~80 mg/L范围内,温度为27℃,pH值为7.8~8.2,DO浓度为0.5~1.0mg/L,分别采用连续曝气和间歇曝气2种方式启动SBR亚硝化反应器,并考察了在不同基质浓度、曝气频率和温度条件下NO-2-N累积情况。实验研究结果表明,经过40 d左右的运行,在2种不同曝气方式下SBR均成功实现了亚硝化,稳定运行阶段,NO-2-N积累率分别达到95%和85%。经SEM扫描电镜观察发现,在驯化成熟的活性污泥中,亚硝化细菌多呈球状和杆状,大小不同,外形饱满。当进水氨氮浓度小于200 mg/L,曝气频率为曝气15 min/停曝15 min,温度为27℃时,NO-2-N积累效果最佳,平均积累率可达90%以上。间歇曝气可以有效促进亚硝化细菌富集,有利于实现较高浓度的NO-2-N积累。基质浓度、曝气频率和温度对NO-2-N积累效果的影响显著。     

Estimation and characterization of unintentionally produced persistent organic pollutant emission from converter steelmaking processes

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm^?3 in the stack gas and 5.59–87.6 pg WHO-TEQ g^?1 in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm^?3 in the stack gas and 0.03–0.08 pg TEQ g^?1 in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76_, and 229–759 μg t^?1, respectively.     

Comparative quantification of oxygen release by wetland plants: electrode technique and oxygen consumption model

Understanding oxygen release by plants is important to the design of constructed wetlands for wastewater treatment. Lab-scale systems planted with Phragmites australis were studied to evaluate the amount of oxygen release by plants using electrode techniques and oxygen consumption model. Oxygen release rate (0.14 g O₂/m²/day) measured using electrode techniques was much lower than that (3.94–25.20 gO₂/m²/day) calculated using the oxygen consumption model. The results revealed that oxygen release by plants was significantly influenced by the oxygen demand for the degradation of pollutants, and the oxygen release rate increased with the rising of the concentration of degradable materials in the solution. The summary of the methods in qualifying oxygen release by wetland plants demonstrated that variations existed among different measuring methods and even in the same measuring approach. The results would be helpful for understanding the contribution of plants in constructed wetlands toward actual wastewater treatment.     

Geochemical processes of mercury in Wujiangdu and Dongfeng reservoirs, Guizhou, China

The geochemical processes of mercury in Dongfeng (DF) and Wujiangdu (WJD) reservoirs, which were constructed in 1992 and 1979, respectively in Wujiang River, which is the upper branch of Yangtze River were investigated. One sampling site was chosen upriver of 1 km from the dam for each reservoir. Three sampling campaigns were conducted at these sampling sites in December 2003, April 2004 and July 2004, respectively. The distributions of different mercury species in the water column, sediment, and sediment pore water were studied. We found that the sediment is the net source of both inorganic and MeHg to the water column for both reservoirs. The MeHg diffusion fluxes in WJD reservoir at all sampling campaigns were significantly higher than those in DF reservoir. Our study demonstrated that the high primary productivity in the reservoir produced elevated organic matter content that would favor the methylmercury production in sediment.     

表面活性剂加强动电技术去除污泥中铜和镉

以实际城市污泥为研究对象,通过采用表面活性剂作为阴极液,并考虑阴极液pH值、表面活性剂类型和电压3种因素对动电技术去除污泥中重金属(铜和镉)的影响,选用正交试验确定最佳试验条件.结果表明,采用表明活性剂作为阴极液加强动电技术去除污泥中重金属足可行的,铜和镉的去除率分别达到11.1%～52.6%和9.1%～46.7%.通过对正交试验结果进行极差和方差分析,试验的最佳条件为:电压为20 V,阴极液加入十六烷基三甲基氯化铵并控制pH值为4～6.表面活性剂的类型对动电技术去除镉具有显著影响.其中,表面活性剂类型对动电过程的影响最大,阴极液pH值次之,电压影响最小.     

海河干流、大沽排污河沉积物中有机氯农药的残留状况

调查了海河干流和大沽排污河沉积物中持久性有机氯杀虫剂(OCPs)的残留状况.在所选取的16个断面沉积物样品中均有大量HCHs、DDTs检出,表明海河和大沽排污河的DDT和HCH污染相当严重.海河沉积物中HCHs和DDTs总质量浓度分别为3.30～75.96、1.57～221.57 ng/g.大沽排污河沉积物中HCHs和DDTs的残留量分别为2.30～124.61、11.28～237.30ng/g.与国内外部分河流表层沉积物中HCHs、DDTs的含量相比,海河和大沽排污河沉积物中有机氯农药含量较高.最后根据两条河流沉积物中的OCPs的残留量,分析了其可能的污染源.