Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water–sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography–mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10⁴?l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water–sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.     

Strahlenbelastung durch Umwelt, Zivilisation und Medizin

Der Vergleich der Strahlendosis aus Umwelt, Zivilisation und Medizin besagt, da? jeder dieser drei Bereiche wesentlich zu der Dosis beitragen kann, die ein Mensch w?hrend seines Lebens erh?lt. Es zeigt sich aber auch, da? es m?glich ist, die Strahlenbelastung zu reduzieren. So steigt bei erh?hter W?rmed?mmung und der damit verbundenen geringeren Ventilation eines Raumes bei bestimmten Baustoffen die Radioaktivit?t in diesen R?umen an. Manche Regionen in der Bundesrepublik Deutschland und in der Welt weisen erhebliche Unterschiede durch terrestrische und kosmische Strahlung auf. Diese Dosis kann bei unterschiedlichen Flugrouten vermieden werden. Die eingesparten Werte k?nnen, z.B., bezogen auf die Gonadendosis, die Strahlenexposition im Rahmen einer R?ntgendiagnostik ausgleichen.     

Light transmission through intraocular lenses with or without yellow chromophore (blue light filter) and its potential influence on functional vision in everyday environmental conditions

In this research the factors used to evaluate the light transmission through two types of acrylic hydrophobic intraocular lenses, one that contained yellow chromophore that blocks blue light transmission and the other which did not contain that filter, were defined according to various light condition, e.g., daylight and at night. The potential influence of light transmission trough intraocular lenses with or without yellow chromophore on functional vision in everyday environmental conditions was analysed.     

Rapid analysis of neonicotinoid insecticides in guttation drops of corn seedlings obtained from coated seeds

Regarding the hypothesis that neonicotinoid insecticides used for seed coating of agricultural crops - mainly corn, sunflower and seed rape - are related to the extensive death of honey bees, the phenomenon of corn seedling guttation has been recently considered as a possible route of exposure of bees to these systemic insecticides. In the present study, guttation drops of corn plants obtained from commercial seeds coated with thiamethoxam, clothianidin, imidacloprid and fipronil have been analyzed by an optimized fast UHPLC-DAD procedure showing excellent detection limits and accuracy, both adequate for the purpose. The young plants grown both in pots - in greenhouse - and in open field from coated seeds, produced guttation solutions containing high levels of the neonicotinoid insecticides (up to 346 mg L(-1) for imidacloprid, 102 mg L(-1) for clothianidin and 146 mg L(-1) for thiamethoxam). These concentration levels may represent lethal doses for bees that use guttation drops as a source of water. The neonicotinoid concentrations in guttation drops progressively decrease during the first 10-15 days after the emergence of the plant from the soil. Otherwise fipronil, which is a non-systemic phenylpyrazole insecticide, was never detected into guttation drops. Current results confirm that the physiological fluids of the corn plant can effectively transfer neonicotinoid insecticides from the seed onto the surface of the leaves, where guttation drops may expose bees and other insects to elevated doses of neurotoxic insecticides.     

Analysis of energy recovery potential using innovative technologies of waste gasification

In this paper, two alternative thermo-chemical processes for waste treatment were analysed: high temperature gasification and gasification associated to plasma process. The two processes were analysed from the thermodynamic point of view, trying to reconstruct two simplified models, using appropriate simulation tools and some support data from existing/planned plants, able to predict the energy recovery performances by process application. In order to carry out a comparative analysis, the same waste stream input was considered as input to the two models and the generated results were compared. The performances were compared with those that can be obtained from conventional combustion with energy recovery process by means of steam turbine cycle. Results are reported in terms of energy recovery performance indicators as overall energy efficiency, specific energy production per unit of mass of entering waste, primary energy source savings, specific carbon dioxide production.     

Combustion sources of particles. 1. Health relevance and source signatures

Combustion processes result in generation of a large number of particle and gaseous products that create health and environmental risks. Of particular importance are the very small particles that are emitted in large quantities from all the combustion sources, and that have been shown to be potentially more significant in terms of their impact on health than larger particles. To control and mitigate the particles with a view of health and environmental risk reduction, a good understanding is necessary of the relative and absolute contribution from the emission sources to the airborne concentrations. This understanding could only be achieved by developing source signature libraries through direct emission measurements from the sources on one hand, and by measuring particle concentrations in the air, and apportioning them to the specific local and distant sources using the signatures, on the other hand. This paper is a review of particle characteristics that are used as source signatures as well as their general advantages and limitations. The second part of the paper reviews source signatures of the most common combustion pollution sources.     

Combustion sources of particles: 2. Emission factors and measurement methods

Emissions from the combustion of biomass and fossil fuels are a significant source of particulate matter (PM) in ambient outdoor and/or indoor air. It is important to quantify PM emissions from combustion sources for regulatory and control purposes in relation to air quality. In this paper, we review emission factors for several types of important combustion sources: road transport, industrial facilities, small household combustion devices, environmental tobacco smoke, and vegetation burning. We also review current methods for measuring particle physical characteristics (mass and number concentrations) and principles of methodologies for measuring emission factors. The emission factors can be measured on a fuel-mass basis and/or a task basis. Fuel-mass based emission factors (e.g., g/kg of fuel) can be readily used for the development of emission inventories when the amount of fuels consumed are known. Task-based emission factors (g/mile driven, g/MJ generated) are more appropriate when used to conduct comparisons of air pollution potentials of different combustion devices. Finally, we discuss major shortcomings and limitations of current methods for measuring particle emissions and present recommendations for development of future measurement techniques.     

Monitoring the levels of brominated and organophosphate flame retardants in passenger cars: Utilisation of car air filters as active samplers

Filters in residential and office air conditioning(A/C) systems have been used as sampling devices for monitoring different pollutants.However,cabin air filters(CAFs) in the A/C system of passenger cars have not been utilised for this purpose.In this study,we collected22 used CAFs from passenger cars in Hanoi,Vietnam to analyse for 8 polybrominated diphenyl ethers(PBDEs) and 10 organophosphate esters(OPEs).All the analytes were detected in more than 50% of samples with the exception of BDE153 and BDE154.The average concentrations of ∑_(10)OPEs and ∑_8 BDEs in the captured dust were 2600 and 40 ng/g,respectively with Tris(1-chloro-2-propyl) phosphate(TCIPP) and BDE209 as the dominant congener in OPE and BDE groups,respectively.CAFs are a potential tool to qualitatively assess the levels of semi-volatile chemicals in suspended dust in cars as a screening step for exposure assessment of those chemicals.     

Sorbents with high efficiency for CO2 capture based on amines-supported carbon for biogas upgrading

Sorbents for CO_2 capture have been prepared by wet impregnation of a commercial active carbon(Ketjen-black, Akzo Nobel) with two CO_2-philic compounds, polyethylenimine(PEI)and tetraethylenepentamine(TEPA), respectively. The effects of amine amount(from 10 to70 wt.%), CO_2 concentration in the feed, sorption temperature and gas hourly space velocity on the CO_2 capture performance have been investigated. The sorption capacity has been evaluated using the breakthrough method, with a fixed bed reactor equipped with on line gas chromatograph. The samples have been characterized by N_2 adsorption–desorption,scanning electron microscopy and energy dispersive X-ray(SEM/EDX). A promising CO_2 sorption capacity of 6.90 mmol/gsorbenthas been obtained with 70 wt.% of supported TEPA at 70℃ under a stream containing 80 vol% of CO_2. Sorption tests, carried out with simulated biogas compositions(CH_4/CO_2mixtures), have revealed an appreciable CO_2 separation selectivity; stable performance was maintained for 20 adsorption–desorption cycles.