Development and pilot testing of an assessment battery for older drivers

INTRODUCTION: The purpose of the study reported here was to develop and pilot test a comprehensive battery of assessment instruments for older drivers that would be inexpensive and easy to administer so that it could be used in longitudinal studies. METHOD: The resulting battery was developed by selecting a set of validated assessment instruments and combining them into a package, with a total acquisition cost of less than $900. As part of this battery, three questionnaires were developed utilizing items from established questionnaires with minor modifications. The battery was pilot tested with a convenience sample of 38 drivers aged 65 years or older. RESULTS: Results showed that the entire battery required less than one hour to complete. Data from the assessment outcomes fell within normative ranges. Feedback from subjects indicated that the battery was acceptable, free of problems, presented tasks in a good order, and was not too long. CONCLUSIONS: Based on study findings, the assessment battery appeared to be low-cost, transportable, easy to administer, easy for subjects to complete, provides a comprehensive assessment of a person's physical health, mental health, and driving behaviors, and would serve as a valuable data collection tool for a longitudinal study of older drivers. Such a longitudinal study is needed in order to answer some of the most important questions about older driver safety and mobility.     

Roost type influences torpor use by Australian owlet-nightjars

Australian owlet-nightjars (Aegotheles cristatus; ～50?g) are one of only a few avian species that roost in cavities year-round and regularly enter torpor. Cavity roosts act as thermal buffers, and roost type likely affects energy expenditure of small birds. We used radiotelemetry to locate diurnal winter roost sites of owlet-nightjars in central Australia and to measure body (T (b)) and skin (T (skin)) temperature. We also recorded ambient temperature inside (T (IN)) and outside roosts. Individual owlet-nightjars used one to seven different roosts (tracking time 3-10?weeks), selecting either rock crevices (four birds) or tree hollows (four birds), or switching between the two roost types (seven birds). Rock crevices (T (IN) +9°C to +33°C) were warmer and thermally more stable than tree hollows (T (IN) -4.0°C to +37°C). Torpor, often expressed by a reduction of T (skin)/T (b) by >10°C for 3-4?h at dawn, was influenced by roost selection; torpor use in tree hollows was almost twice that in rock crevices. Despite the potential energy savings accrued from roosting in well-insulated cavities, owlet-nightjars roosted in tree hollows more often (65% bird days, n?=?398) than in rock crevices (35% bird days, n?=?211). Lower costs of arousal from torpor via passive rewarming and basking and decreased risk of predation are two possible explanations for the preference to roost in tree hollows. We provide the first evidence for the influence of cavity roost selection on torpor use in a free-ranging bird and show that roost selection and thermal biology are strongly interrelated in determining energy expenditure.     

A survey of parabens in aquatic environments in Hanoi,Vietnam and its implications for human exposure and ecological risk

Environmental Science and Pollution Research - Seven parabens including methylparaben (MeP), ethylparaben (EtP), propylparaben (PrP), iso-propylparaben (iPrP), butylparaben (BuP), benzylparaben...     

Towards an agile participatory urban soundscape planning framework

This paper presents an agile participatory urban soundscape planning process model, which is proposed as a prerequisite on which to build and reference the efficacy of urban soundscape planning. The model was developed through data synthesis and analysis and mapping engagement with diverse stakeholders across four applied soundscape projects in Brighton and Hove, UK. To the best of the authors’ knowledge, the model is the first of its kind in applied soundscape practice. The data was collected through semi-structured interviews with key stakeholders and document analysis of published resources. The framework used for the analysis of the findings comprised four core urban planning stages: goals and objectives, engagement (e.g. prediction/modelling/design/planning), implications, evaluation. The study found that when integrating soundscape planning with core urban planning stages it was necessary to first identify the appropriate stakeholders in relation to the project context. It was found that these stakeholders could be wide-ranging and unexpected, thereby reinforcing the appropriateness of incorporating an agile approach in the resulting model. The study also found that users’ perceptions are central to soundscape practice and need to be considered at each stage of a planning process to produce an effective and sustainable outcome. A variety of specific events, appropriate to the requirements of the stakeholders, are important for engaging planning authorities, users and other stakeholders at different stages. This study also demonstrated that an evidence-based evaluation method is recommended in an agile participatory urban soundscape planning process to assess stakeholders’ engagement at each stage and to inform and guide subsequent steps in the planning process relevant to the local context(s).     

Nitrogen Removal by Stormwater Management Structures: A Data Synthesis

A comprehensive synthesis of data from empirically based published studies and a widely used stormwater best management practice (BMP) database were used to assess the variability in nitrogen (N) removal performance of urban stormwater ponds, wetlands, and swales and to identify factors that may explain this variability. While the data suggest that BMPs were generally effective on average, removal efficiencies of ammonium (NH₄), nitrate (NO₃), and total nitrogen (TN) were highly variable ranging from negative (i.e., BMPs acting as sources of N) to 100%. For example, removal of NO₃ varied from (median ±1 SD) ?15 ± 49% for dry ponds, 32 ± 120% for wet ponds, 58 ± 210% for wetlands, and 37 ± 29% for swales. Across the same BMP types, TN removal was 27 ± 24%, 40 ± 31%, 61 ± 30%, and 50 ± 29%. NH₄ removal was 9 ± 36%, 29 ± 72%, 31 ± 24%, and 45 ± 34%. BMP size, age, and location explained some of the variability. For example, small and shallow ponds and wetlands were more effective than larger, deeper ones in removing N. Despite well‐known intra‐annual variation in N fluxes, most measurements have been made over short time periods using concentrations, not flow‐weighted N fluxes. Urban N export is increasing in some areas as large storms become more frequent. Thus, accounting for the full range of BMP performance under such conditions is crucial. A select number of long‐term flux‐based BMP studies that rigorously measure rainfall, hydrology, and site conditions could improve BMP implementation.     

Characterization studies of a semi‐automated separation method for analysis of non‐ortho substituted polychlorinated biphenyl (PCB) congeners in environmental samples

Non‐ortho substituted polychlorinated biphenyl (PCB) congeners can account for the majority of the dioxin‐like toxicity in environmental samples, yet analysis for these congeners is difficult because other PCB congeners co‐elute with them in most Chromatographic methods. An automated method was developed which incorporates a porous graphitic carbon (PGC) column which is commercially available. Non‐ortho substituted congeners were successfully separated from interfering PCB congeners. Recoveries of non‐ortho substituted congeners were consistently reproducible (CV < 9%) when chicken eggs were fortified with individual congeners.     

Comments on and implications of a steady-state in coastal marine ecosystems

Coastal ecosystems can be thought of as being established by a number of physico-geochemical drivers, e.g. geochemistry and bathymetry of the basins, climate, tidal and freshwater flows, natural and anthropogenic inputs of nutrients and toxins, all of which exert an influence on the resulting communities of organisms. Depending on the interactions among the major drivers, ecosystems may occur on both large and small scales and be basin-wide or within basins. For individual and separate ecosystems to exist with some permanence in time, e.g. reach a steady-state, they also have to be ‘defended’. Defences are mechanisms that counter changes to maintain the status quo. We argue, and present evidence to support the notion, that the defence mechanisms are inextricably tied to primary production and the biogeochemical cycling of organic matter and provide buffers that mitigate potentially adverse impacts by trace toxins. Colloid pumping, production of complexing ligands and sulfide formation are some of the mechanisms that control trace substances. Current methods for assessing ecosystems do not address the issue of steady-state, nor do they take account of defence activities, e.g. buffering. Therefore, they cannot assess the ‘robustness’ of ecosystems or their ability to resist change, for good or bad. Also, defence mechanisms may, for a time, mask future potentially serious impacts, suggesting that monitoring efforts with limited budgets should consider the measurement of the inputs into ecosystems as well as the immediate or short-term result of the inputs.     

Linking male qualities to multiple display traits: an example in a fish with exclusive male care

Recent theoretical models predict that the relative allocation to advertisement and parental care depends on whether paternal care is necessary for offspring survival: In species with exclusive male care, male investment in attraction is expected to reliably indicate paternal care effort and male phenotypic quality. Previous research, yielding contrasting results, has considered how one trait involved in mate attraction interacts with parental care or a specific aspect of male quality. In the blenny Salaria pavo, we perform a comprehensive analysis of the interplay between overall male attractiveness and male quality, the latter in terms of fertility, condition, and parental care. In this fish, males are larger than females, exhibit two sexually dimorphic traits (head crest and anal glands), and solely care for eggs. We generated a male attractiveness index through principal component analyses of morphological traits and quantified parental effort as the total time spent in egg care. In addition, we analyzed the relationships between specific components of attractiveness and male qualities. In agreement with theory predictions, we found that male overall attractiveness is a reliable indicator of fertility, in terms of sperm number, but is unrelated to body condition and parental care effort, with males able to perform high levels of care regardless of their level of advertisement. However, the relative expression of head crest area appears positively related to sperm number but is traded-off with parental care effort. These findings underline the need, in addressing real patterns, to consider interactions between multiple aspects of male display and quality.     

Process modeling and economic assessment of converting municipal solid waste into solid fuel via hydrothermal processing: a case study in Vietnam

Journal of Material Cycles and Waste Management - As with any developing country, Vietnam has faced&nbsp;numerous challenges in the management and treatment of municipal solid waste (MSW)....     

Determining shark size from forensic analysis of bite damage

Bite damage patterns have long been used to estimate shark species and body size, with somewhat limited success. The lack of fit between damage patterns and shark size is partially due to variation in tooth size and shape within an individual. The ability to accurately predict body size from bite patterns is important for better understanding the ecological and behavioral underpinnings of shark bites/attacks on marine organisms, humans, and submarine equipment. To this end, we measured interdental distance (IDD) between the most labial teeth in the first six tooth files on both the upper and lower jaws, as well as the circumference of the portion of each jaw that bears teeth, for prepared jaw sets from fourteen shark species and regressed these data against total length. IDD is allometric as well as an accurate predictor of total length in all species examined, except Carcharhinus acronotus. Tooth-bearing circumference is also allometric and predictive of total length in all species. Though considerable overlap exists in IDD and circumference ranges among species for the total length ranges examined, Carcharodon carcharias and Isurus sp. can be differentiated from Carcharhinus limbatus, Carcharhinus brevipinna, and C. acronotus based on these values alone. When combined with knowledge of species-specific feeding behavior, geographic distribution, and habitat preferences, these simple measures from bite damage patterns allow quick, accurate assessment of shark size and potential species.