2种耐寒生态浮床植物的水质改善性能研究

引种了2种陆地湿生的耐寒植物——黄菖蒲和西伯利亚鸢尾作为生态浮床植物,以水生美人蕉为对比,进行了水质改善实验研究。在6个月实验期内,黄菖蒲、西伯利亚鸢尾和美人蕉（5个月）对SRP的平均去除速率分别为79.27、20.92和34.29 mg/（m²?d）,对TP的平均去除速率分别为86.92、24.91和36.6 mg/（m²?d）,对NH⁺₄-N的平均去除速率分别为517.54、170.57和274.07 mg/（m²?d）,对TN的平均去除速率分别为763.79、301.81和384.04 mg/（m²?d）。黄菖蒲年去除磷的量21 207.64 mg/（m²?a）,是西伯利亚鸢尾的2.6倍,是美人蕉的3.8倍;年去除氮的量186 365.78 mg/（m²?a）,是西伯利亚鸢尾的1.9倍,美人蕉的3.2倍。黄菖蒲和西伯利亚鸢尾耐寒能越冬,生长期长,管理工作量小。     

生物法降解养殖场臭气中H2S的反应器启动

畜禽养殖场臭气成分复杂,完全去除较为困难。生物法是目前应用较广泛的脱臭方法,其中能否将生物膜附着在填料上是影响生物法去除恶臭气体效率的重要因素。本实验采用定时定量投加Na2S的方式驯化活性污泥,并选用MLSS浓度和SO42-浓度增量变化2个指标作为污泥驯化成熟的指标,比传统的以MLSS作为污泥驯化成熟的指标更准确。采用循环污泥的挂膜方式,运行2 d后,通入新鲜的空气和H2S气体,2周后反应器启动成功。     

Catalytic Activity of Biomorphic α-MoO(3) in the Degradation of Methyl Violet Dye

A network of fibers comprising orthorhombic molybdenum trioxide (α-MoO(3)) crystals were synthesized using paper as template via a biomorphic approach. The template was completely removed by annealing the sample at 600°C for 5?min. Monoclinic MoO(3) was formed and consequently converted into orthorhombic α-MoO(3) after prolonged annealing. Three milligrams of the biomorphic α-MoO(3) could degrade up to 90% of a methyl violet aqueous solution with a concentration of 20?mg/L under normal visible light. The size of the α-MoO(3) grains and the porosity of the biomorphic sample affected catalytic performance.     

Arsenic, copper, and zinc contamination in soil and wheat during coal mining, with assessment of health risks for the inhabitants of Huaibei, China

Field studies were conducted to investigate arsenic (As), copper (Cu), and zinc (Zn) contamination in agricultural soils and wheat crops at two areas in Huaibei, China. Area A is in the proximity of Shuoli coal mine. In area B, three coal mines and a coal cleaning plant were distributed. The potential health risk of As, Cu, and Zn exposure to the local inhabitants through consumption of wheat grains was also estimated. The results showed that significantly higher (p?<?0.05) concentrations of As, Cu, and Zn were found in soils collected from area B than in those from area A. Arsenic concentrations in wheat sampled from area A were negatively correlated with the distance from the coal mine (p?<?0.001). Concentrations of Cu and Zn in wheat seedlings and grains collected from area B were significantly higher (p?<?0.05) than in those collected from area A, with the exception of Zn in wheat seedlings. Concentrations of Cu and Zn in most wheat grain samples were above the permissible limits of Cu and Zn in edible plants set by the Food and Agriculture Organization/World Health Organization. The hazard index of aggregate risk through consumption of wheat grains was 2.3–2.4 for rural inhabitants and 1.4–1.5 for urban inhabitants. The average intake of inorganic As for rural inhabitants in Huaibei was above 10 μg day^?1. These findings indicated that the inhabitants around the coal mine are experiencing a significant potential health risk due to the consumption of locally grown wheat.     

Performance Characteristics of PM10 Samplers under Calm Air Conditions

ABSTRACT

The size range of airborne particles that is closely related to specific deposition regions in the human respiratory tract and excess lung burden of these deposited particles is associated with disease. Size-selective sampling, therefore, needs to be performed to assess the related health risks. Performance criteria applied to these samplers must be well characterized in order to provide accurate and reliable results. The PM₁₀ samplers that have been used in place of the total suspended particulate samplers for the collection of ambient air particles are more relevant to potential inhalation hazards. In order to be certified, a PM₁₀ sampler must meet reliable performance specifications, primarily the aerosol penetration test with liquid and solid particles in a wind tunnel (wind speeds of 2, 8, and 24 km/hr). This testing is intended to assure reasonable accuracy in aerosol measurements. However, the sampler performance under calm air conditions has not been well studied.

In the present study, the sampling heads of three devices—the Harvard impactor, the Personal Environmental Monitor (PEM), and the Sierra Andersen model 241 dichotomous sampler PM₁₀ inlet head—were tested for aerosol separation efficiency. With the consideration of bias and imprecision of the measurements, five specimens of each type of sampler were chosen for performance testing, repeating the tests 5 times for each specimen. An ultrasonic atomizing nozzle was used to nebulize potassium sodium tartrate tetrahydrate and dioctyl phthalate particles as the solid and liquid challenge aerosols, respectively. The aerosol number concentrations and size distributions upstream and downstream of the samplers were measured by using an aerosizer calibrated against a settling velocity chamber. The results showed that among the samplers tested, the dichotomous sampler PM₁₀ inlet head had the best fit to the PM₁₀ convention, while the other two samplers not only appeared to have a steeper separation-curve slope but also had significant particle bounce when challenged with solid particles. Analysis of variance also confirmed the superiority of the dichotomous samplers. Surface-coating with oil or grease greatly reduced the problem of particle bounce.     

Adsorption Characteristics of Benzene on Biosolid Adsorbent and Commercial Activated Carbons

Abstract

This study selected biosolids from a petrochemical waste-water treatment plant as the raw material. The sludge was immersed in 0.5-5 M of zinc chloride (ZnCl₂) solutions and pyrolyzed at different temperatures and times. Results indicated that the 1-M ZnCl₂-immersed biosolids pyrolyzed at 500 °C for 30 min could be reused and were optimal biosolid adsorbents for benzene adsorption. Pore volume distribution analysis indicated that the mesopore contributed more than the macropore and micropore in the biosolid adsorbent. The benzene adsorption capacity of the biosolid adsorbent was 65 and 55% of the G206 (granular-activated carbon) and BPL (coal-based activated carbon; Calgon, Carbon Corp.) activated carbons, respectively. Data from the adsorption and desorption cycles indicated that the benzene adsorption capacity of the biosolid adsorbent was insignificantly reduced compared with the first-run capacity of the adsorbent; therefore, the biosolid adsorbent could be reused as a commercial adsorbent, although its production cost is high.     

光催化降解水体异味物质2-MIB的机理

以水体异味物质2-甲基异莰醇(2-methylisoborneol,2-MIB)为研究对象,在紫外光(λ<380 nm)照射下,探讨TiO2(P25)对2-MIB的光催化降解特性及光化学作用机理。结果表明,UV/TiO2光催化体系可以有效去除水体异味物质2-MIB,紫外光照射60 min,对2-MIB的降解率达95%。同时研究了光催化降解体系介质pH,共存腐殖酸(HA)和过硫酸钾(K2S2O8)对UV/TiO2光催化体系降解2-MIB的影响,发现低浓度HA([HA]≤0.5 mg/L)可以提高2-MIB降解速率,当HA浓度高于0.5 mg/L,2-MIB降解反应受到抑制;同时当加入电子受体K2S2O8后,降解体系中活性物种羟基自由基(.OH)明显增加,提高了TiO2对2-MIB的降解能力。利用苯甲酸荧光光度法和POD-DPD显色法跟踪测定降解过程中羟基自由基(·OH)和过氧化氢(H2O2)的变化,表明光催化反应涉及·OH机理。     

The oxidation mechanism of polychlorinated dibenzo-p-dioxins under the atmospheric conditions - A theoretical study

The atmospheric polychlorinated dibenzo-p-dioxins (PCDDs) partition appreciably in the gas phase, where they undergo rapid oxidation. The atmospheric oxidation mechanisms of a few PCDDs, initiated by OH radical, are studied using density functional theory calculations. The oxidations start with OH-addition to the aromatic rings, dominantly at γ-sites, followed by the non-chlorinated β-sites; while additions to the α-sites or chlorinated sites are negligible. For PCDDs with all β-sites being chlorinated, formation of PCDD-γ-OH adducts become virtually the only reaction path. Under the atmospheric conditions, the PCDD-β/γ-OH adducts combine with O₂ slowly at rates <1 s⁻¹. Instead, the PCDD-β-OH adducts will react with O₂ through hydrogen abstraction at rates <50 s⁻¹, forming PCDD-β-ol, and the PCDD-γ-OH adducts will decompose to the substituted phenoxy radicals by fused-ring C-O bond cleavage at rates of 10³ ∼ 10⁵ s⁻¹. The reaction mechanisms of PCDDs are drastically different from the peroxy mechanism for the atmospheric oxidations of benzene and dibenzofuran.     

Citrobacter sp.CK3对活性红KN-3B的脱色反应动力学研究

采用脱色菌Citrobacter sp. CK3,以活性红KN-3B染料为处理对象,在厌氧批式反应条件下,系统考察了pH值,温度和染料浓度对脱色反应速度的影响;通过动力学模拟及反应过程中染料的UV-Vis扫描图分析,探讨了脱色反应机理。结果表明:Citrobacter sp. CK3对活性红KN-3B的脱色反应的适宜pH为7～9;脱色反应速度在温度为32℃时达到最大。染料初浓度从57 mg/L逐渐增大到458 mg/L时脱色率逐渐降低。脱色过程中染料的偶氮键发生断裂,脱色反应符合二级反应动力学。     

多孔矿物载体厌氧固定床处理有机废水研究

通过天然浮石和塑料多孔空心球而制成复合式多孔矿物载体应用于厌氧固定床反应器中,研究反应器挂膜性能,以及处理生活污水、啤酒废水效果,应用扫描电镜观察生物膜微生物相的形态结构.结果表明,反应器挂膜69 d后COD去除率稳定在70%以上,初次启动成功;处理生活污水中平均COD去除率为61.72%;处理啤酒废水中COD去除率高...