Hierarchical Ag-SiO2@Fe3O4 magnetic composites for elemental mercury removal from non-ferrous metal smelting flue gas

Hierarchical Ag-SiO_2@Fe_3O_4 magnetic composites were selected for elemental mercury(Hg~0) removal from non-ferrous metal smelting flue gas in this study. Results showed that the hierarchical Ag-SiO_2@Fe_3O_4 magnetic composites had favorable Hg~0 removal ability at low temperature. Moreover, the adsorption capacity of hierarchical magnetic composite is much larger than that of pure Fe_3O_4 and SiO_2@Fe_3O_4. The Hg~0 removal efficiency reached the highest value as approximately 92% under the reaction temperature of 150°C, while the removal efficiency sharply reduced in the absence of O_2. The characterization results indicated that Ag nanoparticles grew on the surface of SiO_2@Fe_3O_4 support. The large surface area of SiO_2 supplied efficient reaction room for Hg and Ag atoms. Ag–Hg amalgam is generated on the surface of the composites. In addition, this magnetic material could be easily separated from fly ashes when adopted for treating real flue gas, and the spent materials could be regenerated using a simple thermal-desorption method.     

Volatile organic compounds concentration profiles and control strategy in container manufacturing industry: Case studies in China

Volatile organic compounds (VOCs), important precursors of ozone (O₃) and fine particulate matter (PM_2.5), are the key to curb the momentum of O₃ growth and further reducing PM_2.5 in China. Container manufacturing industry is one of the major VOC emitters, and more than 96% containers of the world are produced in China, with the annual usage of coatings of over 200,000 tons in recent years. This is the first research on the emission characteristics of VOCs in Chinese container manufacturing industry, including concentration and ozone formation potential (OFP) of each species. The result shows that the largest amounts of VOCs are emitted during the pretreatment process, followed by the paint mixing process and primer painting process, and finally other sprays process. The average VOC concentrations in the workshops, the exhausts before treatment and the exhausts after treatment are ranging from 82.67–797.46 , 170–1,812.65 , 66.20–349.63 mg/m³, respectively. Benzenes, alcohols and ethers are main species, which contribute more than 90% OFP together. Based on the emission characteristics of VOCs and the technical feasibility, it is recommended to set the emission limit in standard of benzene to 1.0 mg/m³, toluene to 10 mg/m³, xylene to 20 mg/m³, benzenes to 40 mg/m³, alcohols and ethers to 50 mg/m³, and VOCs to 100 mg/m³. The study reports the industry emission characteristics and discusses the standard limits, which is a powerful support to promote VOCs emission reduction, and to promote the coordinated control of PM_2.5 and O₃ pollution.     

Influence of drying and calcination temperatures for Ce-Cu-Al trimetallic composite catalyst on simultaneous removal H2S and PH3: Experimental and DFT studies

This work explored the influences of the drying and calcination temperatures on a Ce-Cu-Al trimetallic composite catalyst for the simultaneous removal of H₂S and PH₃. The effects of both temperatures on the structural features and activity were examined. The density functional theory method was used to calculate adsorption energies and further analyze their adsorption behavior on different slabs. Experiments revealed suitable drying and calcination temperatures to be 60 and 500°C, respectively. The capacity reached 323.8 and 288.1 mg/g. Adjusting drying temperature to 60°C is more inclined to form larger and structured grains of CuO. Rising calcinating temperature to 500°C could increase the grain size and redox capacity of CuO to promote performance. Higher temperatures would destroy the surface structure and lead to a crystal phase transformation, which was that the CuO and Al₂O₃ were gradually recombined into CuAl₂O₄ with a spinel structure. The exposed crystal planes of surficial CuO and CuAl₂O₄ were determined according to characterization results. Calculation results showed that, compared with CuO (111), H₂S and PH₃ have weaker adsorption strength on CuAl₂O₄ (100) which is not conducive to their adsorption and removal.     

石化企业气体泄漏红外成像检测技术研究进展

介绍了气体泄漏红外成像检测技术的工作原理和分类,综述了国内外相关单位的研究进展,重点分析了国外公司对被动式红外成像检测技术的研究情况,并对技术的发展方向进行了展望。     

Purification, characterization and application of dual coagulants containing chitosan and different Al species in coagulation and ultrafiltration process

The objective of this study was to investigate the effect of different Al species and chitosan (CS) dosages on coagulation performance, floc characteristics (floc sizes, strength and regrowth ability and fractal dimension) and membrane resistance in a coagulation–ultrafiltration hybrid process. Results showed that different Al species combined with humic acid in diverse ways. Al_a had better removal efficiency, as determined by UV₂₅₄ and dissolved organic carbon, which could be further improved by the addition of CS. In addition, the optimal dosage of different Al species was determined to be 4.0 mg/L with the CS concentration of 1.0 mg/L, by orthogonal coagulation experiments. Combining Al_a/Al_b/Al_c with CS resulted in larger flocs, higher recovery, and higher fractal dimension values corresponding to denser flocs; in particular, the floc size at the steady state stage was four times larger than that obtained with Al species coagulants alone. The results of ultrafiltration experiments indicated that the external fouling percentage was significantly higher than that of internal fouling, at around 85% and 15%, respectively. In addition, the total membrane resistance was significantly decreased due to CS addition.     

Polytitanium sulfate (PTS): Coagulation application and Ti species detection

Interest in the development of inorganic polymerized coagulants is growing; however, there are only limited studies on the synthesis of polytitanium coagulants, which are expected to exhibit improved coagulation efficiency with better floc properties. This study presents the synthesis of polytitanium sulfate (PTS) for potential application in water purification, followed by characterization of PTS flocs and titanium species detection. Stable PTS solutions were successfully synthesized and standard jar tests were conducted to evaluate their coagulation efficiency. Electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) speciation analysis revealed that a variety of mononuclear and polynuclear complexes were formed in PTS solution, indicating the polymeric nature of the synthesized coagulant. Floc characteristics were studied through on-line monitoring of floc size using a laser diffraction particle size analyzer. Results showed that PTS had a comparable or in some cases even higher organic matter and particulate removal efficiency than Ti(SO₄)₂. The effluent pH after PTS coagulation significantly improved toward desirable values closer to neutral pH. Properties of flocs formed by PTS were significantly improved in terms of floc size, growth rate and structure. This study showed that PTS could be an efficient and promising coagulant for water purification, with the additional benefit that its coagulated sludge can be used to recover valuable TiO₂ nanoparticles for various commercial applications.     

A case study of development and application of a streamlined control and response modeling system for PM2.5 attainment assessment in China

This article describes the development and application of a streamlined air control and response modeling system with a novel response surface modeling-linear coupled fitting method and a new module to provide streamlined model data for PM_(2.5) attainment assessment in China.This method is capable of significantly reducing the dimensions required to establish a response surface model,as well as capturing more realistic response of PM_(2.5) to emission changes with a limited number of model simulations.The newly developed module establishes a data link between the system and the Software for Model Attainment Test—Community Edition(SMAT-CE),and has the ability to rapidly provide model responses to emission control scenarios for SMAT-CE using a simple interface.The performance of this streamlined system is demonstrated through a case study of the Yangtze River Delta(YRD) in China.Our results show that this system is capable of reproducing the Community Multi-Scale Air Quality(CMAQ) model simulation results with maximum mean normalized error 3.5%.It is also demonstrated that primary emissions make a major contribution to ambient levels of PM_(2.5) in January and August(e.g.,more than50%contributed by primary emissions in Shanghai),and Shanghai needs to have regional emission control both locally and in its neighboring provinces to meet China's annual PM_(2.5)National Ambient Air Quality Standard.The streamlined system provides a real-time control/response assessment to identify the contributions of major emission sources to ambient PM_(2.5)(and potentially O_3 as well) and streamline air quality data for SMAT-CE to perform attainment assessments.     

离子色谱法测定烟气中的尘态氟

建立了一种简便、快速测定废气中尘态氟的离子色谱分析方法。用滤筒采集样品,以碳酸钠-碳酸氢钠混合液为淋洗液,用离子色谱进行样品分离,面积外标法定量。分析结果表明,该方法操作简便、离子色谱条件的线性理想,测定结果的回收率、精密度和准确度较高。适用于污染源废气尘态氟的测定。     

TGXC—2除尘净化器在工业锅炉改造中的应用

文章介绍了ＴＧＸＣ－２除尘净化器在工业锅炉改造中的应用情况，安装该除尘器之后，达到了消烟除尘，除硫双轻重功能的理想效果，使烟气黑度，除尘效率，脱硫效率均达标。     

某炼化企业催化汽油吸附脱硫装置职业病危害控制效果评价

通过资料调研、现场调查与检测,将获取的资料与法律、法规和标准要求相比较,对某炼化企业催化汽油吸附脱硫装置进行了职业病危害控制效果评价。