絮团形态的动态演变

实验考察了絮凝过程中广义絮团（包括单体颗粒、线状絮团、面状絮团及体状絮团）的黏性分维数、特征黏度、絮团的黏性组成等随絮凝时间的动态演变。结果表明,在絮凝过程中,单体颗粒的黏性分维数与其拓扑维数一致,其余各类絮团的黏性分维数均小于其对应的拓扑维数,其中线状絮团的分维数基本不受絮凝时间的影响,但面状絮团及体状絮团的分维数随絮凝过程的进行逐渐增大但最终趋于稳定;所有絮团的特征黏度与絮凝时间无关,其中线状、面状及体状絮团的特征黏度依次具有103、104和105的数量级;各类絮团的黏性组成随絮凝过程的进行表现出不同的变化态势。     

废弃铬盐厂土壤中铬的赋存特征及异位淋洗修复可行性研究

土壤理化性质、污染物的分布及赋存特征是土壤异位淋洗技术是否可行的关键依据。以西北某废弃铬盐厂铬污染场地土壤作为研究对象,测定了土壤基本理化参数及各粒径污染物的浓度,探究总铬和六价铬在不同粒径土壤中的分布特征,并通过铬的赋存形态分析确定清水作为淋洗剂,开展异位清水淋洗实验。结果表明：供试土壤粗颗粒物料（粒径分别为：>9.50 mm、2.00~9.50 mm、0.841~2.00 mm及0.25~0.841 mm）占土壤总质量的比例达到93.36%,总铬和六价铬污染物富集于土壤细颗粒（粒径-1,达到修复标准要求。     

我国村镇生活污水处理技术发展方向展望

随着我国村镇生活污水处理技术的快速发展,众多技术被研发和应用在村镇污水处理领域。但村镇污水处理技术在实际应用过程中仍然存在着多种问题,如过度参考城镇经验、技术选择缺乏标准指导和规范、技术装备缺乏标准化等。基于我国村镇污水处理常用技术的主要优缺点分析,梳理了我国村镇污水处理技术的应用现状,并对我国村镇污水处理技术的发展方向进行了展望。目前,我国村镇污水处理技术在适应性、标准化、规范化等方面仍然存在很多问题。未来,村镇污水处理技术需要在标准化、低耗高效、自动化和智能化等方面进行突破,应强化技术设备的适应性。     

小槽式集热系统热性能测试和理论研究

为拓宽太阳能应用领域,基于新研发的小型槽式太阳能聚光集热器,定义当量采光面积参数概念,建立吸热和散热数学模型。以广州地区为例,给出东西向放置的槽式聚光集热器在典型日期跟踪状态下太阳光入射角和直射光利用率的变化规律。通过散热数学模型计算,分析系统各项热损失的变化规律,提出改善系统热性能的有效解决方案并通过测试进行验证。实验测试表明,所开发小槽式聚光集热器在中温段有高热效率,在工质150℃时系统热效率在50%左右。     

Drought-tolerant <Emphasis Type="Italic">Streptomyces pactum</Emphasis> Act12 assist phytoremediation of cadmium-contaminated soil by <Emphasis Type="Italic">Amaranthus hypochondriacus</Emphasis>: great potential application in arid/semi-arid areas

Microbe-assisted phytoremediation provides an effective approach to clean up heavy metal-contaminated soils. However, severe drought may affect the function of microbes in arid/semi-arid areas. Streptomyces pactum Act12 is a drought-tolerant soil actinomycete strain isolated from an extreme environment on the Qinghai-Tibet Plateau, China. In this study, pot experiments were conducted to assess the effect of Act12 on Cd tolerance, uptake, and accumulation in amaranth (Amaranthus hypochondriacus) under water deficit. Inoculated plants had higher Cd concentrations (root 8.7–33.9 %; shoot 53.2–102.1 %) and uptake (root 19.9–95.3 %; shoot 110.6–170.1 %) than non-inoculated controls in Cd-treated soil. The translocation factor of Cd from roots to shoots was increased by 14.2–75 % in inoculated plants, while the bioconcentration factor of Cd in roots and shoots was increased by 10.2–64.4 and 53.9–114.8 %, respectively. Moreover, inoculation with Act12 increased plant height, root length, and shoot biomass of amaranth in Cd-treated soil compared to non-inoculated controls. Physiochemical analysis revealed that Act12 enhanced Cd tolerance in the plants by increasing glutathione, elevating superoxide dismutase and catalase activities, as well as reducing malondialdehyde content in the leaves. The drought-tolerant actinomycete strain Act12 can enhance the phytoremediation efficiency of amaranth for Cd-contaminated soils under water deficit, exhibiting potential for application in arid and semi-arid areas.     

Simultaneous determination of estrogenic odorant alkylphenols,chlorophenols, and their derivatives in water using online headspace solid phase microextraction coupled with gas chromatography-mass spectrometry

A simple online headspace solid-phase microextraction (HS-SPME) coupled with the gas chromatography-mass spectrometry (GC-MS) method was developed for simultaneous determination of trace amounts of nine estrogenic odorant alkylphenols and chlorophenols and their derivatives in water samples. The extraction conditions of HS-SPME were optimized including fiber selection, extraction temperature, extraction time, and salt concentration. Results showed that divinylbenzene/Carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber was the most appropriate one among the three selected commercial fibers, and the optimal extraction temperature, time, and salt concentration were 70 °C, 30 min, and 0.25 g/mL, respectively. The developed method was validated and showed good linearity (R ²?>?0.989), low limit of detection (LOD, 0.002–0.5 μg/L), and excellent recoveries (76–126 %) with low relative standard deviation (RSD, 0.7–12.9 %). The developed method was finally applied to two surface water samples and some of these target compounds were detected. All these detected compounds were below their odor thresholds, except for 2,4,6-TCAS and 2,4,6-TBAS wherein their concentrations were near their odor thresholds. However, in the two surface water samples, these detected compounds contributed to a certain amount of estrogenicity, which seemed to suggest that more attention should be paid to the issue of estrogenicity rather than to the odor problem.     

强化除磷型A/O-MBR工艺运行稳定性

采用缺氧/好氧膜生物反应器(A/O-MBR)处理合成的生活污水,考察了投加不同浓度的聚合氯化铝(PAC)对该工艺在除磷效能及运行稳定性方面的影响。结果表明,投加PAC可以有效降低出水TP的浓度;在投加量为150 mg/L时,TP的去除率达到最优,为90.1%,出水浓度维持0.48 mg/L左右,达到《城镇污水处理厂污染物排放标准》(GB18918-2002)的一级A标准。投加一定量的PAC可以有效提高微生物的活性;此外,可以降低污泥絮体的Zeta电位,增大污泥絮体的粒径,降低胞外聚合物(EPS)中多糖的浓度,进而有效延缓膜污染的速率。     

催化强化臭氧氧化处理化工园区生化尾水

以陶粒为载体,以TiO2,Fe2O3,MnO2为活性组分,考察不同活性组分的陶粒作为催化剂对化工园区生化尾水臭氧氧化能力的强化情况。结果表明,3种负载型催化剂均能有效强化臭氧氧化过程,显著降低生化尾水Abs、UV254以及COD等指标,其中以Fe2O3/陶粒的催化强化效果最为显著,能显著降低生化尾水在200~250 nm处的吸波强度,尾水UV254从0.580降至0.320,COD从240 mg/L降至194 mg/L。     

PVC/PES-g-PEGMA共混膜的制备及其耐污染性能

首先将聚乙二醇单甲基甲醚酯(PEGMA)接枝到聚醚砜(PES)上得到PES-g-PEGMA,然后利用溶液共混的方法,将聚氯乙烯(PVC)与PES-g-PEGMA共混,通过溶剂-非溶剂扩散诱导相分离法(NIPS)制备PVC/PES-g-PEGMA共混膜。在此基础上对PVC/PES-g-PEGMA共混膜的断面和表面微观结构、水通量、 截留率、机械性能及耐污染等性能进行测试,并采用接触角,含水率(EWC),X 射线光电子能谱仪(XPS) 来表征PES-g-PEGMA 的质量百分含量对 PVC/PES-g-PEGMA 共混膜亲水性的影响。结果表明,PVC/PES-g-PEGMA共混膜水通量,亲水性较纯PVC有很大程度的提高。耐污染性实验表明,随着PES-g-PEGMA的增加,耐污染性逐渐增强。实验结果同时也表明,该共混体系最佳共混比为7:3。