山区高速公路挖方边坡的稳定性评价与安全防护技术

山区高速公路挖方边坡的稳定性对道路交通安全具有重要影响 ,阐述了进行挖方边坡的稳定性评价和安全防护的必要性 ,提出了评价原则、工作程序、评价方法及系列安全防护技术。得出了关于山区高速公路挖方边坡的稳定性评价和安全防护的几点认识。     

编制企业事故应急预案的实践与探索

企业编制事故应急预案是在新形势下面临的新任务，也是《安全生产法》赋予企业的责任。通过介绍编制《事故应急预案与急救措施》的具体实践，探索了一些编制事故应急预案的程序和原则。     

关于污水处理厂质量监理工作的探讨

污水处理已引起我国政府的高度重视。以此为契机，通过对阳江市第一净水厂工程监理工作的回顾，初步探讨了污水处理厂质量监理工作。     

企业计算机网络的安全管理

从技术手段和制度规范上，综合提出了企业计算机网络的安全管理策略。     

工作岗位设计与安全管理

员工工作情绪对安全生产有着相当的影响，表现在工作投入和注意心理等方面，直接或间接地影响企业的安全生产状况。采用科学的工作岗位设计方法和管理方法，藉以改善员工工作投入和工作中的注意心理，必将有利于改善员工对工作本身的态度，以及改善员工对安全生产的直接和间接参与程度，最终促进安全生产。     

污水处理厂自动化监控系统

自动化技术在能源、电力、机械、环境等行业的应用越来越广泛，也促使了自动化水平的不断提高。由于Synall2000强大的网络化功能，为将来系统在子网级和企业级实施基于Synall2000网络化数据监控系统打下了坚实、可靠的基础。在全面实施单个站点自动化监控的基础上，可方便地实现子网级的网络化数据自动采集与监控系统。     

钢厂热锯机噪声控制方案

某钢厂热锯机的工作噪声问题严重影响附近居民的日常生活，急需解决。根据其发声机理，通过采取对圆盘锯边缘开槽，安装吸隔声罩，对锯片增加阻尼材料，夹紧工件等措施取得了较好的降噪效果。     

锅壳锅炉后管板孔桥裂纹事故的分析及处理

分析了锅壳锅炉后管板裂纹产生的原因，阐述了事故发生的机理和处理方法。     

Numerical Simulation of Synoptic Condition on a Severe Sand Dust Storm

By using observational data and MM5, an observational analysisand numerical study was conducted on the synoptic condition of a severe dust storm that was caused by a Mongolian cyclone whichoccurred from 6 to 8 April 2001. Results illustrated thatthe cyclogenesis was due to the isentropic potential vorticity (IPV) advection in the upper troposphere and the terrain modifiedbaroclinicity in the mid-lower troposphere. The Altai-Sayan complex of mountains blocked the lower level cold air and made the isentropic surface sharply steep. When the air slid down along the isentropic surface the increasing of baroclinicity anddecreasing of stability blew up the vertical vorticity development.The formation of the dust storm was a result of a cyclonic cold front passing across the area. The occurrence of this dust stormwas closely related to the strong surface wind, which was accompanied by a cold front passing, rather than the cyclogenesis, itself. Hence, the reason for the pre-front dust storm formulation was the formation of heating convection. Reasons behind the formation of a black storm (visibilitylower than 50 m), which occurred in the mid-north part ofInner Mongolia, lay in several aspects. Firstly, in thisarea the surface wind was strong, a direct result of thedownward transport in mid-lower troposphere. Secondly,the cold front passed over the effected area near sunsetso the air obtained much more surface heating to form adeeper mixed layer (ML). Thirdly, cooperation between thelower level wind and the terrain made the atmosphere inthis area and acquired the maximum advective contributionnecessary to form a deep post-front ML. The sensitivityexperiment revealed that surface heat flux was important to the frontal lifting. In addition, the forcing of surface heating wasalso seen as the primary forcing mechanism of frontogenesis. Meanwhile, removal of the surface heat flux made the atmosphericstratification became stable and the pre-storm ML very shallow,which weakened the strength of the dust storm.     

COMPARATIVE STUDY OF OPTIMIZATION TECHNIQUES FOR IRRIGATION PROJECT PLANNING1

ABSTRACT: This study presents three optimization techniques for on‐farm irrigation scheduling in irrigation project planning: namely the genetic algorithm, simulated annealing and iterative improvement methods. The three techniques are applied to planning a 394.6 ha irrigation project in the town of Delta, Utah, for optimizing economic profits, simulating water demand, and estimating the crop area percentages with specific water supply and planted area constraints. The comparative optimization results for the 394.6 ha irrigated project from the genetic algorithm, simulated annealing, and iterative improvement methods are as follows: (1) the seasonal maximum net benefits are $113,826, $111,494, and $105,444 per season, respectively; and (2) the seasonal water demands are 3.03*10³ m³, 3.0*10³ m³, and 2.92*10³ m³ per season, respectively. This study also determined the most suitable four parameters of the genetic algorithm method for the Delta irrigated project to be: (1) the number of generations equals 800, (2) population size equals 50, (3) probability of crossover equals 0.6, and (4) probability of mutation equals 0.02. Meanwhile, the most suitable three parameters of simulated annealing method for the Delta irrigated project are: (1) initial temperature equals 1,000, (2) number of moves equal 90, and (3) cooling rate equals 0.95.