Landfill site selection using spatial information technologies and AHP: A case study in Beijing,China

Site selection is an important and necessary issue for waste management in fast-growing regions. Because of the complexity of waste management systems, the selection of the appropriate solid waste landfill site requires consideration of multiple alternative solutions and evaluation criteria. Based on actual conditions of the study area, we considered economic factors, calculated criteria weights using the analytical hierarchy process (AHP), and built a hierarchy model for solving the solid waste landfill site-selection problem in Beijing, China. A geographic information system (GIS) was used to manipulate and present spatial data. All maps are graded from 1 (lowest suitability) to 5 (highest suitability) using spatial information technologies. The candidate sites were determined by aggregation based on the criteria weights. The candidate sites are divided by ‘best’, ‘good’ and ‘unsuitable’ landfill areas. Best landfill areas represent optimal sites; good landfill areas can be used as back-up candidate sites. Our work offers a siting methodology and provides essential support for decision-makers in the assessment of waste management problems in Beijing and other rapidly developing cities in developing countries.     

Study on the hydrolysis/precipitation behavior of Keggin Al13 and Al30 polymers in polyaluminum solutions

The hydrolysis/precipitation behaviors of Al³⁺, Al₁₃ and Al₃₀ under conditions typical for flocculation in water treatment were investigated by studying the particulates' size development, charge characteristics, chemical species and speciation transformation of coagulant hydrolysis precipitates. The optimal pH conditions for hydrolysis precipitates formation for AlCl₃, PAC_Al13 and PAC_Al30 were 6.5–7.5, 8.5–9.5, and 7.5–9.5, respectively. The precipitates' formation rate increased with the increase in dosage, and the relative rates were AlCl₃ ? PAC_Al30 > PAC_Al13. The precipitates' size increased when the dosage increased from 50 μM to 200 μM, but it decreased when the dosage increased to 800 μM. The Zeta potential of coagulant hydrolysis precipitates decreased with the increase in pH for the three coagulants. The iso-electric points of the freshly formed precipitates for AlCl₃, PAC_Al13 and PAC_Al30 were 7.3, 9.6 and 9.2, respectively. The Zeta potentials of AlCl₃ hydrolysis precipitates were lower than those of PAC_Al13 and PAC_Al30 when pH > 5.0. The Zeta potential of PAC_Al30 hydrolysis precipitates was higher than that of PAC_Al13 at the acidic side, but lower at the alkaline side. The dosage had no obvious effect on the Zeta potential of hydrolysis precipitates under fixed pH conditions. The increase in Zeta potential with the increase in dosage under uncontrolled pH conditions was due to the pH depression caused by coagulant addition. Al–Ferron research indicated that the hydrolysis precipitates of AlCl₃ were composed of amorphous Al(OH)₃ precipitates, but those of PAC_Al13 and PAC_Al30 were composed of aggregates of Al₁₃ and Al₃₀, respectively. Al³⁺ was the most un-stable species in coagulants, and its hydrolysis was remarkably influenced by solution pH. Al₁₃ and Al₃₀ species were very stable, and solution pH and aging had little effect on the chemical species of their hydrolysis products. The research method involving coagulant hydrolysis precipitates based on Al–Ferron reaction kinetics was studied in detail. The Al species classification based on complex reaction kinetic of hydrolysis precipitates and Ferron reagent was different from that measured in a conventional coagulant assay using the Al–Ferron method. The chemical composition of Al_a, Al_b and Al_c depended on coagulant and solution pH. The Al_b measured in the current case was different from Keggin Al₁₃, and the high Al_b content in the AlCl₃ hydrolysis precipitates could not used as testimony that most of the Al³⁺ was converted to highly charged Al₁₃ species during AlCl₃ coagulation.     

Methodology of industry scale analysis under the constraint of regional resource capacity using HSY algorithm

This paper develops a methodology of proper scale analysis for regional industry development, which can be used in industry planning with the consideration of regional resource capacities. In the face of different data sources and even data scarcity, alternative methods based on linear programming and quadratic programming algorithms for calculating the resource intensity factors are designed. Based on the empirical study of industrialization, initial scenarios of industry development were set. Using HSY algorithm, sensitive industries that may cause exceeding regional resource capacity can be identified, and the risk of exceeding can be predicted and expressed in probability. Furthermore, a proper scale range can be designed for these sensitive industries according to resource capacity. Taking the case of Dalian city in China, this paper estimated the regional urban development plan, various resources capacities were studied, and land resources were estimated to be the most critical resource for the city. The land resource depletion intensities of different industries are calculated by quadratic programming algorithm. Under the constraint of 427.56 km² available industrial land resources, the electronic and power industries have the most significant impact on total land use, if the scale of power industry exceeds 1.27 billion USD, the probability of land resource capacity breakthrough will be 50%.     

Influence of titanium dioxide nanoparticles on speciation and bioavailability of arsenite

In this study, the influence of the co-existence of TiO₂ nanoparticles on the speciation of arsenite [As(III)] was studied by observing its adsorption and valence changing. Moreover, the influence of TiO₂ nanoparticles on the bioavailability of As(III) was examined by bioaccumulation test using carp (Cyprinus carpio). The results showed that TiO₂ nanoparticles have a significant adsorption capacity for As (III). Equilibrium was established within 30 min, with about 30% of the initial As (III) being adsorbed onto TiO₂ nanoparticles. Most of aqueous As (III) was oxidized to As(V) in the presence of TiO₂ nanoparticles under sunlight. The carp accumulated considerably more As in the presence of TiO₂ nanoparticles than in the absence of TiO₂ nanoparticles, and after 25-day exposure, As concentration in carp increased by 44%. Accumulation of As in viscera, gills and muscle of the carp was significantly enhanced by the presence of TiO₂ nanoparticles.     

China's Total Emission Control Policy:a Critical Review

As part of a comprehensive environmental management system, many countries establish emission control targets for mass emissions of a pollutant. Such targets are often the key objective of an environmental policy, such as an emission trading program. In China, however, it is more than just an objective of one particular policy; it has become a concept that has influenced many national environmental policies and activities. The objective of this article is to review the implementation of the total emission c...     

新型悬浮填料澄清池中填料对澄清作用的影响初探

为考察可取代传统二沉池的新型悬浮填料澄清池技术的原理及关键参数,小试试验研究了填料对新型悬浮填料澄清池固液分离过程中附着污泥形成及其絮凝性能的影响,并对填料在澄清中的作用机理进行了探讨。结果表明,当泥水界面上升至填料区后,可以形成较悬浮污泥更加致密稳定的附着污泥区,并形成孔道流,强化了对混合液中污泥颗粒的絮凝效果;填料区可以捕捉去除从悬浮污泥区中“逃逸”的微小污泥絮体,并降低出水浊度,有效地保证了出水水质的稳定性。填料的存在发挥了强大的整流作用,降低了雷诺数Re,提高了弗汝德数Fr,从而改善了污泥絮凝的水力条件,提高了澄清能力。     

废弃印刷线路板碘化法浸金研究

针对碘化法从废弃印刷线路板中提取金的工艺设计,分别考察了碘的质量分数、n(I₂)/n(I^-)比值、固液比、双氧水的质量分数、pH值、浸出时间和浸出温度对金浸出率的影响。结合正交设计优化实验方法,提出了从废弃印刷线路板中碘化法浸取金的最佳工艺条件：碘的质量分数为1.1％,n(I₂)∶n(I^-)=1∶10,双氧水的质量分数为1.5％,浸出时间4 h,固液比为1∶10,浸出温度为常温（25℃）,溶液pH值为中性,此时金浸出率可达97.5％。     

三级串联人工快渗系统处理养殖废水

人工快速渗滤系统（constructed rapid infiltration,CRI）是在传统的污水快速渗透系统上发展起来的一种新的生物处理方法。采用猪粪浸泡污水模拟实际猪场处理系统的厌氧出水,研究三级串联人工快渗系统对其污染物的去除效果。试验结果表明,三级串联系统对废水COD、NH3N的去除率稳定在81%和94.5%,出水均满足了《畜禽养殖行业污染物排放标准》（GB18596-2001）的要求,同时三级串联系统还可以有效预防系统的堵塞。     

不同高级氧化法对水中低浓度药物甲硝唑降解过程的比较

采用UV、H₂O₂、UV/H₂O₂、Fenton、UV/Fenton和UV/TiO₂方法,对水中低浓度的药物甲硝唑进行降解。通过HPLC和UV-Vis光谱得到的甲硝唑去除率。详细讨论了Fe²⁺、TiO₂和H₂O₂的初始浓度以及溶液的初始pH值对降解效率的影响。结果表明,UV/Fenton和UV/TiO₂ 2种系统对水中低浓度甲硝唑均有很好的去除效果,但前者的光催化效率更高。在甲硝唑浓度=6 μmol/L,H₂O₂和Fe²⁺的初始浓度分别为0.5 mg/L和2.94 μmol/L,pH=4的条件下,UV/Fenton方法对甲硝唑水溶液光催化的最佳效率为95.8%。     

微量金属元素及其配合物对厨余垃圾甲烷发酵的影响

生物可利用的微量金属元素不仅能够保证污染物以最大的速率转化,而且还可以使某些特殊的转化得以发生,并提高微生物对有毒污染物质的耐受能力。在研究厨余垃圾总固体浓度(total solid, TS)、接种量和C/N比对厨余垃圾厌氧发酵影响的基础上,重点探讨微量金属元素钴及其配合物丝氨酸对厨余垃圾厌氧发酵甲烷产量及关键酶含量的影响。结果表明,当TS为0.5%、接种污泥量为100 mL/L和C/N比为20∶1时,厨余垃圾厌氧发酵的甲烷产率较高,为367 mL/g COD;添加2 μmol/L的微量金属元素钴-配合物丝氨酸时,甲烷产率则提高到432 mL/g COD,相应地,辅酶M的含量由空白实验的41.21 μmol/g VSS提高到54.64 μmol/g VSS,辅酶F₄₂₀的含量由0.31 μmol/g VSS提高到0.48 μmol/g VSS。