钙钛矿型催化剂催化湿式氧化处理煤气化废水纳滤浓缩液

采用溶胶-凝胶法制备了Mn掺杂钙钛矿型催化剂LaFexMn1-xO3,并以其为催化剂催化湿式双氧水氧化处理煤气化废水纳滤浓缩液。采用XRD,SEM,FTIR技术对催化剂进行了表征。表征结果显示：制备的催化剂均具有标准的钙钛矿型结构,其中,LaFe0.9Mn0.1O3的结构稳定,比表面积大。实验结果表明：制备的催化剂中LaFe0.9Mn0.1O3的催化活性最高,且稳定性好,连续使用5次后催化活性未见明显减弱;在H2O2投加量3.0 g/L、n（H2O2）∶n（LaFe0.9Mn0.1O3）=12∶1、反应温度160 ℃、反应压力1 MPa、浓缩液pH 3、反应时间60 min的最优条件下,COD、UV254和TOC的去除率分别达到80.9%、95.2%和68.0%,BOD5/COD由0.02提升至0.40,可生化性大幅提高。     

色谱、光谱及联用技术在多农药残留检测中的应用

介绍了国内外多农药残留检测的发展状况,综述了色谱法、光谱法、色谱-质谱联用技术、色谱-光谱联用法、多维气相色谱技术的特点及在多农药残留检测中的应用,指出多农药残留检测在今后的农药残留检测中将占据主导地位.     

A comparative study of vocational education and occupational safety and health training in China and the UK

In order to enhance Chinese workers’ occupational safety awareness, it is essential to learn from developed countries’ experiences. This article investigates thoroughly occupational safety and health (OSH) in China and the UK; moreover, the article performs a comparison of Chinese and British OSH training-related laws, regulations and education system. The following conclusions are drawn: China’s work safety continues to improve, but there is still a large gap compared with the UK. In China a relatively complete vocational education and training (VET) system has been established. However, there exist some defects in OSH. In the UK, the employer will not only pay attention to employees’ physiological health, but also to their mental health. The UK’s VET is characterized by classification and grading management, which helps integrate OSH into the whole education system. China can learn from the UK in the development of policies, VET and OSH training.     

Are older drivers’ driving patterns during an on-road driving task representative of their real-world driving patterns?

Abstract

Objective: The current study investigated whether older drivers’ driving patterns during a customized on-road driving task were representative of their real-world driving patterns.

Methods: Two hundred and eight participants (male: 68.80%; mean age?=?81.52 years, SD?=?3.37 years, range?=?76.00–96.00 years) completed a customized on-road driving task that commenced from their home and was conducted in their own vehicle. Participants’ real-world driving patterns for the preceding 4-month period were also collected via an in-car recording device (ICRD) that was installed in each participant’s vehicle.

Results: During the 4-month period prior to completing the on-road driving task, participants’ median real-world driving trip distance was 2.66?km (interquartile range [IQR]?=?1.14–5.79?km) and their median on-road driving task trip distance was 4.41?km (IQR?=?2.83–6.35?km). Most participants’ on-road driving task trip distances were classified as representative of their real-world driving trip distances (95.2%, n?=?198).

Conclusions: These findings suggest that most older drivers were able to devise a driving route that was representative of their real-world driving trip distance. Future research will examine whether additional aspects of the on-road driving task (e.g., average speed, proportion of trips in different speed zones) are representative of participants’ real-world driving patterns.     

我国林业碳汇市场供需研究——以广东长隆碳汇造林项目为例

广东长隆碳汇造林项目作为我国首个获得国家发展和改革委员会签发的林业温室气体自愿减排(CCER)项目,对于我国林业碳汇参与应对气候变化具有重要的示范意义。本文对广东长隆碳汇造林项目进行了成本收益分析,发现林业碳汇交易价格被远远低估,从而使该项目不具备经济上的可复制性。为探究交易价格被低估的原因,本文考察了林业碳汇市场的供需关系,发现目前碳交易市场对林业碳汇CCER需求不足仅是表象,供需错配才是实质。首先,从需求侧来看,广东省碳排放配额设置过于宽松,缺乏林业碳汇CCER的接纳能力;其次,就供给侧而言,CCER的交易成本很高,且项目申报要求业主为企业法人,这严重限制了林业碳汇CCER的有效供给。鉴于以上问题,本文提出应同时从林业碳汇CCER的需求侧和供给侧着手改革。就需求侧而言,收紧广东省碳排放配额总量,并将林业碳汇CCER交易由补充机制改为配额管理。就供给侧而言,可以结合广东省推进林业碳普惠制度,将项目申报主体和交易主体放宽到独立法人和个人,广泛吸收民间资本、培育大型林业企业开展碳汇造林项目;降低碳汇项目进入门槛,根据省情制定方法学,简化签批手续。     

四氨基酞菁钯/γ-Al_2O_3可见光催化降解罗丹明B

采用浸渍法制备了四氨基酞菁钯(PdTAPc)/γ-Al_2O_3负载型光催化剂,采用UV-Vis,FTIR,XRD,SEM技术对其进行了表征,并将其用于罗丹明B的可见光催化降解,考察了光催化剂加入量、溶液pH、H_2O_2加入量、反应温度对罗丹明B降解效果的影响,并对光催化剂的稳定性进行了测试。表征结果显示,PdTAPc以圆片状负载于γ-Al_2O_3上,二者的结构均未发生明显变化。实验结果表明:在光催化剂加入量1.6 g/L、溶液pH 7.0、H_2O_2加入量12 mmol/L、反应温度20℃的优化条件下反应120 min,罗丹明B(质量浓度0.05 g/L)的降解率高达95%;光催化剂具有较高的稳定性,使用4次后罗丹明B的降解率仍高于85%。     

粉煤灰基层状金属氧化物对水中活性红X-3B的吸附

以粉煤灰(FA)为原料,采用共沉淀法制备了层状双金属氢氧化物(LDH)和层状金属氧化物(LMO,也称LDO),并采用XRD和BET技术进行了表征。比较了FA、LDH、LMO对活性红X-3B染料(X-3B)的吸附效果;考察了LMO吸附X-3B的影响因素,并探讨了吸附机理。XRD表征结果表明,LMO在吸附X-3B后重新恢复LDH层状结构。BET表征结果表明,LMO的比表面积大于LDH。吸附实验结果表明,3种吸附剂对X-3B吸附效果的优劣顺序为:LMOLDHFA;在初始X-3B质量浓度为50 mg/L、LMO投加量为2.0 g/L、吸附温度为25℃、吸附pH为7、吸附时间为30 min的条件下,X-3B去除率可达98.1%;LMO对X-3B的吸附符合Langmuir等温吸附方程,饱和吸附量为129.53 mg/g,且吸附过程可用准二级动力学方程描述。     

采用支持向量机算法优化电化学处理油田污水的工艺参数

采用支持向量机(SVM)算法,将Box-Behnken设计法与支持向量回归算法(SVR)实验参数优化软件相结合,优化电化学去除油田污水COD的工艺参数。通过量子粒子群算法对SVM算法参数进行优化,从建立的回归模型中找到工艺参数的全局最佳点:电解时间60 min,电解电流3 A,三维电极填充料中石英砂质量695 g。模型得到的COD理论最优去除率为92.48%,验证实验得到的COD去除率为91.43%。     

水环境中石油类物质分析方法探讨

在详述了国内外石油类分析方法的基础上,对各方法的适用范围、优缺点及可比性进行了深入分析,阐述了各类方法存在的共性问题,指出按照石油类物质毒性大小分别定量分析的方法将是未来的发展趋势。     

Zr掺杂TiO_2介孔材料光催化降解头孢氨苄

采用固相合成法制备了Zr掺杂TiO_2(Zr-TiO_2),运用XRD技术对其进行了表征,并将其用于水中头孢氨苄的光催化降解,通过单因素实验及正交实验优化了光催化反应条件。结果表明:制备的Zr-TiO_2为锐钛矿型介孔材料,孔径约为8.12 nm;各因素对头孢氨苄去除率的影响由大到小依次为光照时间、Zr-TiO_2投加量、初始头孢氨苄质量浓度;在Zr-TiO_2投加量为1.5 g/L、初始头孢氨苄质量浓度为10 mg/L、溶液pH为7.0、光照(300 W UV)时间为1.5 h的优化条件下,头孢氨苄去除率高达99.46%;Zr-TiO_2光催化剂的重复使用性能良好。