Risk assessment of heavy metals in road and soil dusts within PM2.5, PM10 and PM100 fractions in Dongying city, Shandong Province, China

15 road and 14 soil dust samples were collected from an oilfield city, Dongying, from 11/2009-4/2010 and analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) for V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb within PM(2.5), PM(10) and PM(100) fractions synchronously. Metal concentrations, sources and human health risk were studied. Results showed that both soil and road dust exhibited higher values for Mn and Zn and lower values for Co and Cd for the three fractions. Mass concentration ratios of PM(2.5)/PM(10) and PM(10)/PM(100) for metals in road and soil dust indicate that most of the heavy metals tend to concentrate in fine particles. Geoaccumulation index and enrichment factors analysis showed that Cu, Zn and Cd exhibited moderate or heavy contamination and significant enrichment, indicating the influence of anthropogenic sources. Vanadium, Cr, Mn and Co were mostly not enriched and were mainly influenced by crustal sources. For Ni, As and Pb, they ranged from not enriched to moderately enriched and were influenced by both crustal materials and anthropogenic sources. The conclusions were confirmed by multivariate analysis methods. Principle component analysis revealed that the major sources were vehicle emission, industrial activities, coal combustion, agricultural activities and crustal materials. The risk assessment results indicated that metal ingestion appeared to be the main exposure route followed by dermal contact. The most likely cause for cancer and other health risks are both the fine particles of soil and road dusts.     

Production of Curdlan Grown on Cassava Starch Waste Hydrolysates

Cassava starch waste hydrolysates (CSWHs) with different degrees of polymerisation, i.e., CSWHs-1, CSWHs-2 and CSWHs-3, were prepared through the hydrolysis of cassava starch waste with thermostable a-amylase from Thermococcus sp. HJ21. The prepared CSWHs were then used as a carbon source for curdlan production with Alcaligenes faecalis ATCC 31749. The amount of curdlan produced and the glucosyltransferase activity during curdlan synthesis increased more obviously when CSWHs-2 was used as the carbon source than when glucose was used. Using both carbon sources, the maximum curdlan production was observed at day 5, and the maximum glucosyltransferase activity was observed at day 4. Glucosyltransferase activity decreased thereafter, and biomass continued to increase until the end of the experiment (day 6). Results indicated that the enhanced curdlan production with CSWHs as the carbon source was highly correlated with glucosyltransferase activity.     

Robust Regression with Data-Dependent Regularization Parameters and Autoregressive Temporal Correlations

We introduce robust procedures for analyzing water quality data collected over time. One challenging task in analyzing such data is how to achieve robustness in presence of outliers while maintaining high estimation efficiency so that we can draw valid conclusions and provide useful advices in water management. The robust approach requires specification of a loss function such as the Huber, Tukey’s bisquare and the exponential loss function, and an associated tuning parameter determining the extent of robustness needed. High robustness is at the cost of efficiency loss in parameter loss. To this end, we propose a data-driven method which leads to more efficient parameter estimation. This data-dependent approach allows us to choose a regularization (tuning) parameter that depends on the proportion of “outliers” in the data so that estimation efficiency is maximized. We illustrate the proposed methods using a study on ammonium nitrogen concentrations from two sites in the Huaihe River in China, where the interest is in quantifying the trend in the most recent years while accounting for possible temporal correlations and “irregular” observations in earlier years.     

Nutrients Availability Shapes Fungal Community Composition and Diversity in the Rare Earth Mine Tailings of Southern Jiangxi,China

Russian Journal of Ecology - The present study characterized the nutrients availability of three rare earth tailings deserted in different time stages in Southern Jiangxi of China, and revealed the...     

钙钛矿型催化剂催化湿式氧化处理煤气化废水纳滤浓缩液

采用溶胶-凝胶法制备了Mn掺杂钙钛矿型催化剂LaFexMn1-xO3,并以其为催化剂催化湿式双氧水氧化处理煤气化废水纳滤浓缩液。采用XRD,SEM,FTIR技术对催化剂进行了表征。表征结果显示：制备的催化剂均具有标准的钙钛矿型结构,其中,LaFe0.9Mn0.1O3的结构稳定,比表面积大。实验结果表明：制备的催化剂中LaFe0.9Mn0.1O3的催化活性最高,且稳定性好,连续使用5次后催化活性未见明显减弱;在H2O2投加量3.0 g/L、n（H2O2）∶n（LaFe0.9Mn0.1O3）=12∶1、反应温度160 ℃、反应压力1 MPa、浓缩液pH 3、反应时间60 min的最优条件下,COD、UV254和TOC的去除率分别达到80.9%、95.2%和68.0%,BOD5/COD由0.02提升至0.40,可生化性大幅提高。     

Spatial simulation and LCA evaluation on the plastic waste recycling system in Tianjin

With the rapid economic development in China, the amount of plastic waste (PW) generated has greatly increased and much of the waste is currently not treated. To reduce greenhouse gas (GHG) emissions from recycling of PW, we estimated the PW flow and considered methods to improve the household PW recycling system in Tianjin by adjusting processes during transportation and establishing a PW recycling factory in Zi’ya Industrial Park. The goal of the study was to identify reasonable improvements for the recycling system and clarify the environmental load. Geographic information system (GIS) technology was used to simulate transport processes for comparing GHG emissions from the transport processes between the present case and an improved case. Life cycle assessment (LCA) was used to compare GHG emissions between a projected scenario and a baseline scenario. Estimated GHG emissions during transport processes in the improved case were reduced by about 12,197 t CO₂ eq per year compared to the present case, equivalent to about 65.9 % of the total emissions in the present case. GHG emissions in the projected scenario were about 101,738 t CO₂ eq less per year than the baseline scenario, equivalent to about 75.5 % of the total emissions in the baseline scenario.     

多溴联苯醚暴露的神经行为效应及其毒理机制

溴代阻燃剂多溴联苯醚(PBDEs)是一类在各类环境介质、生物体和人体中均能检出的普遍存在的环境污染物。我国的主要污染源之一集中于东南部地区的电子废弃物回收场地。由于PBDEs具有结构稳定性、亲脂性和生物累积性,电子废弃物拆解回收活动对当地生态系统和居民健康存在着巨大的潜在风险。PBDEs的发育神经毒性受到研究者的极大关注,但其神经行为毒性效应和机制仍需深入研究。行为学效应既是内在神经毒性机制的外在反映,也是推测环境污染物在高级别生物学水平(如种群、群落)影响的最有力试验手段。近年来,基于视频追踪系统技术的商业行为学分析设备迅速发展,使行为学效应测试在环境毒理学领域具备极大的潜力。本文结合近年来国内外环境毒理学研究进展,回顾了PBDEs的神经行为毒性效应,包括运动行为、掠食行为和认知行为,并分析了其可能的毒理机制,最后总结了当前研究存在的问题和未来研究需要关注的重点方向。     

黄、渤海滨海带大气颗粒物时空分布与来源特征

PM10作为大气污染物监测的主要指标之一,探究大气PM10浓度对大气环境质量和人体健康评价具有重要意义。黄、渤海滨海带包括京、津和辽、冀、鲁、苏等工、农业大省,区域大气PM10污染的时空分布和来源特征具有复杂性和典型性。在锦州、北京、天津、烟台、青岛、连云港和盐城7个城市布设10个采样点,含7个城市点和3个农村点,开展为期一年的大气颗粒物的采样;同时,于冬季1月和夏季7月在锦州、天津和烟台进行合计60 d的加密采样,藉以确定研究区域大气PM10的时空分布和来源特征。结果表明,黄、渤海滨海带大气年均PM10总浓度为(129’18)"g·m~(-3),单月最低值出现在2015年7月盐城农村样点15"g·m~(-3),最高值为2015年3月北京城市点307"g·m~(-3)。盐城大气PM10浓度(城市点(85’27)"g·m~(-3)和农村点(66’35)"g·m~(-3))显著低于其他样点大气PM10浓度。渤海滨海带中西部的京(140’68"g·m~(-3))、津(169’60"g·m~(-3))两市大气PM10年均浓度显著高于东部的锦州(125’41"g·m~(-3))和烟台(109’31"g·m~(-3));而且黄海滨海带大气PM10年均浓度(114"g·m~(-3))显著低于渤海滨海带年均浓度(136"g·m~(-3)),总体上表现出西高东低、北高南低的特征。黄、渤海滨海带城市点和农村点年均浓度分别为(129’18)"g·m~(-3)和(112’30)"g·m~(-3);农村点春冬季大气PM10浓度和城市点浓度相当,无显著差异,夏秋季大气PM10浓度略低于城市浓度,表明农村地区大气颗粒物污染情况也较为严重,需受到关注。区域内PM10浓度季节变化整体表现为春冬高、夏秋低。利用多元回归分析初步判断黄、渤海滨海带PM10属于复合来源,大气PM10浓度约30%的变化与降水、人均能耗和沙尘天气相关。黄、渤海滨海带大气PM10浓度的昼夜变化不大,大气PM10浓度与气温呈现正相关,与风速和降水呈现负相关,表现为受各种气象因素综合作用的影响。     

3种典型微生物农药对家蚕的毒性研究

苏云金芽孢杆菌、球孢白僵菌以及棉铃虫核型多角体病毒是细菌类、真菌类和病毒类微生物农药的典型代表。为了明确微生物农药对家蚕的毒性影响,选取以上3种典型微生物农药,分别探究其对家蚕的毒性。结果显示:苏云金杆菌原药对家蚕LC50值为1.33×105CFU·m L-1;球孢白僵菌原药对家蚕LC50值为1.14×106CFU·m L-1;棉铃虫核型多角体病毒母药对家蚕LC50值大于1.00×108PIB·m L-1。与此同时,通过进一步试验,明确了以上3种微生物农药对家蚕结茧率、死笼率、全茧量、茧层量等关键指标的影响。结果显示:除了棉铃虫核型多角体病毒母药,高浓度苏云金杆菌原药、球孢白僵菌原药对家蚕的结茧率和死笼率均具有显著影响;3种微生物农药对家蚕产茧能力指标全茧量、茧层量以及蛹重均无显著性影响。     

利用重组大肠杆菌SOS法评价污水厂出水的遗传毒性以及工艺去除效果

SOS/umu测试法被广泛应用于化合物和复杂混合物遗传毒性的评价,由于该技术所用菌种为致病菌且操作步骤繁琐等原因,制约了技术的推广应用。研究建立了基于重组大肠杆菌SOS效应的水质遗传毒性检测方法(专利号:ZL201110022476.1),应用该方法评价了某市4座污水厂出水的直接遗传毒性效应,同时以污水处理一厂为例考察了直接遗传毒性效应的季节变化规律以及不同的工艺对水中直接遗传毒性物质的去除情况。结果显示:各污水厂出水均表现出一定的直接遗传毒性,对应的4-NQO毒性当量浓度范围为0.018~0.514 mg·L-1;一年四季中夏季进出水直接遗传毒性效应最高,现有工艺中生化处理工艺段对直接遗传毒性去除效果最佳,去除率为33.33%。该方法操作便利、检测敏感性较高、操作危险性较低,可用于水中直接遗传毒性效应的测试。