利用大型土柱自然淋溶条件下研究土壤重金属的迁移及形态转化

为研究不同重金属在土壤中的迁移和形态转化,通过分层填装土柱,在土柱0~5 cm深度范围内添加Pb、Ag、Bi、In、Sb和Sn等重金属污染土壤,并在自然条件下淋溶4 a,分析各重金属在红壤、潮土、黑土和砂土中的迁移速率及其形态组成. 结果表明:①在>30 cm深度范围内,红壤、潮土和黑土中各重金属质量分数与其相应本底值相比变化不大;与试验前土壤相比,砂土整个剖面中6种重金属质量分数均较高. ②6种重金属在4种土壤中的残留率表现为砂土<潮土<黑土<红壤;对于0～10 cm土壤中Pb的残留率,在潮土中大于Ag和Sb,在黑土中大于Ag,在红壤中大于In,在砂土中则大于Sn. ③模拟试验后残留在土柱中的重金属主要分布在土壤表层(0～30 cm),而深层(>30 cm)较少;6种重金属在红壤、潮土、黑土和砂土中的残留率平均值分别为98.0%、65.1%、65.9%和56.5%. ④与添加污染土壤之前相比,试验后土壤中残渣态等稳定形态重金属质量分数较低,其中Pb、In和Sb均以碳酸盐结合态和有机金属络合态为主,Ag和Sn分别以有机金属络合态、双氧水可提取有机结合态和有机金属络合态、无定形铁锰氧化物结合态为主,而Bi则以碳酸盐结合态和双氧水可提取有机结合态为主. 结果显示,红壤中Pb的迁移风险较低,潮土和黑土中Ag、Sb的迁移风险较高,而砂土中Sn和Sb的迁移风险需要格外关注.      

北长山岛海水入侵成因机理及现状评价

受全球气候变化影响,海水入侵已成为海岛地区普遍面临的地质灾害,严重制约海岛的开发与利用。本文以北长山岛为例,通过对不同含水层野外现场取样分析与高密度电法测试,探讨该地区海水入侵的成因机制与主要影响因素,并结合前人研究成果对该地区海水入侵现状进行评估。研究成果可为防治海水入侵灾害以及北长山岛地下水资源开发和管理提供科学依据。     

应急场景下个体生理指标变化研究

搭建了应急场景下个体反应测试系统,利用BSL数据采集仪测试了35名样本人员应急前后收缩压、舒张压、心率、呼吸速率等生理指标的变化特征,并对个体应急处置能力进行了评估。结果表明:应急场景下,个体生理指标与其应急处置能力有密切关系,专业知识及工作经验越丰富的被测试者其各生理指标波动越小、应急处置指数也越小。研究结果可为企业员工应急处置能力的评估和提高提供依据。     

节能耐磨型电梯导靴靴衬应用研究

很多电梯使用的导靴靴衬存在容易磨损的问题,从而导致电梯运行中的抖动和不平稳现象,影响乘坐的舒适性。常用的靴衬材料摩擦系数偏大,造成电梯运行过程中摩擦力偏大,能耗增加。因此对这类电梯的导轨与导靴间的摩擦行为进行研究,将新型复合材料应用于电梯靴衬,实现减摩以降低能耗,提升靴衬的耐磨性,延长使用寿命,降低成本,具有较大的实际意义和应用价值。     

台州电子垃圾循环区域母乳中多氯联苯的污染现状

本文对浙江省台州市路桥和温岭两个电子垃圾循环区域母乳中多氯联苯(PCBs)污染现状进行了研究.路桥本地人群(n=16)、温岭本地人群(n=27)及在台州居住不足5年的外地人群(n=9)母乳中PCBs的中值浓度分别为195 ng·g-1脂重(lw)、138 ng·g-1lw和59.1 ng·g-1lw.路桥和温岭人群母乳中PCBs浓度显著高于在台州居住不足5年的外地人群(P<0.001),也远高于浙江省及中国背景区域水平.CB-118、CB-153和CB-138是台州母乳中最主要的3种同类物,与台州膳食样本中PCBs的指纹特征类似.路桥本地人群婴儿通过饮用母乳日摄入的PCBs量(EDI)(1024 ng·kg-1bw·d-1)略高于加拿大卫生部建议的成人对PCBs日耐受量(1000 ng·kg-1bw·d-1),温岭本地人群乳儿的EDI值(491 ng·kg-1bw·d-1)远高于我国12个省市EDI的均值(54.6 ng·kg-1bw·d-1),表明台州本地人群母乳喂养的婴儿处于较高的PCBs暴露风险中.母乳中PCBs浓度与母亲年龄、孕前体重指数、产次和婴儿的体重及性别无显著相关性.     

聚合氯化铝铁在纺织印染废水处理中的应用

主要探讨聚合氯化铝铁（PAFC）在纺织印染废水处理的应用,并对影响絮凝效果的主要因素,如投加量、pH值等进行研究,找出最佳反应条件.     

深圳市中心城区VOCs污染特征与臭氧来源量化分析

文章利用莲花山生态监测站污染物观测数据与近地面气象数据,分析了2018年9月21日～10月18日深圳市出现连续臭氧(O3)污染过程期间,城区挥发性有机物(VOCs)体积分数与活性的变化特征;同时结合光化学箱模型对深圳市O3污染来源进行了量化分析.研究发现:阴雨天VOCs局地累积效应增强,O3生成主要受限于光照条件;偏东...     

估算天津环境中γ-HCH归宿的逸度模型

以全天津市为研究区域,利用稳态假设的逸度模型,用Matlab软件计算了γ-HCH(林丹)在环境各相中的浓度和相间迁移通量.γ-HCH在天津气、水、土壤、沉积物、鱼、作物、蔬菜各相中的浓度分别为1.57×10^-11、7.95×10^-7、1.17 × 10^-4、4.58×10^-4、6.03×10^-4、1.60×10^-4和6.42×10^-5mol/m³,在数量级上与实测值吻合很好.估算结果表明农业施用和农药厂废水是该地区环境中γ-HCH最主要的来源,最大的汇是土壤和沉积相(占环境中总量的99%),最主要的迁移过程是水-沉、气-土的扩散和沉降,土壤和沉积物中的降解是γ-HCH消失的最主要途径.     

Preliminary study of groundwater denitrification using a composite membrane bioreactor

A composite membrane bioreactor (CMBR) integrating the immobilized cell technique and the membrane separation technology was developed for groundwater denitrification. The CMBR had two well mixed compartments with one filled with the nitrate- containing influent and the other with a dilute ethanol solution; the compartments were separated by the composite membrane consisting of a microporous membrane facing the influent and an immobilized cell membrane facing the ethanol solution. Nitrate and ethanol molecules diffused from the respective compartments into the immobilized cell membrane where nitrate was reduced to gaseous nitrogen by the denitrifying bacteria present there with ethanol as the carbon source. The microporous membrane was attached to one side of the immobilized cell membrane for retention of the disaggregated bacteria. Relative to the single dose of external ethanol, the two-dose supplementation produced better treatment results as evidenced by the lower concentrations of NO3--N and ethanol (as measured by total organic carbon) of the effluent. The batch treatment in CMBR removed most of the nitrate in the influent and attained a stable denitrification rate of 0.1 g·m^-2·h^-1 for most of the 96-h cycles during the 30-cycle study. The effluent was essentially free of ethanol and nitrite nitrogen.     

Melt Strength and Rheological Properties of Biodegradable Poly(Lactic Aacid) Modified via Alkyl Radical-Based Reactive Extrusion Processes

Poly(lactic acid) (PLA) has been modified using twin-screw reactive extrusion to improve its melt properties and crystallinity. In this work lauroyl peroxide was used as an alkyl free radical source, abstracting hydrogen atoms from the PLA backbone leading to branching and chain extension reactions. Once the linear viscoelastic region was determined for these polymers, changes in dynamic rheology (dynamic viscosity real and loss modulus) were measured. Gel permeation chromatography showed that the molecular weight and polydispersity increased to a maximum with the addition of 1.00 and 0.50?wt% peroxide, respectively. Low temperature ?? transitions in dynamical mechanical thermal traces gave further evidence that branching had also occurred. G?ttfert Rheotens measurements showed a three fold increase in melt strength due to both increased chain length and branching. Thermal analysis showed the level of crystallisation had decreased also possibly due to branching. Reductions in crystallinity and improved melt strength are known to be critical for film and foam formation.