Effect of air masses motion on the rapid change of aerosols in marine atmosphere

The impact of air masses motion on marine aerosol properties was investigated using an on-board single particle mass spectrometer(SPAMS) deployed for the determination of single particle size resolved chemical composition over Southeast China Sea. Two aerosol blooms(E1 and E2) were observed during the cruise. High average particle number count occurred in E1(7320), followed by E2(5850), which was more than 100–150 times of the average particle number count during normal periods. Particles were classified as four major sources, including continental source, shipping source, marine source, and transport source based on the mass spectral similarity. Transport source was identified as those particles with high particle number count occurred only during aerosol bloom period. Three sub-types of EC-Ca, OC-Ca, and Al-rich were classified as transport source.EC-Ca was the dominant particles of the transport source, accounting for more than 70%of the total particles in aerosol bloom events. A uni-modal size distribution in the size range of 0.1–2.0 μm was observed during normal period, while a bimodal distribution with a tiny mode(0.3 μm) and a coarse mode between 0.4 and 0.6 μm was present during aerosol bloom. The variation of aerosol source is consistent with air masses back trajectories, for the reason that most of the long-range air trajectories are from the ocean,while short air trajectories originate in the continental regions, which means that air masses have a significant impact on the aerosol physical–chemical properties along their tracks.     

土壤与沉积物中水溶性有机物释放动力学研究

模拟研究了沉积物与草甸沼泽土中水溶性天然有机物从固相向水相释放的动力学过程，探讨了流速、温度和ｐＨ条件对土壤物中水溶性有机物释放速度的影响。研究结果表明，上述过程可以用滞膜模型（单膜）加以描述，释放为典型的一级动力学过程，且草甸沼泽土中水溶性有机物的释放较沉积物快。     

江苏省空气质量预报准确度及改进方法分析

介绍了江苏省重污染天气监测预报预警系统以及大气重污染预警会商流程,将2015年13个地级市的模式预报、人工预报结果分别与实际观测值进行比较。结果表明:人工预报更准确,PM_(2.5)日均值、臭氧日最大8 h平均值、AQI 3个指标人工预报和实况的相关性分别比模式预报高出12.8%、0.3%、11.4%,平均标准误差(MNE)分别低20.7%、3.1%、23.1%。依据国家空气质量预报技术指南评分办法,对各市2015年全年空气质量级别为"良"时进行评分。通过开展07∶00预报更新,使2015年上半年空气质量预报级别得分平均提高了0.9分,全年级别得分平均提高了2.6分;通过改进模式预报参数,使PM_(2.5)日均预报值、臭氧日最大8 h平均预报值、AQI预报值和实际观测值的相关性比上年同期分别提高26.0%、5.0%、33.9%,MNE分别降低3.6%、31.3%、7.6%。     

Fuzzy AHP-based study of cleaner production implementation in Taiwan PWB manufacturer

In recent years, many electronic manufacturing firms have looked upon Cleaner Production (CP) as the means by which they could maintain environmental practice and competitive advantages. CP has been adopted by companies as an important factor in enhancing industrial productivity. Sustainable projects that deal appropriately with environmental and social factors are also more likely to be the most profitable.This paper investigated the criteria and attributes that determine a successful adoption and implementation of CP in reference to PWB manufacture in Taiwan. Fuzzy Analytic Hierarchy Process (FAHP) methodology is used to discuss the different decision criteria that include Organizing, Systems and Technologies, Measurement and Feedback, Working environment and Worker's Culture which are all vital factors in an effective CP implementation. AHP is an efficient tool in controlling the fuzziness of the data involved in choosing the most preferred decision variables. The linguistic level of comparisons produced by the manufacturers and experts are tapped and constructed in a form of triangular fuzzy numbers in order to construct fuzzy pairwise comparison matrices. The implementation of the system is demonstrated by a problem involving three stages of hierarchy which contains different criteria and attributes at a wider perspective within an environmental uncertainty. The findings advocate that these enterprises would need to setup the priorities of the CP implementation. The results suggest a generic hierarchical model of organizations of which the highest level is to be prioritized among the CP implementation factors.     

Recycling thin film transistor liquid crystal display (TFT-LCD) waste glass produced as glass–ceramics

The waste electrical and electronic equipment (WEEE) directives are designed to deal with the rapidly increasing waste stream comprised of electrical and electronic equipment. Recycling electrical and electronic equipment reduces the quantity of waste going to final disposal. The demand for thin film transistor liquid crystal display (TFT-LCD) panels, commonly used in everyday electronic products, is increasing. Conventionally adopted treatments of TFT-LCD waste glass cannot meet WEEE directives. This study adopts the following operating conditions in fabricating glass–ceramics: sintering temperature of 800–950 °C; sintering time of 6 h; and, temperature increase rate of 5 °C/min. The glass–ceramic samples then underwent a series of tests, including the Vickers hardness, water absorption and porosity tests, to determine product quality. The Vickers hardness was 12.1 GPa when fired at 900 °C for 6 h, and density was 2.4 g/cm³ and water absorption was 0%. Thus, TFT-LCD waste glass can be regarded as a good glass–ceramic material.     

六氯苯和重金属复合污染沉积物的电动力学修复研究

以某化工厂排污沟渠中受六氯苯(hexachlorobenzene,HCB)、锌和镍复合污染的实际沉积物为对象,研究非离子表面活性剂OP-10对沉积物中污染物的增溶解吸效果和电动力学修复污染物的强化迁移效果。解吸实验结果表明:OP-10对HCB增溶解吸效果较好,对重金属离子的解吸有一定的促进作用。电动力学修复发现,随电渗析流进入沉积物中的OP-10很快的吸附在靠近阳极沉积物上,从而阻碍了助剂的输送并影响HCB的迁移,而靠近阴极区域沉积物中的有机质迁移会促进HCB的去除。沉积物pH变化引起的重金属沉淀是制约锌迁移的主要因素。镍的整体迁移效果不明显。     

Effectiveness of fluidized pellet bed for removing soluble contaminants

Fluidized pellet bed (FPB) has been successfully applied in water and wastewater treatment. However, the removal mechanism ofcontaminants especially the soluble ones, is still unclear. This study aimed to evaluate the e ectiveness of FPB reactor for removingsoluble contaminants from synthetic wastewater. By only coagulation through jar test operation with addition of polyaluminium chloride(PACl) as primary coagulant and polyacryamide (PAM) as coagulant-aid, the removals of soluble chemical oxygen demand (COD),total phosphorus (TP), and NH4+-N were found to be only 2.2%–7.5%, 5.7%–25.5%, and 9.9%–18.5%, respectively. However, by FPBoperation under the same dosage of coagulants, these values increased to 82.7%, 37.2%, and 50%, indicating that the formation ofpellets in the FPB e ectively enhanced the removal of soluble contaminants. By careful comparison of the settleablility and filterabilityof the pollutants after coagulation, the originally soluble contaminants could be divided into three groups, namely: (1) coagulated-andsettleable,(2) coagulated-but-nonsettleable, and (3) uncoagulable. It was found that not only the first two groups but also a large part ofthe third group could be e ectively removed by FPB operation. However, the mechanism for the removal of the uncoagulable pollutantsby FPB operation still needs further investigation.     

纳米ZnO对嗜热四膜虫的生态毒性研究

为评价纳米ZnO的生态安全性,研究了其对嗜热四膜虫(Tetrahymena thermophila)的水生生态毒性. 显微成像表明,嗜热四膜虫食物泡是摄取纳米ZnO的主要部位. 低ρ(纳米ZnO)对嗜热四膜虫的增殖具有促进作用(即“兴奋反应),其中100 mg/L时促进作用最明显,随着ρ(纳米ZnO)的进一步增加,其对嗜热四膜虫增殖的促进作用逐渐减弱. 随着时间的延长,“兴奋反应逐渐减弱. 纳米ZnO能降低嗜热四膜虫的超氧化物歧化酶活性,且ρ(纳米ZnO)越高,抑制效应越强. 纳米ZnO使嗜热四膜虫自由基清除能力下降,可能是其产生毒害作用的主要原因之一.      

Fenton氧化处理剩余污泥的作用机制

大量集中式城市生活污水处理厂的建设,减轻了水体污染;但是,产生的大量城市污泥的处理处置又成为污水处理面临的另一个瓶颈难题。各种物理、化学、生物等方法被应用于污泥处理,高级氧化技术-Fenton氧化在剩余污泥的处理中逐渐受到研究者的重视。文章重点介绍了Fenton氧化在剩余污泥处理中的作用机制,分析了Fenton氧化处理剩余污泥的主要影响因素;并根据Fenton氧化剩余污泥处理优势,对其今后的应用进行了展望。     

进水模式对SBBR性能及氮形态转化的影响

通过对4种不同进水模式下序批式生物膜反应器(SBBR)的性能、微生物群落结构以及氮形态转化的差异分析, 比较不同进水模式对SBBR性能和氮形态转化的影响及其产生的机制. 结果表明, 分散式进水模式表现出比一次性进水更好的脱氮效率和更高的抗冲击负荷能力, 在达到相同的处理效率的前提下, 分散式进水模式M₄的COD和氨氮负荷最高可达2 540和540 mg·(L·d)^-1, 而一次性进水模式M₁仅能分别达到2 000和420 mg·(L·d)^-1;分散进水模式能降低一次性进水所带来的冲击性负荷, 将负荷均化分散到周期内的各个时段, 同时也减少了进水对微生物的稀释作用, 使得单位体积内有效微生物的数量相对充足, 从而提高反应器的负荷能力. 在分散进水模式下, 从M₄与M₂、M₃的对比来看, 分散模式的进水规律越接近运行模式的循环规律, 反应器的氮素转化效率就越高, 残留的氮素总量也就越低.