Contamination of polycyclic aromatic hydrocarbons (PAHs) in urban soils in Beijing, China

Soil contamination with polycyclic aromatic hydrocarbons (PAHs) is an increasing problem in many countries, including China. An extensive and systematic survey has been undertaken to evaluate the contamination with PAHs of urban soils in Beijing, China. Soil samples were collected from campuses of universities, schools and kindergartens, public squares, fallow land and roadsides, and were analyzed for 16 PAHs by GC-MS. There was a high variability in the total PAHs (SigmaPAHs) concentrations, ranging from less than 366 to 27,825 ng g(-1). The highest SigmaPAHs concentrations were found at roadsides and industrial sites. Soil organic carbon (SOC) is one of the important factors that can influence the concentrations of PAHs in soils. It was found that concentrations of SigmaPAHs were significantly correlated with that of soil organic carbon. To trace the sources of PAHs, the ratios of phenanthrene to anthracene and fluoranthene to pyrene were used to identify pyrogenic and petrogenic sources, respectively. In most cases, PAHs in soils in urban areas of Beijing were pyrogenic. These sources included motor vehicle exhausts, industrial activities and coal burning. These data can be further used to assess the health risk associated with soils polluted with PAHs.     

The effect of ageing on the bioaccessibility and fractionation of cadmium in some typical soils of China

Ingestion of contaminated soil has been recognized as an important exposure pathway of cadmium (Cd) for humans, especially for children through outdoor hand-to-mouth activities. The effect of ageing process following the input of Cd into soil on the bioaccessibility of Cd in five typical soils of China was investigated using physiologically based in vitro test in this study. A sequential extraction procedure was employed with attempt to identify the bioaccessible fraction(s) of Cd in soils. The bioaccessibility of Cd in strongly acidic (approximately pH 4.5) soils reached nearly steady levels (76.5-76.9% and 52.0-52.6% in the gastric and small intestinal phases, respectively) after a sharp decline in the first week of ageing. In contrast, the bioaccessibility of Cd in higher pH (>6.0) soils was found to be much lower (53.3-72.7% and 29.9-43.4% in gastric and small intestinal phases, respectively) and took 2 weeks of ageing to reach steady levels. The freshly spiked Cd was more labile than native Cd. The main proportion of spiked Cd was found in exchangeable Cd which was higher in strongly acidic soils (68.6-71.8%) than in higher pH soils (53.4-61.4%) at day 120 after a sharp decline to the nearly steady state in the first 1 and 2 weeks, respectively. Significant correlations between Cd bioaccessibility and either water soluble and exchangeable Cd individually, or the sum of water soluble and exchangeable Cd throughout the incubation period for all soils, indicate that these forms of Cd are likely to constitute the main proportion of bioaccessible Cd in soils.     

Media Framing of Zoos and Aquaria: From Conservation to Animal Rights

Zoos and aquaria are controversial institutions, vilified by animal rights activists and championed by those who value their entertainment and educational resources. Examining media frames of these institutions can identify public perspectives. A qualitative content analysis was conducted for print and online magazine articles that discussed zoos and aquaria in North America. Sixty-five articles were analysed, and eight different frames were identified. The diverse frames highlight the differing roles of zoos and aquaria. Most of the articles were positive and supportive of zoos; 11% were negative. Animal welfare was the most common frame, from both positive and negative perspectives. Other frames, such as conservation and education, were less prevalent in the sample than expected, since zoos and aquaria portray themselves to be leaders in these fields. The unbalanced media discourse and small publication rate over the four years sampled suggest opportunities for increased media engagement on zoos and aquaria.     

Partitioning Gas Tracer Tests for Measurement of Water in Municipal Solid Waste

Abstract

A key component in the operation of almost all bioreactor landfills is the addition of water to maintain optimal moisture conditions. To determine how much water is needed and where to add it, in situ methods are required to measure water within solid waste. Existing technologies often result in measurements of unknown accuracy, because of the variability of solid waste materials and time-dependent changes in packing density, both of which influence most measurement methods. To overcome these problems, a new technology recently developed by hydrologists for measuring water in the vadose zone—the partitioning gas tracer test—was tested. In this technology, the transport behavior of two gas tracers within solid waste is used to measure the fraction of the void space filled with water. One tracer is conservative and does not react with solids or liquids, while a second tracer partitions into the water and is separated from the conservative tracer during transport. This technology was tested in four different solid waste packings and was capable of determining the volumetric water content to within 48% of actual values, with most measurement errors less than 15%. This technology and the factors that affect its applicability to landfills are discussed in this paper.     

Emission factor of exhaust gas constituents during the pyrolysis of zinc chloride immersed biosolid

Pyrolysis enables ZnCl₂ immersed biosolid to be reused, but some hazardous air pollutants are emitted during this process. Physical characteristics of biosolid adsorbents were investigated in this work. In addition, the constituents of pyrolytic exhaust were determined to evaluate the exhaust characteristics. Results indicated that the pyrolytic temperature was higher than 500 °C, the specific surface area was >900 m²/g, and the total pore volume was as much as 0.8 cm³/g at 600 °C. For non-ZnCl₂ immersed biosolid pyrolytic exhaust, VOC emission factors increased from 0.677 to 3.170 mg-VOCs/g-biosolid with the pyrolytic temperature increase from 400 to 700 °C, and chlorinated VOCs and oxygenated VOCs were the dominant fraction of VOC groups. VOC emission factors increased about three to seven times, ranging from 1.813 to 21.448 mg/g for pyrolytic temperatures at 400–700 °C, corresponding to the mass ratio of ZnCl₂ and biosolid ranging from 0.25–2.5.     

Postnatal management and long-term outcome for survivors with congenital diaphragmatic hernia

Significant advances in the postnatal management of patients with congenital diaphragmatic hernia (CDH) have resulted in a remarkable improvement in survival rates over the past two decades. The success of current postnatal management of CDH patients has rendered fetal intervention to be limited to the most severe cases, and the role for prenatal treatment of CDH patients remains unclear. The adoption of lung-preserving strategies including high-frequency oscillatory ventilation (HFOV) and extracorporeal membrane oxygenation (ECMO) have improved CDH outcomes especially in those patients with significant ventilatory or circulatory compromise. Survival rates of up to 90% are being reported in some high-volume centers. However, the increased survival in CDH patients has been accompanied by an increase in neurological, nutritional and musculoskeletal morbidity among the long-term survivors. This has resulted in the need to provide resources for the long-term follow-up and support of this patient population. In this article, the postnatal management strategies and primary and secondary outcomes of high-volume international pediatric surgical centers will be reviewed. Finally, the role of a multidisciplinary management team for the follow-up of long-term CDH survivors will be discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of contamination in and toxicities of a shipyard area in Hong Kong

This is the first integrated study on the contaminant characterization and toxicities of a shipyard area. This site in Hong Kong contained 3.6-33.4 mg kg(-1) dichlorodiphenyltrichloroethane and 5-79 g kg(-1) oil and grease. Other pollutants exceeding the Dutch intervention values were total polyaromatic hydrocarbons, total petroleum hydrocarbons, and metals Cu, Pb and Zn. These pollutants persisted partially owing to the poor fertility with <125 mg N kg(-1) and <530 mg P kg(-1) typical of coastal soil. Sediments collected within 100 m also showed contamination exceeding the China and Hong Kong intervention levels. The shipyard soil killed two bacteria Pseudomonas stutzeri and Acinetobacter sp. isolated from a clean coastal soil, inhibited germination of three exogenous plants Triticum aestivum, Brassica chinense and Lolium perenne, and inhibited proliferation of three indigenous bacteria: Methylobacterium sp., Pseudomonas aeruginosa and Bacillus cereus. Thus, ex situ remediation was needed.     

Rubber tire life cycle assessment and the effect of reducing carbon footprint by replacing carbon black with graphene

This research utilizes real operating data from a tire plant operating in Central Taiwan to investigate the carbon footprint emissions (CO₂e) involved in producing the electric bicycle. The simulation results are based on the PAS 2050 standard using the SimaPro 7.3 software tool. Our results show the total carbon footprint emissions of 1.2-kg tire for the electric bicycle weighing 4.53-kg CO₂e, composed of 2.63-kg CO₂e from raw tire materials stage, 1.295-kg CO₂e from tire manufacturing stage, and 0.605-kg CO₂e from tire transport stage. An international certified organization, British Standard Institute (BSI), verified the accuracy of our results as 98.7%. We found that carbon emissions at the raw materials stage were higher than that for the other two stages – manufacturing and transportation. Carbon black was determined as the maximum source of carbon emissions at the raw material stage. To reduce the tire plant carbon emissions, this paper recommends using graphene to replace carbon black. Graphene has been reported by many researches to improve the properties of rubber products. From our simulation results, the carbon footprint emissions of 4.56-kg CO₂e of the origin tire plant uses 0.456-kg carbon black to produce 1.2-kg electric bicycle tires. This can be reduced to 4.29 (5.92%), 4.03 (11.62%), 3.75 (11.76%), and 3.49-kg CO₂e (23.46%) by using graphene to replace carbon black 25, 50, 75, and 100 wt% respectively. If we focus only on 0.456-kg carbon black producing 1.08-kg CO₂e, the reduced carbon footprint will be 0.812 (24.81%), 0.547 (49.35%), 0.28 (74.07%), and 0.0128-kg CO₂e (98.81%) by using graphene to replace carbon black 25, 50, 75, and 100 wt% respectively. From our analysis, graphene replacing carbon black can reduce carbon footprint. This has not been published previously and provides a direction for the tire plant to save carbon emissions.     

Benefits of clean development mechanism application on the life cycle assessment perspective: a case study in the palm oil industry

This study performed an assessment on the beneficial of the Clean Development Mechanism (CDM) application on waste treatment system in a local palm oil industry in Malaysia. Life cycle assessment (LCA) was conducted to assess the environmental impacts of the greenhouse gas (GHG) reduction from the CDM application. Calculations on the emission reduction used the methodology based on AM002 (Avoided Wastewater and On-site Energy Use Emissions in the Industrial Sector) Version 4 published by United Nations Framework Convention on Climate Change (UNFCC). The results from the studies showed that the introduction of CDM in the palm oil mill through conversion of the captured biogas from palm oil mill effluent (POME) treatment into power generation were able to reduce approximate 0.12 tonnes CO2 equivalent concentration (tCO2e) emission and 30 kW x hr power generation per 1 tonne of fresh fruit bunch processed. Thus, the application of CDM methodology on palm oil mill wastewater treatment was able to reduce up to 1/4 of the overall environment impact generated in palm oil mill.