pH过程控制对铁炭微电解-Fenton影响中试研究

采用铁炭微电解-Fenton联合工艺处理制药废水生化出水,探讨了初始pH对微电解过程COD降解速率、出水中Fe2+和Fe3+变化规律以及后续Fenton氧化效果的影响,为优化联合工艺提出了微电解反应pH过程控制的理论。采用pH过程控制时,微电解对COD降解速率大大提高,降解过程基本符合零级反应动力学,同时可大大提高Fe2+和Fe3+浓度及总铁析出量。试验结果表明:当初始pH=2.5,以3.0L/h连续性投加稀硫酸100 min,曝气微电解反应2 h,出水再投加1.0mL/L的H2O2进行Fenton氧化2 h,出水COD总去除率可达85.6%;采用pH过程控制可将微电解出水ρ(Fe2+)浓度从48.6 mg/L提高至149 mg/L,COD降解速率从10.9 mg/(L·h)提高至23.8 mg/(L·h)。     

Iron and lead ion adsorption by microbial flocculants in synthetic wastewater and their related carbonate formation

Although microbial treatments of heavy metal ions in wastewater have been studied, the removal of these metals through incorporation into carbonate minerals has rarely been reported. To investigate the removal of Fe^3＋ and Pb^2＋, two representative metals in wastewater, through the precipitation of carbonate minerals by a microbial flocculant （MBF） produced by Bacillus mucilaginosus. MBF was added to synthetic wastewater containing different Fe^3＋ and Pb^2＋ concentrations, and the extent of flocculation was analyzed. CO2 was bubbled into the mixture of MBF and Fe^3＋/Pb^2＋ to initiate the reaction. The solid substrates were analyzed via X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. The results showed that the removal efficiency decreased and the MBF adsorption capacity for metals increased with increasing heavy metal concentration. In the system containing MBF, metals （Fe^3＋ and Pb^2＋）, and CO2, the concentrated metals adsorbed onto the MBF combined with the dissolved CO2, resulting in oversaturation of metal carbonate minerals to form iron carbonate and lead carbonates. These results may be used in designing a method in which microbes can be utilized to combine CO2 with wastewater heavy metals to form carbonates, with the aim of mitigating environmental problems.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultraviolet-visible spectrophotometer within a range of 199–700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596°C.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultravioletvisible spectrophotometer within a range of 199-700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596℃.     

2种生物反硝化法去除地下水中硝酸盐的研究

采用砂柱装置,在实验室研究了自养微生物和异养微生物2种生物反硝化方法对地下水中硝酸盐的去除效果。自养反硝化反应在以硫作为电子供体的硫/石灰石/细沙反应柱中进行,异养反硝化反应在石灰石/细沙反应柱中进行,进水增加乙醇作为外加碳源。实验结果用以比较2种反硝化方法在硝酸盐去除率、微生物反应动力学和反应产物三者的异同。结果表明,自养反硝化反应中NO3--N去除率达95.4%,异养反硝化反应去除率可达99.3%;分别与Monod微生物0级、1/2级和1级反应动力学方程进行拟合,2种反硝化反应均符合1/2级微生物反应动力学,适合用1/2级微生物反应方程描述;在反应结束阶段,自养反硝化主要反应产物SO42-出水浓度低于250mg/L,异养反硝化副产物CH3OO-易成为二次污染源,异养反硝化的反硝化速率明显高于自养反硝化反应。     

生活垃圾中废塑料分选回收技术概述

近年来,废塑料在城市生活垃圾中占有相当大的比例,其含量正呈逐年上涨的趋势,因此对塑料进行分选和资源化利用势在必行。塑料分选技术是摆在我们中间的一项难题,目前生活垃圾废塑料的分选技术五花八门．由于在全国各地废塑料在垃圾中的还水量等因素的影响,现实中能实现废塑料的分选还不成熟。因此,研究一套适合废塑料的分选技术迫在眉睫。     

国家环境保护模范城市动态管理系统研究

按照创建国家环境保护模范城市的资料整编要求以及对环保模范城市持续改进的工作需要,本着方便查阅、体现过程、节约环保、突出特色的原则,研究构思了国家环境保护模范城市动态管理系统,以期为申请创建的城市提供参考。     

一维流三维水动力弥散测定仪的研制

针对目前传统的室内一维、二维测定装置不能完全反映污染物运移过程中的空间特征,设计了一种能测定三维水动力弥散的试验装置。该装置结合平面二维和剖面二维的测定,可以综合反映水动力弥散系数在三维空间的变化规律。通过试验数据显示:平面和剖面上的纵向水动力弥散系数都在0.02左右,平面上的横向水动力弥散系数小于纵向水动力弥散系数3倍左右,而剖面上的横向水动力弥散系数小于纵向水动力弥散系数数十倍;另外,通过分析一维流三维水动力弥散的特征,对试验的效果进行了评价,结果表明该试验装置具有较高的准确性和精度。     

人工湿地处理不同废水工艺与植物优化配置研究

从各种废水处理技术类型及其处理效果与经济效益出发,针对近年来人工湿地技术的应用情况,综述了国内外利用人工湿地技术处理生活污水、污染河流和富营养化水体、农村污水和畜牧养殖废水、城市地表径流、工业废水(包括造纸废水、油田废水、矿区废水等)等方面的进展,分析了人工湿地处理不同废水的工艺流程,并对湿地植物优化配置提出了相应建议,旨在为人工湿地处理废水的工程应用提供技术参考.     

公交车车内噪声测量及降噪措施的探索

针对人们普遍感到现行公交车内噪声大的情况,对广州市液化石油气新型空调公交车内的噪声进行了噪声实测,测量结果显示公交车内的噪声在70 dB以上.对公交车上主要噪声源和对车内噪声的影响因素进行分析,针对公交车上主要的噪声源和影响因素,对测试公交车进行简单的改装,然后对改装车辆进行测量,结果显示减噪效果相当明显.因此,对于目前广州公交车噪声偏大的实际情况,提出了有效降低车辆内部噪声的主要措施.