Well-to-wheels greenhouse gas and air pollutant emissions from battery electric vehicles in China

Mitigation and Adaptation Strategies for Global Change - Electric vehicles (EVs) play a crucial role in addressing climate change and urban air quality concerns. China has emerged as the global...     

Can a low-carbon development path achieve win-win development: evidence from China’s low-carbon pilot policy

Mitigation and Adaptation Strategies for Global Change - Low-carbon pilot (LCP) policy aims to not only achieve economic development but also address climate change problems in China. With a...     

Evaluating national hydrogen refueling infrastructure requirement and economic competitiveness of fuel cell electric long-haul trucks

This study explored the national hydrogen refueling infrastructure requirement along major United States (US) interstate highway corridors to support the deployment of fuel cell electric trucks (FCETs) for the national long-haul trucking fleet. Given the long-haul trucking shipment demand in 2025 projected by the Freight Analysis Framework, locations and capacities of hydrogen stations were identified for inter-zone freight flows, and the total daily refueling demand was estimated for intra-zone flows for each FAF zone. Based on the infrastructure deployment results, we conducted an economic feasibility analysis of FCETs by evaluating the total ownership cost. We found that when the FCET penetration is relatively high (e.g., 10% penetration), FCETs become more competitive in terms of fuel cost and idling cost and could be economic viable if the incremental vehicle cost is reduced to meet the near-term FCET technology cost targets and the liquefaction cost is reduced to an optimal case. We also observed that the station cost depends on regional factors, particularly regional demand, which is used to determine station capacity. Thus, one possible strategy for station roll-out is to have early investment in target regions where station costs are expected to be relatively low such as the Pacific and West South Central regions.

     

南京八卦洲农用地表层土壤重金属分布特征及风险评价

为查明南京八卦洲土壤重金属污染物类型及其影响范围,于2017年12月在洲内采集了471个表层土壤样品,测定了pH及As、Cd、Cr、Cu、Hg、Ni、Pb、Zn等8种重金属元素浓度,采用单因子指数法、内梅罗综合指数法和潜在生态危害指数法进行了污染风险评价。研究结果表明:As、Cd、Cr、Cu、Hg、Ni、Pb和Zn平均浓度分别为10.66、0.32、86.74、43.25、0.10、40.34、33.50和108.33 mg·kg-1,除As、Hg元素外,其余6种元素均超过南京市背景值,出现大范围的富集;Cd元素为研究区主要污染物,绝大部分为Ⅱ级轻微污染,均分布于八卦洲服务区附近的中、酸性土覆盖区,需做好安全利用措施。从全区来看研究区大部分农用地土壤处于安全生产级别,仅有少部分区域处于Ⅱ级和Ⅲ级风险水平,总体上潜在生态危害较低。     

水体及沉积物氮磷水平对附植藻类的影响

为了探讨湖泊富营养化过程中沉积物及水体氮、磷浓度对附植藻类的影响,通过室内模拟实验,研究了水体及沉积物氮、磷升高对苦草(Vallisnerianatans(Lour.) Hara)上附植藻类生长、群落组成及其体内氮、磷含量的影响.结果表明,在实验条件下,随着水中氮、磷含量升高,附植藻类生物量及附植藻类氮、磷含量均呈极显著增加(p0.01).随着水体可获得的氮、磷浓度升高,附植藻类的相对丰度有所变化,舟形藻(Navicula)、小球藻(Chlorella)及微囊藻(Microcystis)相对丰度随着氮、磷水平的升高而下降,直链藻(Melosira)则相反,但舟形藻、直链藻、微囊藻、小环藻(Cyclotella)和小球藻均为群落的优势属种.沉积物氮、磷含量升高对附植藻类生物量、优势种丰度及群落氮、磷含量影响较小,均未达到显著水平(p0.05).在实验条件下,沉积物氮、磷含量对附植藻类影响不大,而水体氮、磷浓度升高显著地促进了附植藻类生长.研究结果也为解释富营养化湖泊沉水植物衰退及消亡提供了一定的科学依据.     

表面活性剂增强修复地下水中PCE的砂箱实验及模拟

在石英砂充填的二维砂箱中开展表面活性剂（Tween 80）冲洗四氯乙烯（PCE）的修复实验,基于图像分析技术监测不同污染源区结构条件下NAPL相的去除过程.由于实验条件限制,实验中缺乏溶解相浓度数据.为此进一步基于UTCHEM数值模拟方法来理解NAPL相和溶解态之间的质量传输过程,并探讨表面活性剂浓度、注入速率等因素对修复效率的影响.综合砂箱实验和数值模拟结果表明：介质均质和非均质条件下会形成不同类型DNAPL污染源区结构,表现为离散状PCE与池状PCE体积比（GTP）差异.由于离散状污染物与表面活性剂的接触面积更大,更易被优先去除;初始GTP值越高,污染物的修复速率和修复效率也越高.增大表面活性剂浓度或提高表面活性剂的注入速率,虽然能提高DNAPL的修复速率,但会明显降低表面活性剂的修复效率,实验过程中修复效率降幅可达93%.线性驱动溶解模型可以有效地模拟表面活性剂修复DNAPLs过程,基于数值模拟方法选择合适的表面活性剂配比可有效的节省实际污染场址修复经费和时间成本.     

Effect of TiO2 nanoparticle aggregation on marine microalgae Isochrysis galbana

TiO_2 nanoparticles(NPs) could adversely impact aquatic ecosystems. However, the aggregation of these NPs could attenuate this effect. In this work, the biological effects of TiO_2 NPs on a marine microalgae Isochrysis galbana were investigated. The aggregation kinetics of TiO_2 NPs under different conditions was also investigated to determine and understand these effects. Results showed that, though TiO_2 NPs had no obvious impact on the size and reproducibility of algal cells under testing conditions, they caused a negative effect on algal chlorophyll, which led to a reduction in photosynthesis. Furthermore, fast aggregation of TiO_2 NPs occurred under all conditions, especially at the pH close to the p Hzpc. Increasing ionic strength and NP concentration also enhanced the aggregation rate.The aggregation and the following sedimentation of TiO_2 NPs reduced their adverse effects on I. galbana.     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

某型飞机外翼5—8肋损伤原因分析及修复探讨

目的 分析某型飞机外翼5—8肋油箱区结构不同程度损伤的原因,制定修复方案。方法采用受载分析、有限元仿真计算、静力试验数据分析等强度计算方法分析损伤产生的原因,采用扫描电子显微镜和光学显微镜对磨痕形貌进行观测等失效分析,对损伤结构件开展失效模式分析,根据损伤原因及失效模式制定科学简便的修复方案,同时对损伤长桁采取的修补措施进行强度校核。结果 通过对外翼油箱充压破坏理论分析、有限元仿真计算、静力试验数据反推,并结合飞机实际损伤情况,得出油箱破坏理论分析危险薄弱部位与真实破坏情况一致的结论。有限元仿真计算最危险结构部位与实际结构首先发生破坏部位吻合,可作为深入制定修复方案及推测实际加载压力的依据。通过静力试验数据反推、结构实际损伤及有限元仿真计算结论得出,外翼5—8肋结构出现损伤时油箱施加压力约0.5 MPa,针对损伤制定了更换外翼油箱内部第5—8肋损伤结构和贴补加强损伤长桁的修理方案,经结构强度校核,满足设计要求。结论 分析认为外翼5—8肋油箱区结构损伤原因为油箱压力超过设计值导致结构过载断裂,采用贴补加强修理损伤长桁和更换第5—8肋损伤结构的修复方案能够满足强度设计要求,可指导同类飞机类似结构损伤故障的原因分析和修理,提醒同类飞机维修人员在飞机维护时应关注外翼油箱压力超压问题。     

广东省生活垃圾焚烧设施环境与健康风险评估构架研究

生活垃圾焚烧设施的建立是解决城市生活垃圾逐年增多的有效方式之一,但其所引发的环境与健康问题成为公众关注的热点。基于广东省对生活垃圾焚烧设施的研究,以环境管理为目标,结合国内外在该领域的研究现状,提出广东省生活垃圾焚烧设施环境与健康风险评估构架。通过该构架的多年实践,总结了广东省生活垃圾焚烧设施环境与健康风险评估研究所取得的成效,有望将该成果推而广之,从而使该行业实现绿色生态的蓬勃发展。