Modeling 4-Chlorophenol Removal from Aqueous Solutions by Granular Activated Carbon

Since phenols and phenolic compounds in many industrial wastewaters are toxic organic contaminants for humans and aquatic life, to remove these compounds via the most efficient way is very important for environmental remediation treatment. In this context, almost all of the isotherm models (Freundlich, Langmuir, Temkin, Redlich–Peterson, Sips, and Khan) for adsorption in the literature were applied to explain the adsorption mechanism of 4-chlorophenol on activated carbon in this study. Also theoretical modeling data were obtained using model equations; interpolation and analysis of variance were made to compare data by using statistics software. In addition, the thermodynamic and kinetic studies for adsorption mechanism were included in the article. The adsorption of 4-chlorophenol on activated carbon fits well to the pseudo-first-order kinetic model than the pseudo-second-order, intraparticular diffusion and Bangham models. It is also indicated that 4-chlorophenol adsorption by granular activated carbon would be attributed to a type of transition between physical and chemical adsorption rather than a pure physical or chemical adsorption process. As a result, an environmental remediation problem and the adsorption mechanism on activated carbon that can be regarded as a solution to this problem are described and explained using the mathematical models and calculations in this study.     

Anatomical element localization by EDXS in Grevillea exul var. exul under nickel stress

Grevillea exul var. exul, an endemic serpentinic Proteaceae of New Caledonia, was chosen to study the spatial distribution of Ni because this species supports strong content of metals, which can allow important absorptions thus detectable by microanalysis. Fine transversal sections of axenic G. exul var. exul plants grown during 15 days on nickel sulphate medium were examined by EDXS microanalysis. It showed that in Ni treated plants, Ni was concentrated mostly in the phloem compared to the xylem and the epidermis, either in roots or in the basal part of the stems and was mostly in the epidermis in the upper part of the stems and not detectable in the leaves. This metal took the place of P and K in the treated plants whereas the localization of these macroelements was quite uniform in control sections. We assume that a mechanism of phloem loading is implicated to restrict Ni accumulation in G. exul var. exul.     

Prenatal diagnosis of autosomal recessive osteopetrosis,infantile type,by X-ray evaluation

Prenatal diagnosis for infantile osteopetrosis was attempted during the third pregnancy of a first-cousin marriage whose family history revealed an affected previous child. At the 25th week of pregnancy, fetal X-ray evaluation revealed marked sclerosis of osteopetrotic bone and metaphyseal splaying and clubbing of both femurs. The pregnancy was terminated and repeated X-rays and histopathological examination of fetal bone (femur) confirmed the diagnosis.     

Biotransformation of phenylurea herbicides by a soil bacterial strain, Arthrobacter sp. N2: structure, ecotoxicity and fate of diuron metabolite with soil fungi

In order to assess the influence of the aromatic substitution on the ability of a soil bacterial strain, Arthrobacter sp. N2, to degrade phenylurea herbicides, biotransformation assays were performed in mineral medium with resting cells of this soil bacterial strain on three phenylurea herbicides (diuron, chlorotoluron and isoproturon). Each herbicide considered, led to the formation of only one metabolite detected by HPLC analysis. After isolation, the metabolites were identified by NMR and MS, as the corresponding substituted anilines. According to the Microtox test (realized on the bacterium Vibrio fischeri), these metabolites presented non-target toxicity far more important (up to 600 times higher for 4-isopropylaniline) than the parent molecule. For isoproturon and chlorotoluron, the amount of substituted anilines obtained at the end of the biotransformation was very low, whereas the biotransformation of diuron into 3,4-dichloroaniline was almost quantitative. In this last case, the degradation product accumulated in the medium. In soil, other microorganisms are present that might degrade it. So the biotransformation of 3,4-dichloroaniline was then tested with four fungal strains: Aspergillus niger, Beauveria bassiana, Cunninghamella echinulata var. elegans and Mortierella isabellina. The aniline was further transformed with all the microorganisms tested. Only one metabolite was detected by HPLC analysis and after isolation, it was identified to be 3,4-dichloroacetanilide. This acetylated compound led to biological effects less important on V. fischeri than 3,4-dichloroaniline. These results stress the importance of identifying the degradation products to assess the impact of a polluting agent. Indeed, the pollutant may undergo transformation yielding compounds more toxic than the parent molecule.     

Pyrolysis kinetics and residue characteristics of petrochemical industrial sludge

This study investigated the pyrolysis characteristics of sludge from wastewater treatment plants in the petrochemical industry and focused on the pyrolysis kinetics, elemental composition of residue, and volatile organic compounds (VOCs) of exhaust gas. As pyrolysis temperature increased to 773 K, the increasing rate of crude oil production tended to a stable condition. The result indicated that the optimal temperature of crude oil and water mixed production was 773 K. When pyrolysis temperature increased from 673 to 973 K, carbon, oxygen, nitrogen, and hydrogen concentrations of residue decreased and the sulfur concentration of residue increased. The concentrations of benzene, toluene,ethylbenzene, and styrene increased by the increasing pyrolysis temperature. We found that the reaction order of sludge pyrolysis was 2.5 and the activation energy of the reaction was 11.06 kJ/mol. We believe that our pyrolysis system is transitional between devolatilization and combustion.     

The life history responses of the abalone pest,<Emphasis Type="Italic"> Terebrasabella heterouncinata</Emphasis>, under natural and aquaculture conditions

The sabellid, Terebrasabella heterouncinata, is a small (<5 mm) intratubular brooder that lives in burrows within the hosts shell matrix. It is a semi-continuous breeder and despite producing small numbers of large eggs, infestation by this animal has reached epidemic proportions on local abalone farms. The present study compared the morphometrics and reproductive characteristics of worms from farmed and wild abalone, in the Walker Bay area of the south Western Cape Province of South Africa, to gain insights into why this animal has become so successful under aquaculture conditions. The farms designated farm A and farm B each had one on-farm site, and two wild sites, while farm C had two on-farm sites and two wild sites. The wild sites were natural abalone habitats located within 2.5 km of the farms. Our results conclusively showed that environmental conditions prevalent on the farms enhanced the reproductive success of these worms relative to that observed in its natural environment. At farms B and C, worms occurred in significantly higher densities at the on-farm sites than in the corresponding wild samples, but at farm A, density was equally low at the three sites. At all three farms, a greater proportion of the population was reproductively active in the on-farm samples than in the wild samples. Worms on farmed abalone had a higher instantaneous fecundity, brooded more clutches simultaneously and were larger than their conspecifics from the wild. There was a positive correlation between adult size and brood size and the number of clutches brooded simultaneously. Within the three on-farm sites there was a negative correlation between egg volume and brood size, indicating a trade-off between these traits. However, such a trade-off was not apparent between sites, with brood size being higher at the on-farm sites than at the wild sites, irrespective of egg size. This suggests that the stable nutrient-enriched environment on the farm led to an increase in fecundity without compromising the size (and implicitly the quality) of the eggs. Worm density did not have a significant effect on body size or any other reproductive traits at most sites, and the density of T. heterouncinata was unaffected by the density of other shell-infesting polychaetes. The results suggest that the farm environment has selected for larger, more fecund worms that breed rapidly with high recruitment success as a consequence of abundant nutrients, high host density, habitat stability and a possible lack of predation and interspecific competition.Communicated by J.P. Thorpe, Port Erin     

Ingestion of bivalve larvae by<Emphasis Type="Italic"> Mytilus edulis</Emphasis>: experimental and field demonstrations of larviphagy in farmed blue mussels

Ingestion of bivalve larvae by Mytilus edulis was investigated. Laboratory experiments revealed that ~ 90% of bivalve larvae offered to mussels was ingested and apparently fully digested. The shell of the bivalve larvae offered no protection against digestive processes, resulting in high larval mortality once inside the stomach. Stomach content analysis (September 2001–January 2003) showed that bivalve larvae were ingested by farmed mussels year-round, with the exception of March 2002. Numbers of ingested larvae were highest in October 2001 and May 2002, which coincides with known spawning times of farmed mussels in Ireland. Mussels ingested a large size-range of bivalve larvae, suggesting that all stages of the bivalve life cycle are vulnerable to predation. It is suggested that adult bivalves routinely filter larvae from the surrounding water and that, given the high biomass of mussels present in mussel farms, filtration by adult bivalves significantly reduces numbers of bivalve larvae in nearby waters.Communicated by J.P. Thorpe, Port Erin     

A decision support system for assessing landfill performance

Designing environmentally sound landfills is a challenging engineering task due to complex interactions of numerous design variables; such as landfill size, waste characteristics, and site hydrogeology. Decision support systems (DSS) can be utilized to handle these complex interactions and to aid in a performance-based landfill design by coupling system simulation models (SSM). The aim of this paper is to present a decision support system developed for a performance-based landfill design. The developed DSS is called Landfill Design Decision Support System – LFDSS. A two-step DSS framework, composed of preliminary design and detailed design phases, is set to effectively couple and run the SSMs and calculation modules. In preliminary design phase, preliminary design alternatives are proposed using general site data. In detailed design phase, proposed design alternatives are further simulated under site-specific data using SSMs for performance evaluation. LFDSS calculates the required landfill volume, performs landfill base contour design, proposes preliminary design alternatives based on general site conditions, evaluates the performance of the proposed designs, calculates the factor of safety values for slope stability analyses, and performs major cost calculations. The DSS evaluates the results of all landfill design alternatives, and determines whether the design satisfies the predefined performance criteria. The DSS ultimately enables comparisons among different landfill designs based on their performances (i.e. leachate head stability, and groundwater contamination), constructional stability and costs. The developed DSS was applied to a real site, and the results demonstrated the strengths of the developed system on designing environmentally sound and feasible landfills.     

Long-term drivers of persistence and colonization dynamics in spatially structured amphibian populations

Many organisms live in networks of local populations connected by dispersing individuals, called spatially structured populations (SSPs), where the long-term persistence of the entire network is determined by the balance between 2 processes acting at the scale of local populations: extinction and colonization. When multiple threats act on an SSP, a comparison of the different factors determining local extinctions and colonizations is essential to plan sound conservation actions. We assessed the drivers of long-term population dynamics of multiple amphibian species at the regional scale. We used dynamic occupancy models within a Bayesian framework to identify the factors determining persistence and colonization of local populations. Because connectivity among patches is fundamental to SSPs dynamics, we considered 2 measures of connectivity acting on each focal patch: incidence of the focal species and incidence of invasive crayfish. We used meta-analysis to summarize the effect of different drivers at the community level. Persistence and colonization of local populations were jointly determined by factors acting at different scales. Persistence probability was positively related to the area and the permanence of wetlands, whereas it was negatively related to occurrence of fish. Colonization probability was highest in semipermanent wetlands and in sites with a high incidence of the focal species in nearby sites, whereas it showed a negative relationship with the incidence of invasive crayfish in the landscape. By analyzing long-term data on amphibian population dynamics, we found a strong effect of some classic features commonly used in SSP studies, such as patch area and focal species incidence. The presence of an invasive non-native species at the landscape scale emerged as one of the strongest drivers of colonization dynamics, suggesting that studies on SSPs should consider different connectivity measures more frequently, such as the incidence of predators, especially when dealing with biological invasions.