Chemical speciation,transport and contribution of biomass burning smoke to ambient aerosol in Guangzhou,a mega city of China

Intensive measurements of aerosol (PM₁₀) and associated water-soluble ionic and carbonaceous species were conducted in Guangzhou, a mega city of China, during summer 2006. Elevated levels of most chemical species were observed especially at nighttime during two episodes, characterized by dramatic build-up of the biomass burning tracers levoglucosan and non-sea-salt potassium, when the prevailing wind direction had changed due to two approaching tropical cyclones. High-resolution air mass back trajectories based on the MM5 model revealed that air masses with high concentrations of levoglucosan (43–473 ng m^?3) and non-sea-salt potassium (0.83–3.2 μg m^?3) had passed over rural regions of the Pearl River Delta and Guangdong Province, where agricultural activities and field burning of crop residues are common practices. The relative contributions of biomass burning smoke to organic carbon in PM₁₀ were estimated from levoglucosan data to be on average 7.0 and 14% at daytime and nighttime, respectively, with maxima of 9.7 and 32% during the episodic transport events, indicating that biomass and biofuel burning activities in the rural parts of the Pearl River Delta and neighboring regions could have a significant impact on ambient urban aerosol levels.     

Measurement of the surface charge of ultrafine particles from laser printers and analysis of their electrostatic force

Ultrafine particles (UFPs) released from laser printers are electrostatically charged during the working processes of the devices, and the electrostatic force can obviously influence the dynamics of the particles. Due to the measurement difficulty and scarcity of relevant research, this issue was not reported. This study tried to address this issue through experimental measurement of the surface charge of UFPs and numerical investigation on the influence of electrostatic force on the dynamics of UFPs. A test chamber was set up to collect the UFPs, and the Scanning Electron Microscope was used to observe the morphologies of the UFPs. Based on the particle diameter and surface zeta potential, the surface charge of UFPs was calculated. The measurement results gave that particle emitted from laser printers are negatively charged and the average surface charge of particle emissions for four laser printers is in a range of about ?4.16 × 10^?17 to ?6.07 × 10^?17 C (～?260 to ?379 e). This paper also discussed the influence of electrostatic force on the dynamics of UFPs. According to the numerical investigation, it was found that, in the absence of electric field, the electrostatic force has to be considered when the surface charge is larger than 1 × 10^?16 C and when the UFP is very close to the wall with a distance of less than 0.01 m. These findings will guide constructively in predicting the dispersion and deposition of particles emitted from laser printers.     

Analysis of 3-year observations of CFC-11, CFC-12 and CFC-113 from a semi-rural site in China

In-situ measurements of atmospheric chlorofluorocarbons (CFCs) can be used to the assess their global and regional emissions and to check for compliance with phase-out schedules under Montreal protocol and its amendments. The atmospheric mixing ratios of CFC-11 (CCl₃F), CFC-12 (CCl₂F₂) and CFC-113 (CCl₂F–CClF₂) have been measured by an automated in-situ GC-ECDs system at the regional Chinese Global Atmosphere Watch (GAW) station Shangdianzi (SDZ), from November 2006 to October 2009. The time series for these three principal CFCs showed large episodic events and background conditions occurred for approximately 30% (CFC-11), 52% (CFC-12) and 56% (CFC-113) of the measurements. The mean background mixing ratios for CFC-11, CFC-12 and CFC-113 were 244.8 ppt (parts per trillion, 10^?12, molar) 539.6 ppt and 76.8 ppt, respectively, for 2006–2009. The enhanced CFC mixing ratios compared to AGAGE sites such as Trinidad Head (THD), US and Mace Head (MHD), Ireland suggest regional influences even during background conditions at SDZ, which is much closer to highly-populated areas. Between 2006 and 2009 background CFCs exhibited downward trends at rates of ?2.0 ppt yr^?1 for CFC-11, ?2.5 ppt yr^?1 for CFC-12 and ?0.7 ppt yr^?1 for CFC-113. De-trended 3-year average background seasonal cycles displayed small fluctuations with peak-to-trough amplitudes of 1.0 ± 0.02 ppt (0.4%) for background CFC-11, 1.3 ± 2.1 ppt (0.3%) for CFC-12 and 0.2 ± 0.4 ppt (0.3%) for CFC-113. On the other hand, during pollution periods these CFCs showed much larger seasonal cycles of 11.2 ± 10.7 ppt (5%) for CFC-11, 7.5 ± 6.5 ppt (2%) for CFC-12 and 1.0 ± 1.2 ppt (1.2%) for CFC-113, with apparent winter minima and early summer maxima. This enhancement was attributed to prevailing wind directions from urban regions in summer and to enhanced anthropogenic sources during the warm season. In general, horizontal winds from northeast showed negative contribution to atmospheric CFCs loading, whereas South Western advection (urban sector: Beijing) had positive contributions.     

厌氧颗粒污泥藻酸盐对铜离子的吸附研究

从厌氧颗粒污泥中成功提取出细菌藻酸盐并制备成藻酸钙吸附剂,研究其对水中Cu~(2+)的吸附性能。实验结果表明,接触时间、Cu~(2+)初始浓度和溶液初始pH是影响Cu~(2+)吸附性能的重要因素。吸附等温线研究表明,Langmuir模型比Freundlich模型能更好地描述吸附过程。Cu~(2+)在藻酸钙上的吸附动力学过程可以很好地用Pseudo二级动力学方程来描述。以100 mmol/L HCI为解吸剂,可有效洗脱藻酸钙上95%的Cu~(2+),实现Cu~(2+)的回收。     

CPB改性沸石对磷酸盐的吸附-解吸性能研究

采用溴化十六烷基吡啶(CPB)对天然沸石进行改性,并考察了CPB改性沸石对磷酸盐的吸附-解吸性能。结果表明,CPB改性沸石对磷酸盐具备一定的吸附能力,且吸附行为满足Langmuir等温吸附模型;粒径、改性剂投加量、反应温度、pH值及共存阴离子等因素均会影响CPB改性沸石对磷酸盐的吸附能力;减小粒径和降低反应温度均有利于CPB改性沸石对磷酸盐的吸附去除;粒径≤0.18 mm CPB改性沸石吸附磷酸盐较优的改性剂投加量为250 mmol/kg;当溶液的初始pH值位于4~10之间时CPB改性沸石对磷酸盐的吸附能力随pH值的增加而增强;SO42-的存在会明显降低CPB改性沸石对磷酸盐的吸附效率,而提高溶液的pH值有助于消除SO42-存在对CPB改性沸石吸附磷酸盐的负面影响;HCO3-的存在会一定程度上抑制CPB改性沸石对磷酸盐的吸附去除,而提高溶液的pH值无法消除HCO3-存在对CPB改性沸石吸附磷酸盐的负面影响;CPB改性沸石吸附磷酸盐后一定条件下可以重新解吸出来,且随着解吸液SO42-浓度的增加解吸率明显增大。     

HRT对固定床厌氧反应器运行效果的影响

为了考察水力停留时间(HRT)对炭纤维载体固定床厌氧反应器运行效果的影响,在进水COD分别为20 000~25 000 mg/L和40 000~45 000 mg/L2个浓度范围下,研究了不同HRT对反应器运行效果的影响。结果表明,通过HRT的调整,在达到相同有机负荷(OLR)下,进水COD为20 000~25 000 mg/L的COD去除率和产气量,明显比进水COD为40 000~45 000 mg/L的运行效果好;进水COD为20 000~25 000 mg/L,HRT为14 h,相应的OLR为41.09 kgCOD/(m3.d)时,COD去除率仍然维持在68%以上,沼气容积产气率达到14.55 m3/(m3.d)。炭纤维载体固定床厌氧反应器具有较高的COD去除率、产气效率以及抵抗低pH、高负荷冲击的能力,运行过程中没有发生反应器堵塞的现象。     

新型SBBR处理畜禽废水脱氮实验研究

以畜禽废水为处理对象,将序批式运行模式应用到好氧三相内循环生物流化床中,考察在不同模式下的处理效果及氮的转化情况。实验结果表明,在室温条件下,进水COD浓度为2 000 mg/L左右,总氮为140 mg/L左右时,保持溶解氧在2~2.5 mg/L,交替好氧/缺氧运行方式处理效果优于单一的好氧/缺氧方式;模式为3 h(曝气)-1.5 h(停曝)-1.5 h(曝气)-1 h(停曝)时系统对总氮和氨氮处理效果最好,总氮去除率达到90%,系统主要脱氮方式为同步硝化反硝化和短程硝化反硝化。     

脱硫灰与钾矿石复合生产钾钙硅镁硫肥料研究

对脱硫灰与钾矿石复合生产钾钙硅镁硫肥的研究意义、反应原理、生产流程、环境安全性能以及施肥方法等进行了介绍和评估,并对其应用前景进行了展望。研究结果表明:利用脱硫灰与钾矿石复合生产钾钙硅镁硫肥在理论上可行;生产出的产品中硫酸钾的含量达10.34%～12.0%,枸溶氧化钙19.06%～32.28%,枸溶二氧化硅10.98%～14.46%,枸溶氧化镁1.46%～1.82%。产品的pH值从原脱硫灰的10.65下降到9.60。重金属含量低于农用粉煤灰国家标准,生产过程中不会产生SO2等有害气体污染。肥料的生产成本低于350元/t,该肥料不但可以增加土壤中钾、钙、硅、镁和硫等中微量元素的含量,而且可以提高或改善农作物的产量和品质。达到变废为宝,促进循环经济发展之目的。     

琼脂碳源生物反硝化去除水源水中硝酸盐

针对受硝酸盐污染的水源水,以琼脂为反硝化细菌的碳源和微生物载体,通过生物反硝化作用脱除水源水中的硝酸盐,并利用曝气生物滤池(BAF)去除琼脂反应器出水中残留的少量CODMn和NO2--N等污染物。实验结果表明,水源水自然接种的条件下,可以顺利启动琼脂反应器;在温度为25℃左右,琼脂反应器在进水NO3--N约25 mg/L、水力停留时间1.5 h时,能获得70%的硝酸盐氮去除率;曝气生物滤池在水力停留时间0.5 h、气水比2.8时,可控制最终出水的CODMn和NO2--N分别在5.0 mg/L和0.10 mg/L以下;琼脂反应器的脱氮效果与温度、进水NO3--N浓度及水力停留时间等有关。研究指出,琼脂反应器与曝气生物滤池构成的组合系统能较好地脱除水源水中的硝酸盐并且能控制最终出水水质,不会导致二次污染,从而获得合格的饮用水源水。     

活性炭吸附和脱附-等离子体氧化净化有机废气的研究

根据滑动弧放电等离子体适于降解高浓度有机物废气的特性,结合活性炭吸附法,提出了吸附器的吸附浓缩和热脱附-等离子体氧化净化有机废气的方法。在活性炭吸附过程中,最初2 h内甲苯净化率达到100%,随着时间的增加净化率下降;在热脱附滑动弧放电等离子体净化过程中,甲苯降解效率最高为97.3%。将滑动弧放电等离子体反应器出口气相产物收集进行FT-IR检测,发现放电后有CO2、CO、H2O和NO2产生,并分析了甲苯的降解机理。