EXPOSURE ASSESSMENT OF POPULATIONS USING ENVIRONMENTAL MODELING,DEMOGRAPHIC ANALYSIS,AND GIS1

ABSTRACT: Simulation of ground-water flow and fate of contaminants in the subsurface environment constitutes a major phase of most environmental assessment and site remediation studies. These simulation studies yield information on spatial and temporal distributions of contaminants in the subsurface media. An important use of this information is to conduct exposure assessment studies. Spatial and temporal distributions of both chemical concentrations and exposed populations render this integrated exposure analysis task rather difficult. Geographic Information Systems (GIS), on the other hand, provide a platform in which layered, spatially distributed databases can be manipulated with ease, thereby simplifying exposure analysis tasks significantly. In this paper, we describe procedures that combine the simulation models and demographic databases under a GIS platform to automate the exposure assessment phase of a typical health assessment study. Procedures developed herein significantly simplify the post-processing phase of the analysis, and render the overall task more ‘user friendly.’ A site-specific application is included as a demonstration of the proposed process.     

PARTITIONING SMALL SCALE SPATIAL VARIABILITY OF RUNOFF AND EROSION ON SAGEBRUSH RANGELAND1

ABSTRACT: Most hydrologic models require input parameters which represent the variability found across an entire landscape. The estimation of such parameters is very difficult, particularly on rangeland. Improved model parameter estimation procedures are needed which incorporate the small-scale and temporal variability found on rangeland. This study investigates the use of a surface soil classification scheme to partition the spatial variability in hydrologic and interrill erosion processes in a sagebrush plant community. Four distinct microsites were found to exist within the sagebrush coppice-dune dune-interspace complex. The microsites explained the majority of variation in hydrologic and interrill erosion response found on the site and were discernable based on readily available soil and vegetation information. The variability within each microsite was quite low and was not well correlated with soil and vegetation properties. The surface soil classification scheme defined in this study can be quite useful for defining sampling procedures, for understanding hydrologic and erosion processes, and for parameterizing hydrologic models for use on sagebrush range-land.     

Storage stability of injection-molded starch-zein plastics under dry and humid conditions

Corn starch and zein mixtures (4 : 1 dry weight) were extruded and injection-molded in the presence of plasticizers (glycerol and water). Tensile strength and percentage elongation of the molded plastics were measured before and after 1 week of storage under a dry or humid condition (11 or 93% RH). With 10–12% glycerol and 6–8% water, injection-molded plastics had relatively good tensile properties (20- to 25-MPa tensile strength and 3.5–4.7% elongation). But while exposed to dry conditions (11% RH), the molded plastics lost weight (0.5–1.5% in 7 days) and became very brittle, with significant decreases in tensile strength and elongation. Partial replacement (5–10%) of starch with a maltodextrin (average DE 5) reduced the glass transition and melting temperatures of the starch-zein mixture as well as the dry storage stability. Using potato starch instead of corn starch significantly improved the dry storage stability of the injection-molded starch-zein plastics (18- vs 11-MPa tensile strength). Anionic corn starches with a maleate or succinate group (DS<0.01) produced injection-molded plastics with improved tensile properties and storage stability. Plastics prepared from the starch maleate and zein mixture retained the strength during 1 week of dry storage without a significant change (26-MPa tensile strength and 3.7% elongation after 1 week of storage).Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Journal paper No. J-15561 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa, Project No. 2863.     

Soil washing treatability tests for pesticide-contaminated soil

The 1987 Sand Creek Operable Unit 5 record of decision (ROD) identified soil washing as the selected technology to remediate soils contaminated with high levels of organochlorine pesticides, herbicides, and metals. Initial treatability tests conducted to assess the applicability of soil washing technology did not effectively evaluate the removal of the elevated contaminant concentrations that were found. To further evaluate the applicability of soil washing at this industrial site, a second more comprehensive pilot-scale treatability test was conducted. Twenty-three test runs were conducted over a two-week period in late September 1992, using a pilot-scale soil washing device called the volume reduction unit (VRU). The experimental design evaluated the effects of two wash temperatures, two pH levels, three surfactants, four surfactant concentrations, and two liquid-to-soil ratios on the contaminant removal efficiency of the soil washing process. Site soils from layers at three different depths were used in the study. Results from the pilot-scale treatability test indicated that the VRU could achieve contaminant reduction efficiencies of 97 percent for heptachlor and greater than 91 percent for dieldrin in the uppermost contaminated soils (surface to 1-ft. depth). Residual concentrations of heptachlor and dieldrin in the treated soil ranged from 50 ppm to less than 1.6 ppm, and 6.8 ppm to less than 1.6 ppm, respectively. However, the analytical method detection limit of 1.6 ppm was not low enough to provide residual concentration data at the risk-based action levels of 0.55 ppm for heptachlor and 0.15 ppm for dieldrin.     

Fog collection's role in water planning for developing countries

In certain locations, the combination of meteorological conditions and topography are such that persistent fogs cover coastal or interior mountains. The droplets from these fogs are collected by trees or other tall vegetation. They can also be collected by appropriately designed man-made collectors, to provide large volumes of water for domestic, agriculture or forestry uses. The largest project to date has provided, since March 1992, an average of 11 000 litres of water per day (*****l/d) to a village of 330 people in the arid coastal desert of northern Chile. This project and others are reviewed. The impact of the deforestation of high elevation areas, and the subsequent loss of fog water input in a watershed are discussed, as are guidelines for water planners.     

Perceptions of the security and attractiveness of urban parking lots

This study concerns design features of urban parking lots which can increase the perception of such areas as both safe and attractive. College students evaluated the attractiveness and perceived security associated with 180 scenes of parking lots adjacent to commercial and multi-family residential structures in Atlanta and Athens, Georgia, U.S.A. High intergroup correlations (r > 0·90) indicated the reliability of evaluations of both perceived features. Regressions of physical features on perceived security ratings and attractiveness ratings yielded highly predictive models (R² = 0·76 and 0·80, respectively). For both sets of ratings a Maintenance and Design factor accounted for the most variance. Although attractiveness ratings were higher as the total amount of vegetation increased in a scene, security was in general rated higher only when vegetation was well maintained and appeared to be installed as part of a landscape design. Attractiveness was generally higher for multi-family residential scenes than for commercial scenes. Perceived security was higher for frontal views of structures, especially when entrances were proximate to the viewer. Research implications are discussed in terms of the impact of natural features in urban areas for increasing attractiveness and reducing fear of crime.     

OPTIMAL IDENTIFICATION OF MUSKINGUM ROUTING COEFFICIENTS1

Traditionally, identification of the Muskingum routing coefficients has been based on observations of the linearity of a loop formed by graphically plotting a forward and a reverse path. This graphical procedure is time-consuming and may not minimize the error of estimation. A procedure was developed to improve the drawbacks of the graphical method. This procedure calls for (a) the use of least square regression on the forward and reverse paths to determine their respective slopes, and (b) the use of statistical t-test to evaluate the hypothesis that these two slopes are equal. The computational procedure is repeated, using incremental values of the flow weighting coefficient, x. A graph of the computed t-value versus x can be constructed. The optimal value of x, as read from the graph, occurs at the minimum computed t-value. The procedure has been demonstrated superior to the graphical method for three illustrative examples, resulting in a reduction of the error squares by factors ranging from 5 to 6.     

Biogeochemical cycling of selenium in the San Joaquin Valley,California, USA

Subsurface agricultural drainage waters from western San Joaquin Valley, California, were found to contain elevated concentrations of the element selenium in the form of selenate. In 1978, these drainage waters began to replace previous input to Kesterson Reservoir, a pond system within Kesterson National Wildlife Refuge; this substitution was completed by 1982. In the 1983 nesting season, unusual rates of deformity and death in embryos and hatchlings of wild aquatic birds (up to 64% of eared grebe and American coot nests) occurred at the refuge and were attributed to selenium toxicosis. Features necessary for contamination to have taken place included geologic setting, climate, soil type, availability of imported irrigation water, type of irrigation, and the unique chemical properties of selenium. The mechanisms of biogeochemical cycling raise questions about other ecosystems and human exposure.