Response of PM2.5-bound elemental species to emission variations and associated health risk assessment during the COVID-19 pandemic in a coastal megacity

The coronavirus (COVID-19) pandemic is disrupting the world from many aspects. In this study, the impact of emission variations on PM_2.5-bound elemental species and health risks associated to inhalation exposure has been analyzed based on real-time measurements at a remote coastal site in Shanghai during the pandemic. Most trace elemental species decreased significantly and displayed almost no diel peaks during the lockdown. After the lockdown, they rebounded rapidly, of which V and Ni even exceeded the levels before the lockdown, suggesting the recovery of both inland and shipping activities. Five sources were identified based on receptor modeling. Coal combustion accounted for more than 70% of the measured elemental concentrations before and during the lockdown. Shipping emissions, fugitive/mineral dust, and waste incineration all showed elevated contributions after the lockdown. The total non-carcinogenic risk (HQ) for the target elements exceeded the risk threshold for both children and adults with chloride as the predominant species contributing to HQ. Whereas, the total carcinogenic risk (TR) for adults was above the acceptable level and much higher than that for children. Waste incineration was the largest contributor to HQ, while manufacture processing and coal combustion were the main sources of TR. Lockdown control measures were beneficial for lowering the carcinogenic risk while unexpectedly increased the non-carcinogenic risk. From the perspective of health effects, priorities of control measures should be given to waste incineration, manufacture processing, and coal combustion. A balanced way should be reached between both lowering the levels of air pollutants and their health risks.     

Long-term declining in carbon monoxide(CO) at a rural site of Beijing during 2006–2018 implies the improved combustion efficiency and effective emission control

Carbon monoxide(CO) is primarily the result of incomplete combustion, which has important impacts on the atmospheric chemical cycle and climate. Improved quantitative characterization of long-term CO trends is important for both atmospheric modeling and the design and implementation of policies to efficiently control multiple pollutants. Due to the limitations of high time-resolution and high-quality long-term observational data, studies on long-term trends in the CO concentration in China are q...     

离心状态下吊篮系统有限元模拟

目的研究吊篮在离心载荷下的力学行为,尤其是强度和刚度性能。方法通过精细化模拟吊篮系统各部件间的接触关系,在对某离心机吊篮初始设计方案进行模拟分析的基础上,开展吊篮的强度性能研究,对吊篮结构的整体布局、主要部件强度考核和降低局部应力集中等多方面开展计算分析。结果在指定工况下吊耳与配重板之间的局部接触导致的应力集中,致使安全系数达不到强度要求。结论提出改进措施,改进设计后的吊篮结构强度得到了较大的提高,满足吊篮设计的强度要求。     

三级AO耦合工艺低温污水处理脱氮机理

采用分段进水三级AO耦合流离生化工艺处理低温废水,在温度为(10±1)℃条件下,控制HRT为8h,进水流量分配比为3:2:1,污泥回流比为50%,考察耦合工艺对低温污水中污染物的去除效果、反应器内污染物变化规律、各级氮去除规律及系统硝化反硝化性能.研究表明:耦合工艺COD及NH₄⁺-N去除效率均超过90%,TN及TP去除效率达到80%,反应器内生物膜污泥浓度在400～800mg/L之间,系统各级NH₄⁺-N去除率均超过80%,缺氧反硝化脱氮率及好氧同步硝化反硝化脱氮率分别为50.15%和26.05%.受底物浓度及功能菌群数量影响,系统第二级比硝化速率及比反硝化速率均最高.     

Combination of heterogeneous Fenton-like reaction and photocatalysis using Co-TiO2 nanocatalyst for activation of KHSO5 with visible light irradiation at ambient conditions

A novel coupled system using Co–Ti O2 was successfully designed which combined two different heterogeneous advanced oxidation processes, sulfate radical based Fenton-like reaction（SR-Fenton） and visible light photocatalysis（Vis-Photo）, for degradation of organic contaminants. The synergistic effect of SR-Fenton and Vis-Photo was observed through comparative tests of 50 mg/L Rhodamine B（Rh B） degradation and TOC removal. The Rhodamine B degradation rate and TOC removal were 100% and 68.1% using the SR-Fenton/Vis-Photo combined process under ambient conditions, respectively. Moreover, based on XRD, XPS and UV-DRS characterization, it can be deduced that tricobalt tetroxide located on the surface of the catalyst is the SR-Fenton active site, and cobalt ion implanted in the Ti O2 lattice is the reason for the visible light photocatalytic activity of Co–Ti O2. Finally, the effects of the calcination temperature and cobalt concentration on the synergistic performance were also investigated and a possible mechanism for the synergistic system was proposed. This coupled system exhibited excellent catalytic stability and reusability,and almost no dissolution of Co2＋was found.     

基于GIS的贵州省茶园生态适宜性研究

通过利用GIS技术,在土地利用现状以及喀斯特空间分布的基础上初步划分茶叶种植适宜地和不适宜地。选择对茶叶生长密切相关的地形地貌(海拔、坡度、坡向)、气候条件(光、热、降水条件及空气相对湿度)及土壤条件(土壤pH值)等8个生态评价因子,通过专家打分确定各因子权重,应用GIS空间叠加分析模块实现贵州茶园生态适宜性评价。结果表明:贵州省适宜茶叶种植的面积为32417.00km2,占国土面积的18.40%,其中非常适宜种植茶叶的区域面积为10618.00km2,占国土面积的6.03%;适宜种植茶叶的区域面积为11554.00km2,占国土面积的6.56%;比较适宜种植茶叶的区域面积为10245.00km2,占国土面积的5.81%;不适宜种植茶叶的区域面积为143735.45km2,占国土面积的81.60%。以上评价结果将为贵州茶产业的大力发展提供科学依据和技术基础。     

连续流亚硝化中试反应器的启动及其能力提升

通过接种污水处理厂压滤后污泥,添加悬浮填料进行挂膜,采用连续流反应器处理模拟氨氮污水,对反应器的游离氨(FA)、游离亚硝酸(FNA)以及溶解氧(DO)进行调控,实现了中试亚硝化反应器的成功启动.结果表明,通过前期高DO,后期低DO的运行模式,并对反应器运行过程中的FA、FNA进行调控实现了AOB的富集和NOB的淘汰,启动成功后反应器内部亚硝酸盐产生速率(NPR)达到1.27 kg·(m~3·d)~(-1),亚硝酸盐积累率(NAR)也稳定在98%.采用实时荧光定量PCR方法(quantitative real time PCR,q PCR)对启动初期和成功启动后反应器中的功能微生物(AOB、NOB)进行分析,q PCR结果表明反应功能微生物AOB的拷贝数从启动初期的5.3×10~9copies·m L~(-1)增长到1.6×10~(11)copies·m L~(-1),NOB的拷贝数反而从1.1×10~(10)copies·m L~(-1)下降到1.2×10~9copies·m L~(-1),AOB拷贝数的数量级比NOB的要高2个数量级,这也是在启动过程中通过DO、FA、FNA等措施对NOB联合抑制的作用.     

出水水头对自生生物动态膜过滤性能的影响

增加出水水头不利于自生生物动态膜(SFDM)的恢复.随着恢复期出水水头的增加,SFDM的稳定出水通量逐渐达到一个极限通量,约为35L·(m²·h)^-1.继续增大出水水头,稳定出水通量甚至有降低的趋势在相同的出水通量下,动态膜的稳定运行时间随着恢复期出水水头的增加而显著降低.当恢复期出水水头为0.5cm时,稳定运行的时间＞10d,当恢复期出水水头为10cm时,稳定运行时间＜5h.研究了产生上述现象的原因,并提出使每个过滤周期从出水水头为0处开始的操作策略.     

浅谈电梯门回路检测功能

《电梯监督检验和定期检验规则——曳引与强制驱动电梯》TSG T7001—2009第2号修改单增加了门回路检测功能,防止电梯正常运行状态下厅门或轿门门锁电气安全装置被短接。本文对电梯门回路检测功能的原理进行分析,结合笔者的实际工作经验,浅谈门回路检测功能的检验和可能带来的风险。     

包覆型纳米零价铁的制备及其去除水中的活性艳蓝

采用流变相法,以FeSO4.7H2O∶KBH4=1∶2(摩尔比)为固相介质,0.06 g/mL CMC(羧甲基纤维素)水溶液为液相介质,固液比1∶2,反应2 h制备出包覆型纳米零价铁;采用XRD、TEM等手段对合成的纳米零价铁进行表征。探讨不同反应条件对包覆型纳米铁去除活性艳蓝的影响。实验结果表明,初始活性艳蓝(浓度100 mg/L)pH为5,包覆型纳米铁的投加量为6 g/L,反应时间为30 min时,活性艳蓝的去除率可达96%。通过研究机理,其吸附过程符合二级吸附动力学,降解过程符合一级反应动力学。