工艺安全管理系统的核心要素——工艺危害分析

介绍了国际上对工艺危害分析的有关规定,总结了工艺危害分析的方法及应用,重点介绍了工艺危害分析中HAZOP方法的应用,列举了工艺危害分析实例,为做好工艺危害分析与控制工作提供借鉴。     

粉煤灰在改良土壤中的应用研究

摘要：粉煤灰的颗粒组成以微细的玻璃体为主,其颗粒组成决定了粉煤灰可用作土壤改良剂。但由于单一废弃物的营养元素常不平衡或物理性质不够理想,单独用于土壤中容易造成一些负面影响,故采用粉煤灰和有机固体废弃物配施,为植物生长提供更充分的营养物质和能量。     

水中重金属在线监测技术发展概述

近年来重金属污染事件层出不穷,重金属污染的监测已经成为国家和人民关注的重点问题。介绍了水中重金属在线监测仪器的主要应用技术,并指出技术的适用范围和优劣点,同时对水质重金属在线监测仪的发展前景提出几点意见。     

西泉眼水库富营养化状况的研究

通过对西采眼水库水质进行调查分析,综合不同水期的监测数据得出分析结果：西泉眼水库的TIL（∑）值在40—60之间,表明水库水质污染介于中营养与轻度富营养之间。     

云对太阳紫外辐射的影响

云对到达地面的太阳紫外辐射有着重要的影响,根据在香河综合观测站１年的观测资料,利用相关分析,得到了计算云天条件下太阳紫外总辐射的一种经验公式,计算结果比较令人满意。对阴天太阳紫外总辐射的减弱作了简单的分析。     

定量构效关系(QSAR)在环境化学中的进展与方法

定量构效关系(QSAR)是化学品安全评价中有用的工具之一。本文叙述它的应用背景、基本原理、学科历史进展、概念模型、数学模型和算法,着重介绍作者开发的实用量子化学计算程序包,用以产生分子结构参数,所建立的化学物质毒性数据库可用来获取大量生物活性数据,还可用模式识别程序包构筑构效定量关系。本文对其研究前景也作了叙述。     

受体模型在大气颗粒物源解析中的应用和进展

综述用于大气颗粒物研究的受体模型在国内外的发展概况。对受体模型与扩散模型的特点,常用受体模型的技术内容,受体模型在城区尺度、区域尺度和全球尺度颗粒物源解析研究中的应用作了详细阐述。介绍了受体模型研究的一些热点问题,提出当前应开展的主要研究课题。     

等离子体分解SO2实验

介绍了在低温常压条件下,应用等离子体分解有害气体ＳＯ２的实验结果,通过实验总结出ＳＯ２浓度,气体流量以及烟气温度ＳＯ２分解率的影响规律,比较了脉冲叠加正、负直流电压产生的等离子体分解ＳＯ２的能耗和分解量。实验结果表明,该项技术耗能低,ＳＯ２分解率高。每消耗１ｋＷ·ｈ电能可分解１．６１－１．９７ｋｇＳＯ２气体,分解率达８０％以上。     

Influence of cation type, ionic strength, and pH on solubilization and mobilization of residual hydrocarbon by a biosurfactant

This study investigated the effect of cation type, ionic strength, and pH on the performance of an anionic monorhamnolipid biosurfactant for solubilization and removal of residual hexadecane from sand. Three common soil cations, Na⁺, Mg²⁺, and Ca²⁺, were used in these experiments and hexadecane was chosen to represent a nonaqueous phase liquid (NAPL) less dense than water. Results showed that hexadecane solubility in rhamnolipid solution was significantly increased by the addition of Na⁺ and Mg²⁺. Addition of up to 0.2 mM Ca²⁺ also increased hexadecane solubility. For Ca²⁺ concentrations greater than 0.2 mM there was little effect on hexadecane solubility due to competing effects of calcium-induced rhamnolipid precipitation and enhanced hexadecane solubilization. Efficiency of NAPL solubilization can be expressed in terms of molar solubilization ratios (MSR). The results showed that MSR values for hexadecane in rhamnolipid solutions increased 7.5-fold in the presence of 500 mM Na⁺, and 25-fold in the presence of 1 mM Mg²⁺. The presence of cations also reduced the interfacial tension between rhamnolipid solutions and hexadecane. For example, an increase in Na⁺ from 0 to 800 mM caused a decrease in interfacial tension from 2.2 to 0.89 dyn cm⁻¹. Similarly, decreasing pH caused a reduction in interfacial tension. The lowest interfacial tension value observed in this study was 0.02 dyn cm⁻¹ at pH 6 in the presence of 320 mM Na⁺. These conditions were also found to be optimal for removal of hexadecane residual from sand columns, with 58% of residual removed within three pore volumes. The removal of residual NAPL from the packed columns was primarily by mobilization, even though solubilization was significantly increased in the presence of Na⁺.     

煤矿危险源分类分级与预警

关于危险源概念目前尚无准确的理论界定,为此,笔者试图阐明危险源分为固有型危险源和触发型危险源的新观点,提出并说明了对不同类型危险源应采用的不同的辩识与分级方法。在此基础上,结合企业实际,提出了危险源预警思想和模块设计方法。所有这些,对完善安全管理理论,提高煤矿安全管理水平具有理论意义和实用价值