TiO2-xNx光催化氧化苯甲酸的研究

采用悬浮态光催化反应体系,以氙灯为光源,自制纳米TiO2-xNx为催化剂,考察了苯甲酸光催化氧化过程中TiO2-xNx质量浓度、反应体系初始pH和苯甲酸初始质量浓度对苯甲酸溶液中TOC去除率的影响。实验结果表明：最佳催化剂质量浓度为0．30g／L;TiO2-xNx的等电点为pH=5．3,在酸性条件下（pH=2．0）更有利于苯甲酸在催化剂表面的吸附,以及光生电子与O2反应生成·OH的进行;随苯甲酸初始质量浓度增加,TOC去除率降低,反应速率也相应地降低。TiO2-xNx比P25型TiO2表现出更强的浓度适应能力。     

基层环境执法中环境行政强制问题的探讨

环境行政强制包括环境行政强制措施和环境行政强制执行.在基层环境执法实践中,环境行政强制措施尤其是环境行政强制执行存在许多困惑和问题,拓展环境行政强制措施,给予环保部门一定的行政强制执行权是提高基层环境执法效率和遏制环境污染的有效途径.     

烟气脱硝技术及在我国的应用

氮氧化物气体是危害最大、最难处理的大气污染物之一。随着经济的发展,有效控制燃煤造成的大气污染已经刻不容缓,特别是控制燃煤过程中的氮氧化物,烟气脱硝技术显得相当重要。本文分析了几种常用的烟气脱硝技术（选择性催化还原脱硝技术、选择性非催化还原脱硝技术、碱性溶液吸收法和等离子体活化法等）的原理、技术特点以及在我国的应用情况。     

Effect of manganese ion on the mineralization of 2,4-dichlorophenol by ozone

Mineralization of 2,4-dichlorophenol (DCP) was studied by ozone with Mn(2+) as an ozonation catalyst. Laboratory scale semi-batch ozonation experiments were conducted at room temperature. The results showed that trace amount of Mn(2+) accelerated the mineralization of DCP. Total organic carbon removal rate was independent on Mn(2+) dosage at its range of 0.1-0.5 mgL(-1). Dissolved ozone concentration in the solution remained low level in the catalytic ozonation process, which indicated that Mn(2+) catalyzed decomposition of ozone. DCP mineralization was inhibited in catalytic ozonation by the addition of carbonate. Electron spin resonance/spin-trapping technique was used to determine hydroxyl radicals, and the results showed that larger amounts of hydroxyl radicals were produced in catalytic ozonation system than those of single ozonation. Intermediates mainly including aliphatic carboxylic acids were determined qualitatively and semi-quantitatively by GC-MS. And, a general pathway for mineralization of DCP was proposed.     

Radiation-induced degradation of methyl orange in aqueous solutions

Degradation of methyl orange under gamma-irradiation was investigated. The reactions followed pseudo first-order kinetics. Apparent degradation rate constant, estimated through linear regression analysis, increased with an increase of dose rate and a decrease of initial methyl orange concentration. Degradation of methyl orange was significantly accelerated under oxidative condition, but was slightly enhanced under reductive condition. However, the result of decoloration was better under reductive condition than oxidative one. An analysis on the intermediates using Fourier transform infrared and gas chromatography/mass spectrometry demonstrates that the radiolytic degradation of methyl orange was processed with different C-N cleavages under oxidative and reductive conditions.     

Different reaction mechanisms of diphenylether and 4-bromodiphenylether with nitrous acid in the 355 nm laser flash photolysis of mixed aqueous solution

The microscopic reaction mechanisms of diphenylether (DPE) and 4-bromodiphenylether (4-BrDPE) with nitrous acid (HNO(2)) in the absence of O(2) have been explored by the 355nm laser flash photolysis. It was proposed that OH radical, from the photolysis of HNO(2), added to DPE forms the C(12)H(10)O-OH adduct while added to 4-BrDPE forms the 4-BrDPE-OH and 4-BrOH-DPE adducts. The first-order decay rate constants of the C(12)H(10)O-OH adduct, 4-BrDPE-OH adduct and 4-BrOH-DPE adduct were measured to be (1.86+/-0.14)x10(5)s(-1), (2.19+/-0.04)x10(5)s(-1) and (1.56+/-0.03)x10(5)s(-1), respectively. The final photolysis products of DPE and HNO(2) identified by GC/MS analysis were phenol, o-hydroxydiphenylether, p-hydroxydiphenylether and p-nitrodiphenylether, while the final photolysis product of 4-BrDPE and HNO(2) identified by LC/MS analysis was mainly the dimer.     

Sorption of pentachlorophenol on surficial sediments: the roles of metal oxides and organic materials with co-existed copper present

The sorption characteristics of pentachlorophenol (PCP) in the surficial sediments were investigated using a selective extraction procedure. The results show that the Gamma(max) of PCP sorption decreased from 1.60mumolg(-1) to 0.69mumolg(-1) by approximately 60% after selective removal of organic materials from the sediments. The sorption of PCP in the sediments after selective removal of Mn oxides increased nearly up to 600% (from 1.60mumolg(-1) to 11.11mumolg(-1)) and, to a less degree, the PCP sorption in the sediments after simultaneous removal of Fe/Mn oxides (Gamma(max)=3.53mumolg(-1)). The analysis of the data using an additional model indicates that the contribution of Mn oxides to PCP sorption was negative, and Fe oxides and organic materials both have greater potential for sorption of PCP with less contribution from residues including Mn and Fe oxides in the residual fractions determined by a sequential extraction procedure and clay and silicate minerals. The differences in the decreased degrees of PCP sorption with increasing of Cu suggest that competition between Cu and PCP for sorption sites mainly takes place on Fe oxides.     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.