大气污染物指纹系统构建及在污染溯源中的应用

基于污染物检测特征信息结合区域产业结构、企业布局等信息构建了大气污染物指纹系统,通过污染物检测特征信息构建的第一级指纹数据库实现了对大气特征污染物的识别和污染物应急处置措施的推送;通过污染源行业及其排放的特征污染物信息构建的第二级指纹数据库实现了产排污行业的溯源;通过企业及其产排污信息,结合气象条件构建的第三级指纹数据库实现了对产排污企业的溯源。基于大气污染物指纹数据库的污染溯源技术为突发环境污染事故中污染物质的识别和污染源的追踪提供了新途径。实际应用验证表明,大气污染物指纹系统污染溯源响应快速、识别精准,实现了大气污染物从监测、溯源到应急处置的全过程无缝衔接。     

山东省农田土壤中拟除虫菊酯类农药污染特征与风险评价

在山东省范围内采集农田表层土壤样品91个,采用气相色谱法分析了7种拟除虫菊酯类农药(SPs)的含量和组成,分析了其分布特征,比较了大田土壤和大棚土壤中该类农药含量的差异,并评价了其生态风险.结果表明,7种拟除虫菊酯类农药总含量(∑_7SPs)范围在0.01—88.51μg·kg~(-1)之间,均值为5.65μg·kg~(-1).与国内其他地区农田土壤相比,山东省农田土壤中拟除虫菊酯含量处于中等偏低水平.山东省各地区的拟除虫菊酯含量存在差异,但组成相近,均是高效氯氟氰菊酯、联苯菊酯和氯氰菊酯的比例较高.部分地区大棚土壤中的含量高于大田土壤.风险评价结果表明,山东省农田土壤个别采样点中甲氰菊酯和高效氯氟氰菊酯具有生态风险,三分之一的采样点存在潜在生态风险,其余采样点不存在生态风险.     

生物材料治理镉污染研究进展

近年来,生物材料以其经济、有效和无二次污染等特点,在重金属废水处理和土壤修复方面显示出了众多的优势·可替代传统的镉污染处理方法.综述了目前国内外生物材料在处理镉污染方面的研究进展,并对今后应用生物材料治理镉污染提出了一些建议.     

Discrete-choice experiments valuing local environmental impacts of renewables: two approaches to a case study in Portugal

Despite the often mentioned environmental benefits associated with transition from fossil fuels to renewable energy sources, their use for electricity production has non-negligible negative environmental impacts. The most commonly mentioned in surveys concern different types of landscape impacts, impacts on the fauna and flora, and noise. These impacts differ by size and location of plants, and by source of energy, rendering the policy decision complex. In addition, there are other welfare issues to take into consideration, as positive and negative environmental impacts are not evenly distributed among population groups. This paper proposes to compare the welfare impacts of renewable energy sources controlling for the type of renewable as well as the specific environmental impact by source. To this end, two discrete-choice experiments are designed and applied to a national sample of the Portuguese population. In one case, only individual negative impacts of renewables are used, and in another case, the negative impacts interact with a specific source. Results show the robustness of discrete-choice experiments as a method to estimate the welfare change induced by the impacts of renewable energy sources. Overall, respondents are willing to pay to reduce the environmental impacts, thus making compensation for local impacts feasible. Moreover, the estimations reveal that respondents are significantly sensitive to the detrimental environmental effects of specific renewable energy sources, being willing to pay more to use these sources of energy relative to others.     

Formation of persistent chlorinated aromatic compounds in simulated and real fly ash from iron ore sintering

Effects of carbon concentration and Cu additive in simulated fly ash (SFA) and real fly ash (RFA) on the formation of polychlorinated dibenzofurans (PCDFs), polychlorinated dibenzo-p-dioxins (PCDDs), chlorobenzenes, and polychlorinated biphenyls which were all regarded as persistent chlorinated aromatics in iron ore sintering were investigated. In the annealing process of SFA with various carbon contents, the yield of chlorinated aromatics and the I-TEQ obtained their maximum at 10 wt% carbon content. Active carbon in SFA acted as the carbon source as well as an adsorbent which led to higher production of PCDD/F in solid phase at 10 wt% carbon content. The increase of carbon content will be beneficial on the formation of 2,3,7,8-Chloro-substituted PCDF compared with 2,3,7,8-Chloro-substituted PCDD. In addition, the CuCl₂·2H₂O was a much more powerful catalyst in the formation of chlorinated aromatic compounds compared with elementary Cu, since it served as both a catalyst and a chlorine donor. However, the RFA behaved similarly with SFA with elementary Cu in the formation of chlorinated aromatic compounds. The effect of carbon content and copper additives on formation of 2,3,7,8-chloro-substituted congeners displayed similar characteristics with the tetra- to octa-PCDD/F isomers and even the total PCDD/Fs.     

陕北能源化工基地某工业园区水污染物排放总量控制研究

基于水污染物总量控制思路,以陕北能源化工基地某工业园区为研究对象,分析工业园区主要水环境问题及原因,分别对园区企业和集中污水处理厂提出排水水量、水质控制要求,从工程技术措施和管理手段上提出了明确的解决方案和要求。结果表明,各项减排措施实施后,COD、氨氮、石油类物质分别削减49.4%、71.0%、72.6%,园区排水总量控制在1.18万t/d,最终保证园区水污染物总量控制目标的实现。     

北京市建筑废弃物资源化利用研究与项目示范

针对北京市建筑废弃物产量大、资源化利用率低的问题,分析了北京市建筑废弃物的来源、产量、组分及处理现状,阐述了建筑废弃物资源化利用途径和资源化利用工艺,介绍了朝阳区建筑废弃物资源化示范项目建设情况,给出了北京市建筑废弃物资源化利用设施建设合理建议。     

Development of a composite line source emission model for traffic interrupted microenvironments and its application in particle number emissions at a bus station

A composite line source emission (CLSE) model was developed to specifically quantify exposure levels and describe the spatial variability of vehicle emissions in traffic interrupted microenvironments. This model took into account the complexity of vehicle movements in the queue, as well as different emission rates relevant to various driving conditions (cruise, decelerate, idle and accelerate), and it utilised multi-representative segments to capture the accurate emission distribution for real vehicle flow. Hence, this model was able to quickly quantify the time spent in each segment within the considered zone, as well as the composition and position of the requisite segments based on the vehicle fleet information, which not only helped to quantify the enhanced emissions at critical locations, but it also helped to define the emission source distribution of the disrupted steady flow for further dispersion modelling. The model then was applied to estimate particle number emissions at a bi-directional bus station used by diesel and compressed natural gas fuelled buses. It was found that the acceleration distance was of critical importance when estimating particle number emission, since the highest emissions occurred in sections where most of the buses were accelerating and no significant increases were observed at locations where they idled. It was also shown that emissions at the front end of the platform were 43 times greater than at the rear of the platform. Although the CLSE model is intended to be applied in traffic management and transport analysis systems for the evaluation of exposure, as well as the simulation of vehicle emissions in traffic interrupted microenvironments, the bus station model can also be used for the input of initial source definitions in future dispersion models.     

Phosphine in paddy fields and the effects of environmental factors

Ambient levels of phosphine (PH₃) in the air, phosphine emission fluxes from paddy fields and rice plants, and the distribution of matrix-bound phosphine (MBP) in paddy soils were investigated throughout the growing stages of rice. The relationships between MBP and environmental factors were analyzed to identify the principal factors determining the distribution of MBP. The phosphine ambient levels ranged from 2.368 ± 0.6060 ng m⁻³ to 24.83 ± 6.529 ng m⁻³ and averaged 14.25 ± 4.547 ng m⁻³. The highest phosphine emission flux was 22.54 ± 3.897 ng (m² h)⁻¹, the lowest flux was 7.64 ± 4.83 ng (m² h)⁻¹, and the average flux was 14.17 ± 4.977 ng (m² h)⁻¹. Rice plants transport a significant portion of the phosphine emitted from the paddy fields. The highest contribution rate of rice plants to the phosphine emission fluxes reached 73.73% and the average contribution was 43.00%. The average MBP content of 111.6 ng kg⁻¹fluctuated significantly in different stages of rice growth and initially increased then decreased with increasing depth. The peak MBP content in each growth stage occurred approximately 10 cm under the surface of paddy soils. Pearson correlation analyses and stepwise multiple regression analysis showed that soil temperature (Ts), acid phosphatase (ACP) and total phosphorus (TP) were the principal environmental factors, with correlative rankings of Ts > ACP > TP.     

采用数值风洞模型对热电厂烟塔合一大气污染扩散的研究

随着城市的快速建设,城市建筑的高度和体量不断增加,同时大气污染源的排放方式和排放状态也与从前发生了很大的变化,特别是热电厂采用烟塔合一排放方式的出现,对常规应用的稳态远距离以统计学为基础理论的高斯大气预测方法提出了挑战。目前国内外广泛使用的大气污染物预测模式——德国模式在烟塔合一排放方式的预测上存在着许多关键性问题,如大风下洗条件下,冷却塔附近空腔区的大小和范围、空腔区污染物最高地面浓度等无法给出准确的预测结果。为准确预测烟塔合一排放方式的大气污染物扩散情况,采用一种新的大气污染物扩散的预测模式——数值风洞模型进行模拟预测研究,预测结果表明,在烟塔合一排放方式下,大气污染物最高地面浓度随风速增加而增加,同时在冷却塔下风向存在负压区,污染物在该区域高浓度聚集。且在夏季6.0m/s风速下,冷却塔下风向最高地面浓度出现峰值,属于最不利的气象条件。数值风洞模型可利用图形化手段实现对空腔区产生、变化、破碎至再生成的全过程描述,从而建立了一种大气污染预测的重要手段。