Cadmium (Cd) distribution and contamination in Chinese paddy soils on national scale

Rice is a staple food by an increasing number of people in China. As more issues have arisen in China due to rice contaminated by cadmium (Cd), Cd contamination in arable soils has become a severe problem. In China, many studies have examined Cd contamination in arable soils on a national scale, but little studies have focused on the distribution of Cd in paddy fields. This study explored the spatial pattern of Cd in paddy soils in China, made a preliminary evaluation of the potential risk, and identified the most critically contaminated regions based on the domestic rough rice trade flow. The results showed that Cd concentrations in paddy soils in China ranged from 0.01 to 5.50 mg/kg, with a median value of 0.23 mg/kg. On average, the highest Cd concentrations were in Hunan (0.73 mg/kg), Guangxi (0.70 mg/kg), and Sichuan (0.46 mg/kg) provinces. Cd concentrations in paddy soils in central and western regions were higher than those in eastern regions, especially the southeastern coastal regions. Of the administrative regions, Cd standard exceedance rate was 33.2 %, and the heavy pollution rate was 8.6 %. Regarding to Cd of paddy soil, soil environmental quality was better in Northeast China Plain than in Yangtze River Basin and southeastern coastal region. Mining activities were the main anthropogenic pollution source of Cd in Chinese paddy soil. Based on rice trade, more of the Chinese population would be exposed to Cd through intake of rice produced in Hunan province. Certain regions that output rice, especially Hunan province, should be given priority in the management and control of Cd contamination in paddy soil.     

Simultaneous determination of estrogenic odorant alkylphenols,chlorophenols, and their derivatives in water using online headspace solid phase microextraction coupled with gas chromatography-mass spectrometry

A simple online headspace solid-phase microextraction (HS-SPME) coupled with the gas chromatography-mass spectrometry (GC-MS) method was developed for simultaneous determination of trace amounts of nine estrogenic odorant alkylphenols and chlorophenols and their derivatives in water samples. The extraction conditions of HS-SPME were optimized including fiber selection, extraction temperature, extraction time, and salt concentration. Results showed that divinylbenzene/Carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber was the most appropriate one among the three selected commercial fibers, and the optimal extraction temperature, time, and salt concentration were 70 °C, 30 min, and 0.25 g/mL, respectively. The developed method was validated and showed good linearity (R ²?>?0.989), low limit of detection (LOD, 0.002–0.5 μg/L), and excellent recoveries (76–126 %) with low relative standard deviation (RSD, 0.7–12.9 %). The developed method was finally applied to two surface water samples and some of these target compounds were detected. All these detected compounds were below their odor thresholds, except for 2,4,6-TCAS and 2,4,6-TBAS wherein their concentrations were near their odor thresholds. However, in the two surface water samples, these detected compounds contributed to a certain amount of estrogenicity, which seemed to suggest that more attention should be paid to the issue of estrogenicity rather than to the odor problem.     

紫外-Fenton法处理高盐有机废水

以某电镀厂水回用系统产生的高盐有机废水为对象,对比研究了Fenton、UV-Fenton等工艺去除COD性能,考察了初始pH、H2O2投加量、Fe2+与H2O2摩尔比、反应时间等参数对处理效果的影响。结果表明:UV-Fenton工艺的最佳条件为初始pH=3.0,H2O2的投加量3 mmol/L,RFe2+:H2O2=1:1,反应时间30 min;在此条件下,COD去除率可达到60%以上,分别较Fenton和UV-H2O2工艺提高23.0%和39.3%。UV-Fenton工艺中,Fenton与UV表现出良好的协同效果,其处理效果较单独Fenton和单独UV处理效果之和高14.7%。UV的引入促进Fe(II)/Fe(Ⅲ)循环,可以提高·OH生成量以及Fe2+与H2O2利用率。UV-Fenton是处理高盐有机废水的可行工艺之一。     

Fenton-like/TiO2催化介质阻挡放电体系对活性艳蓝的降解

为了提高等离子放电对染料的降解效率,研究了Fenton-like/TiO2耦合催化介质阻挡放电体系对活性艳蓝(X-BR)的脱色效果及降解机理。结果表明,投加Fe2+ 或Fe3+与TiO2组成的耦合催化体系可以显著提高X-BR的脱色率。反应10 min后,紫外可见扫描光谱和阴离子(Cl-、NO3-、SO42-)产量分析表明,介质阻挡放电体系可以有效破环蒽醌发色基团,耦合催化体系不仅强化了蒽醌结构的破坏,同时更加有效地破坏了苯环和萘环结构从而提高了TOC降解率。最后,比较研究了投加Mn2+ 和Cu2+对X-BR的脱色效果,在投加浓度均为0.5 mmol/L条件下,两者对X-BR的脱色起到抑制作用,因此,两者不适合作为耦合催化介质阻挡放电体系的添加离子。     

电絮凝-超滤除氟工艺参数优化研究

电絮凝-超滤(electrocoagulation-ultrafiltration,EC-UF)工艺在饮用水除氟方面具有良好的应用前景。研究了EC-UF除氟效果和膜污染过程,考察了电流密度、水力停留时间、初始pH、初始氟浓度对除氟效果和膜污染的影响。结果表明,在连续流下EC-UF工艺除氟效果良好,在电流密度30 A/m2、水力停留时间20 min、初始pH在6.0~7.0的最佳工艺条件下,氟的去除率达到80%以上。膜污染主要是由电解过程产生的铝絮凝剂与氟离子形成的颗粒物质导致。上述结果为EC-UF除氟工艺改进提供了参考和依据。     

一株铅镉抗性菌株的分离鉴定及其生物学特性

鉴定了从黑龙江扎龙湿地土壤中筛选出的一株抗铅镉的菌株,研究了其生物学特性和部分生理生化指标。利用16SrDNA序列分析鉴定其菌属,并且研究Pb2+、Cd2+、Pb2+/Cd2+、温度、pH、盐以及抗生素对菌株生长的影响。经鉴定,该菌株为阴沟肠杆菌属(Enterobacter cloacae)。该菌株对Pb2+的去除率和吸附率分别达到了70.34%和44.39%,对Cd2+的去除率和吸附率分别达到了40.54%和25.14%。该菌株最适生长温度为25℃,最适生长pH为7.0左右。此菌株对抗生素亚胺培南最敏感。随着盐、Pb2+、Cd2+、Pb2+/Cd2+混合浓度的升高,该菌株生长受到抑制。     

同步进出水SBR设备最佳进水方式流态模拟

借助流体计算软件Fluent对某同步进出水SBR设备4种不同进水位置以及3种进水孔排布分别进行流态模拟,根据模拟结果得到最佳的进水方式;同时在该进水方式下对进水流量为0.5、0.7、1.0、1.3和1.5 m3/h时反应器内的流态分布情况进行了数值模拟,最后通过示踪剂实验与模拟结果对比验证。对于实验用SBR(长×宽×高为2 m×2 m×1.2 m),进水流量1.0 m3/h是最佳进水流量,此时反应器内流态稳定,进水区域主要分布于反应器中下部以及远离堰口的池壁附近,死水区面积较小,冲击负荷适中,进水对出水水质影响较小;当进水流量小于1.0 m3/h时,进水主要分布于反应器池底,对角线方向以及远离进水端池壁附近3个区域且彼此相对独立,池内死水区面积较大;当进水流量大于1.0 m3/h时,进水冲击负荷过大,迅速形成短流,影响出水水质。     

温度对高负荷生态滤床处理东营市河道水的影响

采用生态滤床对东营市高氯(咸水)河道水进行处理研究,水力负荷控制为5~7 m3/(m2·h)(高出国家标准近5倍),探究不同温度对高负荷生态滤床污染物去除效率的影响。研究结果表明,水温在4~32℃范围内,温度对生态滤床COD、NH4+-N和TP去除率影响较少,污染物去除率较高,验证了势能增氧生态滤床在高氯条件下良好的净化效果。但温度对进水TN浓度影响较大,导致生态滤床对TN去除效果不稳定,推断主要原因是,溶解氧浓度较高和碳源供应不足抑制了反硝化细菌的反硝化反应。     

不同工况条件混合赤泥力学特性变化规律

在利用常规土工实验和XRF、XRD、SEM等微观测试手段分析了刚出厂混合赤泥化学成分、矿物组成、微观结构的基础上,通过无侧限抗压强度实验和固结排水三轴剪切实验对自然风干、浸水饱和、非饱和-饱和干湿循环3种工况条件下混合赤泥不同龄期力学特性的变化规律进行了研究。结果表明,自然风干试样的无侧限抗压强度和粘聚力要明显大于相同龄期浸水饱和试样和干湿循环试样,说明混合赤泥的强度形成与滤水过程有一定联系,且其强度的增长均主要集中在脱水龄期前70天内;混合赤泥在3种不同工况条件下无侧限抗压强度和粘聚力均有一定程度的增长,说明混合赤泥可在浸水环境下生成不可逆增长的具有水硬性的胶结矿物,使其在水环境中不发生崩解,可保证混合赤泥堆体在自然堆存过程中其力学特性满足安全堆载要求。