植物对干旱胁迫的响应研究进展

植物在经受干旱胁迫时,通过细胞对干旱信号的感知和传导,调节基因表达,产生新蛋白质,从而引起大量形态、生理和生化上的变化.干旱胁迫对植物在细胞、器官、个体、群体等水平上的形态指标有显著影响,也会影响其光合作用、渗透调节、抗氧化系统等生理生化指标.植物对干旱胁迫的分子响应较复杂,包括合成一些新的基因如NCED、dehydrin基因和CBF、DREB等转录因子.另外,干旱胁迫还能造成蛋白质组学的变化.参52     

Hydroelectricity production and forest conservation in watersheds.

Globally, particularly in developing countries, hydroelectricity production and economic growth occur together with ecosystem/biodiversity conservation in watersheds. There is a relationship between hydroelectricity production and ecosystem/biodiversity conservation in watersheds, centering on the supply and demand for ecosystem services of river water flow regulation and sediment retention. Here we show that, in the upper reach of the Yangtze River, hydroelectricity production of Three Gorges Hydroelectric Power Plant can form a beneficial relationship with forest conservation through the paid use (compensating residents for their cooperation in the conservation) of ecosystem services launched by the National Natural Forest Protection Project. This interaction can provide additional incentives to encourage local communities' long-term cooperation in conserving and protecting the restored forest ecosystems. Hydroelectricity plants also obtain benefits from this interaction. The industrialization of ecosystem services supply provides an operational framework for this beneficial interaction. Sustainable forest ecosystem conservation will require developing new institutions and policies and must involve local communities in the conservation and protection of their local forests.     

铬离子对藻类生长的影响

利用自然光照条件,在不同铬离子质量浓度下,对5种藻类的生长进行了实验研究.研究结果表明:5种藻类在不同的光波长下,其吸收光谱存在两个最强的吸收区: 420～440 nm的蓝紫光部分和660 nm 的红光部分;在不同铬离子质量浓度0～20.63 mg·L-1范围内,5种藻类生长受到不同程度的抑制,其耐受性也尽不相同,经过分析和比较后得出5种藻类对铬的耐受性大小顺序为:微囊藻(Microcystis)＞水华鱼腥藻(Anabaena flos-aquae)＞细长聚球藻(Synechococcus elongatus)＞斜生栅藻(Scenedesmus obliquus)＞蛋白核小球藻(Chlorella pyrenoidose).     

北京市不同区域采暖期大气颗粒物中多环芳烃的分布特征

利用分级采样器分别采集北京市不同区域采暖期的大气颗粒物,分析多环芳烃的组成及含量.结果表明北京市大气总悬浮颗粒物中总多环芳烃的含量城乡结合带为7486—43687ng·m-3,郊区为11993—39786ng·m-3.在城乡结合带,80%以上的多环芳烃存在于粒径<20μm的颗粒物中;在郊区,77%以上的多环芳烃存在于粒径<20μm的颗粒物中.比较不同环数的多环芳烃在不同粒径范围内大气颗粒物中的分配比例,发现随环数的减少其分配比例呈现归一化.不同粒径范围的颗粒物中苯并(a)芘均与总多环芳烃含量显著相关(p<0001).     

不同类型电镀液中阴离子的离子色谱法检测

采用抑制型电导离子色谱法检测电镀液中的常见阴离子.色谱条件是: IonPac AS11-HC阴离子交换色谱柱,淋洗液自动发生装置在线产生KOH梯度淋洗,抑制型电导检测.检测限(S/N=3)在0.29-15.3 μg·l-1,阴离子F-,Cl-,MSA-,NO-3,SO2-4,PO3-4和CrO2-4的线性范围均在两个数量级以上,RSD在5%以下,回收率为92%-110%,具有灵敏度高,选择性好,重现性佳等特点,用于实际样品的检测,结果令人满意.     

交联壳聚糖对铀的吸附研究

以壳聚糖(CTS)为原料,在碱性条件下用环氧氯丙烷对壳聚糖进行化学改性,制得不溶水的交联壳聚糖(CCTS)。利用CCTS吸附铀(UO22+),探讨吸附动力学规律以及初始浓度,pH值的影响。实验结果表明,CCTS对UO22+的吸附符合Langmu ir吸附等温模型,并能用准二级速率方程对吸附动力学加以描述。当在CCTS为10 mg,pH为3,UO22+初始浓度为50μg/mL条件下,CCTS对UO22+的吸附去除率为98%以上。     

铝盐絮凝剂及其环境效应

概述了铝盐絮凝剂的结构、形态分布及铝盐絮凝剂对环境所产生的一些不良影响,描述了铝盐絮凝剂对人体及各种生物体的毒性作用,同时,介绍了对污水后续处理的影响,并作了简要的评述。     

铁炭内电解-厌氧-好氧工艺处理阿维菌素废水的试验研究

血清瓶毒性试验表明 ,AVM对厌氧消化产生强烈的抑制作用。AVM废水经铁炭内电解预处理后 ,COD和AVM的去除率分别达到 19.5 %和 6 8.5 % ,可大大降低废水的毒性。预处理出水再经UASB +生物接触氧化反应器进一步处理 ,当生化系统进水COD为 6 0 0 0— 6 5 0 0mg/L时 ,出水COD为 2 5 0— 2 80mg/L ,总COD去除率达到 95 .6 % ,出水达到生物制药行业排放标准     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

Estimation and characterization of unintentionally produced persistent organic pollutant emission from converter steelmaking processes

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm^?3 in the stack gas and 5.59–87.6 pg WHO-TEQ g^?1 in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm^?3 in the stack gas and 0.03–0.08 pg TEQ g^?1 in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76_, and 229–759 μg t^?1, respectively.