Chemical mass balance source apportionment for combined PM2.5 measurements from U.S. non-urban and urban long-term networks

The Minnesota Particulate Matter 2.5 (PM_2.5) Source Apportionment Study was undertaken to explore the utility of PM_2.5 mass, element, ion, and carbon measurements from long-term speciation networks for pollution source attribution. Ambient monitoring data at eight sites across the state were retrieved from the archives of the Interagency Monitoring of Protected Visual Environments (IMPROVE) and the Speciation Trends Network (STN; part of the Chemical Speciation Network [CSN]) and analyzed by an Effective Variance – Chemical Mass Balance (EV-CMB) receptor model with region-specific geological source profiles developed in this study. PM_2.5 was apportioned into contributions of fugitive soil dust, calcium-rich dust, taconite (low grade iron ore) dust, road salt, motor vehicle exhaust, biomass burning, coal-fired utility, and secondary aerosol. Secondary sulfate and nitrate contributed strongly (49–71% of PM_2.5) across all sites and was dominant (≥60%) at IMPROVE sites. Vehicle exhausts accounted for 20–70% of the primary PM_2.5 contribution, largely exceeding the proportion in the primary PM_2.5 emission inventory. The diesel exhaust contribution was separable from the gasoline engine exhaust contribution at the STN sites. Higher detection limits for several marker elements in the STN resulted in non-detectable coal-fired boiler contributions which were detected in the IMPROVE data. Despite the different measured variables, analytical methods, and detection limits, EV-CMB results from a nearby IMPROVE-STN non-urban/urban sites showed similar contributions from regional sources – including fugitive dust and secondary aerosol. Seasonal variations of source contributions were examined and extreme PM_2.5 episodes were explained by both local and regional pollution events.     

Modeling effects of traffic and landscape characteristics on ambient nitrogen dioxide levels in Connecticut

An integrated exposure model was developed that estimates nitrogen dioxide (NO(2)) concentration at residences using geographic information systems (GIS) and variables derived within residential buffers representing traffic volume and landscape characteristics including land use, population density and elevation. Multiple measurements of NO(2) taken outside of 985 residences in Connecticut were used to develop the model. A second set of 120 outdoor NO(2) measurements as well as cross-validation were used to validate the model. The model suggests that approximately 67% of the variation in NO(2) levels can be explained by: traffic and land use primarily within 2 km of a residence; population density; elevation; and time of year. Potential benefits of this model for health effects research include improved spatial estimations of traffic-related pollutant exposure and reduced need for extensive pollutant measurements. The model, which could be calibrated and applied in areas other than Connecticut, has importance as a tool for exposure estimation in epidemiological studies of traffic-related air pollution.     

Forest plantations, water availability, and regional climate change: controversies surrounding Acacia mearnsii plantations in the upper Palnis Hills, southern India

Plantation forests not only impact carbon and water cycles, but also affect biodiversity, livelihoods, and shape regional economies. Each of these impacts differs across varying scales of analysis. This paper illustrates how forest, climate change and hydrology debates play out in the context of the forest plantations of Australian black wattle (Acacia mearnsii) in the upper Palni hills of southern India. We outline the contradictory perspectives of different local groups regarding the impact of plantations on catchment hydrology and water availability, and examine these in relation to changes in the regional economy and rainfall patterns. Our analysis indicates that changes in these two factors have played a more significant role than existing wattle plantations in affecting local and regional water availability. We suggest that ongoing debates regarding forest plantation–hydrology–climate change relationships need to broaden their scope to include changes in regional rainfall patterns and shifts in regional economic activity. This approach is likely to provide a more realistic assessment of plantation forests in a dynamic regional context, and offer more resilient strategies for regional landscape and catchment management under conditions of high variability in rainfall patterns.     

Relative Importance of School Bus-Related Microenvironments to Children’s Pollutant Exposure

Abstract

Real‐time concentrations of black carbon, particle‐bound polycyclic aromatic hydrocarbons, nitrogen dioxide, and fine particulate counts, as well as integrated and real‐time fine particulate matter (PM_2.5) mass concentrations were measured inside school buses during long commutes on Los Angeles Unified School District bus routes, at bus stops along the routes, at the bus loading/unloading zone in front of the selected school, and at nearby urban “background” sites. Across all of the pollutants, mean concentrations during bus commutes were higher than in any other microenvironment. Mean exposures (mean concentration times time spent in a particular microenvironment) in bus commutes were between 50 and 200 times greater than those for the loading/unloading microenvironment, and 20–40 times higher than those for the bus stops, depending on the pollutant. Although the analyzed school bus commutes represented only 10% of a child’s day, on average they contributed one‐third of a child’s 24‐hr overall black carbon exposure during a school day. For species closely related to vehicle exhaust, the within‐cabin exposures were generally dominated by the effect of surrounding traffic when windows were open and by the bus’s own exhaust when windows were closed. Low‐emitting buses generally exhibited high concentrations only when traveling behind a diesel vehicle, whereas high‐emitting buses exhibited high concentrations both when following other diesel vehicles and when idling without another diesel vehicle in front of the bus. To reduce school bus commute exposures, we recommend minimizing commute times, avoiding caravanning with other school buses, using the cleanest buses for the longest bus routes, maintaining conventional diesel buses to eliminate visible emissions, and transitioning to cleaner fuels and advanced particulate control technologies as soon as possible.     

Reductive debromination of nonabrominated diphenyl ethers by sodium borohydride and identification of octabrominated diphenyl ether products

A method was developed to study reductive transformation of highly brominated diphenyl ethers (BDEs). The method development is a part of a broader project where it will be used to determine the susceptibility of environmental pollutants to reductive conditions, in an attempt to create a scheme for determination of chemical’s persistence. This paper focuses on identification of octabrominated diphenyl ether transformation products from reductive debromination of the three nonabrominated diphenyl congeners (nonaBDE), BDE-206, -207 and -208. Sodium borohydride was used to explore the reductive debromination of the nonaBDEs. The transformation products were collected at two time-points and identified products were quantified by GC-MS. The reduction of the nonaBDEs lead primarily to debrominated products, mainly octaBDEs. The three nonabrominated DEs gave isomer-related transformation product patterns. BDE-207 and BDE-208 showed a propensity for ortho-debromination in the initial reaction step, while no discrimination between initial debromination positions was seen for BDE-206. All three nonabrominated DEs displayed a preferred initial debromination on the fully brominated DE ring.     

Pollutants and the health of green sea turtles resident to an urbanized estuary in San Diego, CA

Rapid expansion of coastal anthropogenic development means that critical foraging and developmental habitats often occur near highly polluted and urbanized environments. Although coastal contamination is widespread, the impact this has on long-lived vertebrates like the green turtle (Chelonia mydas) is unclear because traditional experimental methods cannot be applied. We coupled minimally invasive sampling techniques with health assessments to quantify contaminant patterns in a population of green turtles resident to San Diego Bay, CA, a highly urbanized and contaminated estuary. Several chemicals were correlated with turtle size, suggesting possible differences in physiological processes or habitat utilization between life stages. With the exception of mercury, higher concentrations of carapace metals as well as 4,4′-dichlorodiphenyldichloroethylene (DDE) and γ chlordane in blood plasma relative to other sea turtle studies raises important questions about the chemical risks to turtles resident to San Diego Bay. Mercury concentrations exceeded immune function no-effects thresholds and increased carapace metal loads were correlated with higher levels of multiple health markers. These results indicate immunological and physiological effects studies are needed in this population. Our results give insight into the potential conservation risk contaminants pose to sea turtles inhabiting this contaminated coastal habitat, and highlight the need to better manage and mitigate contaminant exposure in San Diego Bay.     

Peroxidase-mediated removal of endocrine disrupting compound mixtures from water

Several classes of oxidative enzymes have shown promise for efficient removal of endocrine disrupting compounds (EDCs) that are resistant to conventional wastewater treatments. Although the kinetics of reactions between individual EDCs and selected oxidative enzymes are well documented in the literature, there has been little investigation of reactions with EDC mixtures. This makes it impossible to predict how enzyme-mediated treatment systems will perform since wastewater effluents generally contain multiple EDCs. This paper reports pseudo-first order rate constants for a model oxidative enzyme, horseradish peroxidase (HRP), during single-substrate (k₁) and mixed-substrate (k_1-MIX) reactions. Measured values are compared with literature values of three Michaelis-Menten parameters: half-saturation constant (K_M), enzyme turnover number (k_CAT), and the ratio k_CAT/K_M. Published reports had suggested that each of these could be correlated with HRP reactivity towards EDCs in mixtures, and empirical results from this study show that K_M can be used to predict the sequence of EDC removal reactions within a particular mixture. We also observed that k_1-MIX values were generally greater than k₁ values and that compounds exhibiting greatest estrogenic toxicities reacted most rapidly in a given mixture. Finally, because K_M may be tedious to measure for every EDC of interest, we have constructed a quantitative structure-activity relationship (QSAR) model to predict these values. This model predicts K_M quite accurately (R² = 89%) based on two molecular characteristics: molecular volume and hydration energy. Its accuracy makes this QSAR a useful tool for predicting which EDCs will be removed most efficiently during enzyme treatment of EDC mixtures.     

Characterisation and fingerprinting of PCBs in flue gas and ash from waste incineration and in technical mixtures

Congener patterns of mono- to deca-chlorinated biphenyls (PC1-10B) were evaluated in (a) waste incineration flue gases collected in the post-combustion zone of a laboratory-scale fluidized-bed reactor, (b) ashes from two different MSW incineration plants, and (c) published data of eight Aroclor formulations. The congener patterns of the flue gases, ashes, and Aroclor mixtures clearly differed from each other, likely reflecting differences in formation pathways. The flue gas congener patterns were largely dominated by the least chlorinated congeners, whereas the ashes displayed more evenly distributed patterns. The most abundant congeners indicated a preference for 3,3',4,4'-oriented substitution, which may be related to de novo-type formation involving perylene. Principal component analysis confirmed that congener patterns differed among the three matrices and also distinguished flue gases collected at 200 °C from those collected at 300 °C and 450 °C. This distinction could be partly explained by the degree of chlorination, although the substitution status of the ortho-position, and substitution in the 3,3',4,4'-positions also seemed to be influential. Injecting biphenyl into the post-combustion zone of the reactor did not alter the patterns, indicating that availability of the backbone structure is not a limiting factor for PCB formation.