Metabolomic modulations in a freshwater microbial community exposed to the fungicide azoxystrobin

An effective broad-spectrum fungicide, azoxystrobin (AZ), has been widely detected in aquatic ecosystems, potentially affecting the growth of aquatic microorganisms. In the present study, the eukaryotic alga Monoraphidium sp. and the cyanobacterium Pseudanabaena sp. were exposed to AZ for 7 days. Our results showed that 0.2–0.5 mg/L concentrations of AZ slightly inhibited the growth of Monoraphidium sp. but stimulated Pseudanabaena sp. growth. Meanwhile, AZ treatment effectively increased the secretion of total organic carbon (TOC) in the culture media of the two species, and this phenomenon was also found in a freshwater microcosm experiment (containing the natural microbial community). We attempted to assess the effect of AZ on the function of aquatic microbial communities through metabolomic analysis and further explore the potential risks of this compound. The metabonomic profiles of the microcosm indicated that the most varied metabolites after AZ treatment were related to the citrate cycle (TCA), fatty acid biosynthesis and purine metabolism. We thereby inferred that the microbial community increased extracellular secretions by adjusting metabolic pathways, which might be a stress response to reduce AZ toxicity. Our results provide an important theoretical basis for further study of fungicide stress responses in aquatic microcosm microbial communities, as well as a good start for further explorations of AZ detoxification mechanisms, which will be valuable for the evaluation of AZ environmental risk.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds (BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol (SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity. In places with high plant cover in the tropics and in China where air pollution is serious, the effect of BVOCs on ozone and secondary organic aerosols is strong. The present research aims to provide a comprehensive review about the emission rate, emission inventory, research methods, the influencing factors of BVOCs emissions, as well as their impacts on atmospheric environment quality and human health in recent years in Asia based on the summary and analysis of literatures. It is suggested to use field direct measurement method to obtain the emission rate and model method to calculate the emission amount. Several recommendations are given for future investigation and policy development on BVOCs emission.     

达里诺尔湖水体DOM荧光特征及其来源解析

达里诺尔湖（简称“达里湖”）是内蒙古自治区高原地区重要的生态屏障,探究达里湖水质状况及污染来源,对加强流域水环境治理、改善水环境质量具有十分重要的意义.于2018年9月及2019年6月对湖水进行采样,并通过三维荧光光谱结合PARAFAC（平行因子分析）模型,探究达里湖水体DOM（溶解性有机质）来源及其与水质的关系.结果表明:①达里湖水体中pH较高,ρ（DOC）（DOC为溶解性有机碳）、ρ（NH₄+-N）、ρ（TP）相对较高,均超过GB 3838—2002《地表水环境质量标准》Ⅴ类水质标准限值.②水体中DOM含4种荧光组分.夏季水体DOM主要分布于河流入湖口附近,其中,类腐殖质荧光组分（紫外区类富里酸和可见区类富里酸）占总组分的62.93%,类蛋白类荧光组分（类色氨酸和类酪氨酸）占总组分的36.07%;秋季水体DOM主要分布于东南侧,其中,类腐殖质荧光组分占总组分的40.52%,类蛋白类荧光组分占总组分的59.48%.③达里湖采样点荧光参数表明,达里湖DOM自生源特征较强,腐殖化程度较低.类腐殖质荧光组分与ρ（DOC）、ρ（Chla）均呈正相关,类色氨酸荧光组分与pH呈正相关,类络氨酸与ρ（DTN）、ρ（NH4+-N）、ρ（DTP）均呈正相关.研究显示,达里湖DOM具有陆源与生物源双重特性,DOM的形成与微生物、细菌、浮游生物的生命活动密切相关.      

不同制备温度下污泥生物炭对Cr(Ⅵ)的吸附特性

以城市剩余污泥为原料,于300,400,500,600 ℃温度条件下制备生物炭,通过单因素静态吸附实验探讨制备温度对生物炭吸附Cr（Ⅵ）的影响。结果表明:在500 ℃以内随着温度上升制备的生物炭对Cr（Ⅵ）的吸附量增加,制备温度高于500 ℃后变化不明显;扫描电镜（SEM）、比表面积（BET）、傅里叶红外光谱（FTIR）表征结果显示,热解温度对生物炭表面形貌和官能团组成有显著影响;等温模型及动力学拟合结果表明,生物炭吸附Cr（Ⅵ）为单分子层吸附、物理-化学复合吸附。热解温度对污泥制备生物炭吸附Cr（Ⅵ）的性能有显著影响,最佳制备温度为500 ℃,在此条件制备的生物炭对Cr（Ⅵ）的理论吸附量可达7.93 mg/g。     

生物炭复合青霉菌修复砷污染土壤对其微生物群落功能多样性的影响

真菌修复砷污染土壤是一种能够有效吸附固化环境中砷的重要措施.生物炭作为目前修复重金属的热点,其多空疏松的结构、较高的离子交换量、丰富的有机碳含量等都说明了其在土壤修复中的地位.为了探究生物炭与青霉菌在修复砷污染土壤的同时对土壤中微生物活性及其多样性的影响,在室内孵育条件下,运用Biolog法研究了3×3随机区组试验（3个生物炭梯度分别为0%、2%、4%,3个青霉菌梯度分别为0%、10%、20%）下土壤微生物对不同类型碳源的利用能力以及多种功能性指数的影响.结果表明:①添加青霉菌与生物炭后,土壤中有效砷含量较对照组显著下降,从而影响其微生物群落功能多样性.②砷污染土壤中微生物群落功能多样性、碳源利用丰富度随生物炭浓度梯度的升高呈先升后降的趋势.③高接菌量（20%）与低接菌量（10%）对砷污染土壤中微生物群落功能多样性的影响没有显著性差异.④2%生物炭与10%青霉菌处理土壤中微生物群落功能多样性、碳源利用丰度最高.⑤青霉菌对胺类及少部分酸类碳源的利用能力较弱（AWCD < 0.5,AWCD为Biolog微平板孔中溶液吸光值平均颜色变化率）,对氨基酸类中大部分碳源以及脂类碳源的代谢能力较强（AWCD>1.0）,对糖类、酚酸类的代谢能力稍弱（AWCD为0.3~1.0）,青霉菌对D-半乳糖醛酸、L-天冬酰胺酸、L-丝氨酸、L-精氨酸、r-羟基丁酸这5种碳源的利用率最高（AWCD>1.2）.研究显示,低浓度生物炭可增加砷污染土壤中微生物群落多样性,生物炭含量的继续增加会对微生物产生抑制作用;青霉菌添加到砷污染土壤后,会显著提升砷污染土壤中微生物的群落功能多样性,改善砷污染土壤中微生的物群落结构;青霉菌的优势碳源大多为植物根系分泌物,可为后续青霉菌与超积累植物复合修复砷污染土壤提供参考.      

轻质高强多功能点阵夹层结构研究进展

根据材料类型和点阵结构,对点阵夹层结构进行了分类简述,并从静态、动态力学性能上,分析了各类点阵夹层结构的优缺点。简要叙述了设计过程中,综合考虑材料、结构以及功能等影响因素,针对不同使用工况的要求,可对各影响因素进行匹配设计,以实现传热特性、电磁波屏蔽特性、声学特性等不同的功能性需求。然后介绍了复合点阵夹层结构(嵌锁组装、模具热压成形、穿插编织)和金属点阵夹层结构(冲压成形、挤压线切割、拉伸网折叠、搭接拼装、熔模铸造以及增材制造)的主要制造工艺。最后提出如何将设计因子与多目标进行匹配及优化设计,是轻质高强点阵夹层结构的重点研究方向,轻质高强点阵夹层结构将朝多材料及多结构复合方向发展,开发新的制造工艺,提高费效比,是点阵夹层结构材料需解决的问题。     

内饰材料发射率对密封舱室热防护效率的影响

目的探究密封舱室热防护效率与其内饰材料表面发射率的关系,分析内饰材料发射率对其表面温度、舱室内温度的影响规律。方法采用自行设计的小型密封舱室和加热测量装置,对内饰材料表面及舱室内温度进行测量。结果当内饰材料发射率为0.09时,内饰表面温度为141.2℃,舱室内平均温度仅为90.8℃;内饰材料发射率为0.91时,内饰表面温度为124.4℃,舱室内平均温度为109.1℃。结论试样表面温度随材料发射率的提高而降低,舱室内部空气平均温度随材料发射率的提高而升高;试样表面温度与舱室空气平均温度的温度差随材料发射率的提高而减小;同时,相同试样表面温度与舱室平均温度的温度差随加热温度的提高而增加。     

UASB启动运行特征及互营丙酸氧化菌定量分析

为揭示升流式厌氧污泥床（UASB）反应器启动运行效能与互营丙酸降解菌群数量之间的关系,以稀释的玉米淀粉生产废水为底物,考察了UASB启动期的运行特征,并采用实时荧光定量PCR技术（qPCR）分析了互营丙酸降解菌群（丙酸氧化菌和产甲烷菌）的演替规律.结果表明,在进水COD 2000mg/L和水力停留时间（HRT）24h条件下,经过38d的连续运行,COD去除率达到了91.9%.当HRT分阶段缩短至8h时,比产甲烷速率达到了315LCH₄/（kg COD·d）,且形成了沉降性能良好的颗粒污泥.qPCR检测结果表明,至少有5种已鉴定的丙酸氧化菌存在于UASB反应器中.Pelotomaculum propionicum为接种污泥中的主要丙酸氧化菌,约占检测到丙酸氧化菌总数的45.7%.它的数量随着HRT缩短不断减少.而Syntrophobacter sulfatireducens和S.wolinii的数量随着HRT缩短不断增加,并在启动完成时达到最大值,分别为1.3×10³,5.5×10³个16S rRNA基因拷贝数/ng DNA,演替成为成熟颗粒污泥中的优势丙酸氧化菌群.Methanobacterium和Methanosarcina为接种污泥中的主要氢营养型产甲烷菌和乙酸营养型产甲烷菌,其数量随着HRT的缩短而逐渐减少,而Methanospirillum和Methanosaeta的数量随HRT的缩短逐渐增加,成为成熟颗粒污泥中的优势产甲烷菌群.     

京津冀地区钢铁行业协同减排成本-效益分析

京津冀地区是我国钢铁行业布局最集中的区域,也是大气污染治理的重点区域之一.分析京津冀地区钢铁行业各类治污手段中长期减排的成本-效益,对于选择最经济有效的减排路径、加快推动该地区大气环境质量达标意义重大.基于能源环境、环境分布、人群健康效益评价等模块构建多模型耦合方法,以2015年为基准年,以每5 a为时间节点,设计了京津冀地区钢铁行业规模-结构、规模-技术、规模-末端治理、综合减排4种协同减排情景,计算各情景下2015—2030年京津冀地区钢铁行业主要污染物(SO₂、NO_x、PM₁₀、PM_2.5、CO₂)的减排成本与效益,比较获取治污减排的最优路径方案.结果表明:①基于减排成本计算,规模-末端治理减排情景成本最低,分别为规模-结构、规模-技术减排情景投入的15.18%、23.94%;综合减排情景下治污减排潜力最大,但综合成本最高.②基于环境税效益评价方法、人群健康效益评价方法计算显示,人群健康效益评价方法计算的减排效益高于环境税效益评价方法,表明污染减排的潜在人群健康效益更高;基于两种减排效益方法,4种协同减排情景中综合减排效益分别为10.78×108、76.14×108元,高于规模-结构、规模-技术、规模-末端治理减排情景效益.③基于环境税效益评价方法,4种协同减排情景的效益-成本比表现为规模-末端治理减排情景(0.46) >规模-技术减排情景(0.24) >综合减排情景(0.15) >规模-结构减排情景(0.10);基于人群健康效益评价方法4种协同减排情景的效益-成本比依次为规模-末端治理减排情景(8.35) >综合减排情景(1.07) >规模-结构减排情景(0.57) >规模-技术减排情景(0.65),表明规模-末端治理减排情景的减排路径最优.研究显示,京津冀地区钢铁行业应基于环境质量底线目标要求,综合考虑减排潜力、减排成本与收益,以规模-末端治理为主要途径,选取协同减排的最优路径.