沉管隧道接头地震动力响应分析

以港珠澳桥隧工程中的沉管隧道为工程实例,建立沉管隧道部分管段的三维有限元模型,并采用ABAQUS有限元软件对其进行动力计算。计算中考虑了地基土层的初始应力平衡和地基无限域的辐射阻尼效应影响,地震作用通过基岩运动以惯性力方式施加,分析了隧道管段及沉管接头部位的应力和位移。在水平向和竖直向地震共同作用下,管节的竖向相对位移要比水平向大很多;沉管接头附近的管节单元具有较大的应力,主要是由于接头材料发生变化,容易发生应力集中现象。计算结果可供沉管隧道设计参考。     

Assessment of potential dermal and inhalation exposure of workers to the insecticide imidacloprid using whole-body dosimetry in China

In China, although improvements to the pesticide registration process have beenmade in last thirty years, no occupational exposure data are required to obtain a commercial license for a pesticide product. Consequently, notably little research has been conducted to establish an exposure assessment procedure in China. The present study monitored the potential dermal operator exposure from knapsack electric sprayer wheat field application of imidacloprid in Liaocheng City, Shandong Province and in Xinxiang City, Henan Province, China, using whole-body dosimetry. The potential inhalation exposure was determined using a personal air pump and XAD-2 sample tubes. The analytical method was developed and validated, including such performance parameters as limits of detection and quantification, linear range, recovery and precision. The total potential dermal and inhalation exposures were 14.20, 16.80, 15.39 and 20.78 mL/hr, respectively, for the four operators in Liaocheng and Xinxiang, corresponding to 0.02% to 0.03% of the applied volume of spray solution. In all trials, the lower part (thigh, lower leg) of the body was the most contaminated, accounting for approximately 76% to 88% of the total exposure. The inhalation exposure was less than 1% of the total exposure. Such factors as the application pattern, crop type, spray equipment, operator experience and climatic conditions have been used to explain the exposure distribution over the different parts of the body. As indicated by the calculated Margin of Exposure, the typical wheat treatment scenarios when a backpack sprayer was used are considered to be safe in terms of imidacloprid exposure.     

A 1-dodecanethiol-based phase transfer protocol for the highly efficient extraction of noble metal ions from aqueous phase

A 1-dodecanethiol-based phase-transfer protocol is developed for the extraction of noble metal ions from aqueous solution to a hydrocarbon phase, which calls for first mixing the aqueous metal ion solution with an ethanolic solution of 1-dodecanethiol, and then extracting the coordination compounds formed between noble metal ions and 1-dodecanethiol into a non-polar organic solvent. A number of characterization techniques, including inductively coupled plasma atomic emission spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis demonstrate that this protocol could be applied to extract a wide variety of noble metal ions from water to dichloromethane with an efficiency of >96%, and has high selectivity for the separation of the noble metal ions from other transition metals. It is therefore an attractive alternative for the extraction of noble metals from water, soil, or waste printed circuit boards.     

Mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor

In this study, the mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor were investigated through thermal decomposition methods. The results show that the mercury adsorption performance of the HBr-modified fly ash was enhanced significantly. The mercury species adsorbed by unmodified fly ash were HgCl₂, HgS and HgO. The mercury adsorbed by HBr-modified fly ash, in the entrained-flow reactor, existed in two forms, HgBr₂ and HgO, and the HBr was the dominant factor promoting oxidation of elemental mercury in the entrained-flow reactor. In the current study, the concentration of HgBr₂ and HgO in ash from the fine ash vessel was 4.6 times greater than for ash from the coarse ash vessel. The fine ash had better mercury adsorption performance than coarse ash, which is most likely due to the higher specific surface area and longer residence time.     

滁州地区覆盖层厚度对场地地震动参数的影响

以滁州地区近百个钻孔资料为原型建立土层模型,采用一维频域等效线性化波动方法进行了土层地震反应分析,重点分析了覆盖层厚度对场地地震动参数的影响。研究结果表明,随着覆盖层厚度的增加,地表峰值加速度及土层放大系数逐渐增大,当覆盖层厚度超过一定值时,地表峰值加速度及土层放大系数呈逐渐缓慢减小的趋势;而反应谱特征周期总体上随着覆盖层厚度的增加而逐渐增大。     

基于致灾因子指标体系的海冰灾害风险评估和区划方法

中国是世界上受海冰危害严重的国家之一,历史上曾发生过多次严重海冰灾害,造成重大损失。根据我国结冰海区海冰灾害风险的自然过程、社会经济状况和成灾机制,综合考虑致灾因子危险性、承灾体分类、分布及脆弱性以及防灾减灾能力等因素,对海冰灾害发生的可能性及其不确定性等进行综合分析,提出了开展海冰灾害风险评估和区划的理论依据,同时给出了利用致灾因子指标体系对海冰灾害风险进行评估和区划的具体方法。     

Magnesium-rich minerals in sediment and suspended particulates of South Florida water bodies: implications for turbidity

Fine sediments in shallow water bodies such as Lake Okeechobee are prone to resuspension. Predominantly inorganic "mud" sediment that covers approximately 670 km2 of the lake has been recognized as a persistent source of turbidity. The objective of this study was to determine if mineral components of sediments in Lake Okeechobee and water conveyances of the northern Everglades also occur as suspended sediment and hence constitute a potential abiotic contributor to turbidity. Sediment samples were collected from nine stations within the lake and eight locations north of Water Conservation Area 2A in the Everglades. Water samples were also collected at selected locations. The silt and clay mineralogy of sediment and suspended particles was determined using X-ray diffraction, thermogravimetry, scanning-electron microscopy, energy-dispersive X-ray elemental microanalysis, and high-resolution transmission-electron microscopy. Clay fractions of the lake sediment contained the Mg silicate minerals sepiolite and palygorskite, along with smectite, dolomite, calcite, and kaolinite. Sediment silt fractions were dominated by carbonates and/or quartz, with smaller amounts of Ca phosphates and sepiolite. Mineralogy of the mud sediment was similar to that reported for geologic phosphate deposits. This suggests that the mud sediment might have accumulated by stream transport of minerals from these deposits. Suspended solids and mud-sediment mineralogy were similar, except that smectite was more abundant in suspended solids. Everglade samples also contained Mg-rich minerals. The small size, low density, and fibrous or platy nature of the prevalent mud sediment minerals make them an abiotic, hydrodynamically sensitive source of persistent turbidity in a shallow lake. Mitigation efforts focused exclusively on P-induced biogeochemical processes do not address the origin or effects of these minerals. Ecological management issues such as turbidity control, P retention, geologic P input, and suitability of dredging are related to mud-sediment properties and provenance.     

Integration of chemical and biological methods: A case study of polycyclic aromatic hydrocarbons pollution monitoring in Shandong Peninsula, China

Polycyclic aromatic hydrocarbons(PAHs), as persistent toxic substances(PTS), have been widely monitored in coastal environment, including seawater and sediment. However, scientific monitoring methods, like ecological risk assessment and integrated biomarker response, still need massive researches to verify their availabilities. This study was performed in March, May, August and October of 2018 at eight sites, Yellow River estuary(S1), Guangli Port(S2), Xiaying(S3), Laizhou(S4), Inner Bay(S5), Ou...     

Interactions between lead(II) ions and dissolved organic matter derived from organic fertilizers incubated in the field

This work was to study composition characteristics and the subsequent effect on the lead (Pb) binding properties of dissolved organic matter (DOM) derived from seaweed-based (SWOF) and chicken manure organic fertilizers (CMOF) during a one-year field incubation experiment using the excitation-emission matrix-parallel factor (EEM-PARAFAC) and two-dimensional correlation spectroscopy (2DCOS) analysis. Results showed that high aromatic and hydrophobic fluorescent substances were enriched in CMOF-derived DOM and SWOF-derived DOM and enhanced over time. And phenolic groups in the fulvic-like substances for SWOF-derived DOM and carboxyl groups in the humic-like substances for CMOF-derived DOM had the fastest responses over time, respectively. Moreover, both non-fluorescent polysaccharides and fluorescent humic-like substances or fulvic-like substances with aromatic (C=C) groups first participated in the binding process of Pb to SWOF-derived DOM on day 0 and 180 during the lead binding process. In contrast, humic-like substances associated with aromatic (C=C) and phenolic groups gave a faster response to Pb binding on day 360. Regarding CMOF-derived DOM, the fulvic-like substances associated with aromatic (C=C) and carboxylic groups displayed a faster response to Pb ions on day 0. Nonetheless, polysaccharides and humic-like associated with phenolic groups had a faster response on days 180 and 360. It is noteworthy that the polysaccharides, which participated in Pb binding to CMOF-derived DOM, posed a higher risk of Pb in the environment after 360 days. Therefore, these findings gave new insights into the long-term applications of commercial organic fertilizers for the amendment of soil.     

Chemical characterization and source identification of PM2.5 in Luoyang after the clean air actions

Luoyang is a typical heavy industrial city in China, with a coal-dominated energy structure and serious air pollution. Following the implementation of the clean air actions, the physicochemical characteristics and sources of PM_2.5 have changed. A comprehensive study of PM_2.5 was conducted from October 16, 2019 to January 23, 2020 to evaluate the effectiveness of previous control measures and further to provide theory basis for more effective policies in the future. Results showed that the aerosol pollution in Luoyang in autumn and winter is still serious with the average concentration of 91.1 μg/m³, although a large reduction (46.9%) since 2014. With the contribution of nitrate increased from 12.5% to 25.1% and sulfate decreased from 16.7% to 11.2%, aerosol pollution has changed from sulfate-dominate to nitrate-dominate. High NO₃⁻/SO₄²⁻ ratio and the increasing of NO₃⁻/SO₄²⁻ ratio with the aggravation of pollution indicating vehicle exhaust playing an increasingly important role in PM_2.5 pollution in Luoyang, especially in the haze processes. Secondary inorganic ions contributed significantly to the enhancement of PM_2.5 during the pollution period. The high value of Cl⁻/Na⁺ and EC concentration indicate coal combustion in Luoyang is still serious. The top three contributor sources were secondary inorganic aerosols (33.3%), coal combustion (13.6%), and industrial emissions (13.4%). Close-range transport from the western and northeastern directions were more important factors in air pollution in Luoyang during the sampling period. It is necessary to strengthen the control of coal combustion and reduce vehicle emissions in future policies.