Nitrate,sulphate and chloride contents in public drinking water supplies in Sicily,Italy

Water samples collected from public drinking water supplies in Sicily were analysed for electric conductivity and for their chloride, sulphate and nitrate contents. The samples were collected as uniformly as possible from throughout the Sicilian territory, with an average sampling density of about one sample for every 7,600 inhabitants. Chloride contents that ranged from 5.53 to 1,302 mg/l were correlated strongly with electric conductivity, a parameter used as a proxy for water salinity. The highest values are attributable to seawater contamination along the coasts of the island. High chloride and sulphate values attributable to evaporitic rock dissolution were found in the central part of Sicily. The nitrate concentrations ranged from 0.05 to 296 mg/l, with 31 samples (4.7% of the total) exceeding the maximum admissible concentration of 50 mg/l. Anomalous samples always came from areas of intensive agricultural usage, indicating a clear anthropogenic origin. The same parameters were also measured in bottled water sold in Sicily, and they all were within the ranges for public drinking water supplies. The calculated mean nitrate intake from consuming public water supplies (16.1 mg/l) did not differ significantly from that of bottled water (15.2 mg/l). Although the quality of public water supplies needs to be improved by eliminating those that do not comply with the current drinking water limits, at present it does not justify the high consumption of bottled water (at least for nitrate contents).     

Effects of selected metal oxide nanoparticles on Artemia salina larvae: evaluation of mortality and behavioural and biochemical responses

The aim was to investigate the toxicity of selected metal oxide nanoparticles (MO-NPs) on the brine shrimp Artemia salina, by evaluating mortality and behavioural and biochemical responses. Larvae were exposed to tin(IV) oxide (stannic oxide (SnO₂)), cerium(IV) oxide (CeO₂) and iron(II, III) oxide (Fe₃O₄) NPs for 48 h in seawater, with MO-NP suspensions from 0.01 to 1.0 mg/mL. Mortality and behavioural responses (swimming speed alteration) and enzymatic activities of cholinesterase, glutathione-S-transferase and catalase were evaluated. Although the MO-NPs did not induce any mortality of the larvae, they caused changes in behavioural and biochemical responses. Swimming speed significantly decreased in larvae exposed to CeO₂ NPs. Cholinesterase and glutathione-S-transferase activities were significantly inhibited in larvae exposed to SnO₂ NPs, whereas cholinesterase activity significantly increased after CeO₂ NP and Fe₃O₄ NP exposure. Catalase activity significantly increased in larvae exposed to Fe₃O₄ NPs. In conclusion, swimming alteration and cholinesterase activity represent valid endpoints for MO-NP exposure, while glutathione-S-transferase and catalase activities appear to be NP-specific.     

Multicriteria optimisation of a simultaneous supercritical fluid extraction and clean-up procedure for the determination of persistent organohalogenated pollutants in aquaculture samples

A useful tool based on a single-step extraction and clean-up procedure for the determination of 15 organohalogenated pollutants (including brominated flame retardants) in aquaculture samples, using aluminium oxide basic and acidic silica gel in the supercritical extraction cell followed by gas chromatography with electron capture detection or mass spectrometry has been developed. This effective clean-up step ensures a minimum of chromatographic difficulties related to complex matrix components such as aquaculture feed. The extraction procedure has been screened by a fractional factorial design for the preliminary statistically significant parameters. The factors selected were extraction temperature, pressure, static extraction time, dynamic extraction time and carbon dioxide flow rate. The Doehlert design, followed by a multicriteria decision-making strategy, was then performed in order to determine the optimum conditions for the two most significant factors: pressure (165 bar) and dynamic extraction time (27 min). Under optimal conditions, the procedure developed with GC-MS/MS provides an excellent linearity, detection (0.01-0.2 ng g(-1)) and quantification limits (0.05-0.8 ng g(-1)) for most of the analytes investigated. The feasibility of the proposed supercritical fluid extraction method was validated by analysing two reference materials and fish feed and shellfish samples with satisfactory results.     

Terbuthylazine Contamination of the Aquifer North of Vicenza (North-East Italy) (5 pp)

- DOI: http://dx.doi/10.1065/espr2006.01.016 Background and Goal Agricultural practices can affect the quality of aquifers given that they are often located in cropped areas, so significant amounts of pesticides can be found in the water. In particular, triazine herbicides are always carefully checked by the official monitoring systems. The goal of this study was to find the mean concentration of terbuthylazine in an Italian aquifer and to set up a mass balance of this compound. Methods Terbuthylazine concentrations in the aquifer were measured in various check-wells during 1998–2004, and the value of censored data were estimated using a Gompertz inverse in order to evaluate the overall mean concentration. The total terbuthylazine load in the recharge area was calculated on the basis of surveys of cropped land and the main weed control techniques applied in the area. Data on aquifer water balance were obtained from previous studies. Results and Discussion The herbicide terbuthylazine applied in the recharge zone can be transported by surface water and enter the aquifer. Detected concentrations were always well below the EU drinking water limit and the fraction that can reach the groundwater under normal cropping practices is small, very likely less than 0.2%. Recommendations and Outlook The use and application rates of pesticides should be strictly regulated in recharge areas. Vegetated buffer strips can mitigate the impact of herbicides on surface water through reducing drift and early-spring runoff. Attention should also be paid to the fate of the main metabolites from soil biochemical processes.     

Sequential determination and chemical speciation analysis of inorganic As and Sb in airborne particulate matter collected in outdoor and indoor environments using slurry sampling and detection by HG AAS

Environmental Science and Pollution Research - In this work, fast sequential determination and chemical speciation analysis of inorganic arsenic and antimony in airborne particulate matter...     

Pyrolysis of WEEE plastics using catalysts produced from fly ash of coal gasification

Catalytic pyrolysis of thermoplastics extracted from waste electrical and electronic equipment (WEEE) was investigated using various fly ash-derived catalysts. The catalysts were prepared from fly ash by a simple method that basically includes a mechanical treatment followed by an acid or a basic activation. The synthesized catalysts were characterized using various analytical techniques. The results showed that not treated fly ash (FA) is characterized by good crystallinity, which in turn is lowered by mechanical and chemical treatment (fly ash after mechanical and acid activation, FAMA) and suppressed almost entirely down to let fly ash become completely amorphous (fly ash after mechanical and basic activation FAMB). Simultaneously, the surface area resulted increased. Subsequently, FA, FAMB and FAMA were used in the pyrolysis of a WEEE plastic sample at 400°C and their performance were compared with thermal pyrolysis at the same temperature. The catalysts principally improve the light oil yield: from 59 wt.% with thermal pyrolysis to 83 wt.% using FAMB. The formation of styrene in the oil is also increased: from 243 mg/g with thermal pyrolysis to 453 mg/g using FAMB. As a result, FAMB proved to be the best catalyst, thus producing also the lowest and the highest amount of char and gas, respectively.

Open image in new window

     

Sensitivity of hypogean and epigean freshwater copepods to agricultural pollutants

Widespread pollution from agriculture is one of the major causes of the poor freshwater quality currently observed across Europe. Several studies have addressed the direct impact of agricultural pollutants on freshwater biota by means of laboratory bioassays; however, as far as copepod crustaceans are concerned, the ecotoxicological research is scarce for freshwater species and almost nonexistent for the hypogean ones. In this study, we conducted a comparative analysis of the available literature data on the sensitivity of freshwater copepods to agricultural pollutants. We also assessed the acute and chronic sensitivity of a hypogean and an epigean species, both belonging to the Crustacea Copepoda Cyclopoida Cyclopidae, to two N-fertilizers (urea and ammonium nitrate) and two herbicides (ARIANE^TM II from Dow AgroSciences LLC, and Imazamox), widely used for cereal agriculture in Europe. According to the literature review, freshwater copepods are sensitive to a range of pesticides and N-fertilizers. Ecotoxicological studies on hypogean species of copepods account only one study. There are no standardized protocols available for acute and chronic toxicity tests for freshwater copepods, making comparisons about sensitivity difficult. From our experiments, ionized ammonia proved to be more toxic than the herbicide Imazamox, in both short and chronic bioassays. Urea was the less toxic chemical for both species. The hypogean species was more sensitive than the epigean one to all chemicals. For both species and for all tested chemicals, acute lethality and chronic lethality were induced at concentrations higher than the law limits of good water body quality in Europe, except for ionized ammonia, which provoked the chronic lethality of the hypogean species at a lower concentration. The hazardous concentration (HC) of un-ionized ammonia for 5 % of freshwater copepods, obtained by a species sensitivity distribution, was 92 μg l^?1, significantly lower than the HC computed for traditional test species from freshwater environments.     

Climate change impacts on critical international transportation assets of Caribbean Small Island Developing States (SIDS): the case of Jamaica and Saint Lucia

This contribution presents an assessment of the potential vulnerabilities to climate variability and change (CV & C) of the critical transportation infrastructure of Caribbean Small Island Developing States (SIDS). It focuses on potential operational disruptions and coastal inundation forced by CV & C on four coastal international airports and four seaports in Jamaica and Saint Lucia which are critical facilitators of international connectivity and socioeconomic development. Impact assessments have been carried out under climatic conditions forced by a 1.5 °C specific warming level (SWL) above pre-industrial levels, as well as for different emission scenarios and time periods in the twenty-first century. Disruptions and increasing costs due to, e.g., more frequent exceedance of high temperature thresholds that could impede transport operations are predicted, even under the 1.5 °C SWL, advocated by the Alliance of Small Island States (AOSIS) and reflected as an aspirational goal in the Paris Climate Agreement. Dynamic modeling of the coastal inundation under different return periods of projected extreme sea levels (ESLs) indicates that the examined airports and seaports will face increasing coastal inundation during the century. Inundation is projected for the airport runways of some of the examined international airports and most of the seaports, even from the 100-year extreme sea level under 1.5 °C SWL. In the absence of effective technical adaptation measures, both operational disruptions and coastal inundation are projected to increasingly affect all examined assets over the course of the century.     

Towards a sampling strategy for the assessment of forest condition at European level: combining country estimates

A correct characterization of the status and trend of forest condition is essential to support reporting processes at national and international level. An international forest condition monitoring has been implemented in Europe since 1987 under the auspices of the International Co-operative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP Forests). The monitoring is based on harmonized methodologies, with individual countries being responsible for its implementation. Due to inconsistencies and problems in sampling design, however, the ICP Forests network is not able to produce reliable quantitative estimates of forest condition at European and sometimes at country level. This paper proposes (1) a set of requirements for status and change assessment and (2) a harmonized sampling strategy able to provide unbiased and consistent estimators of forest condition parameters and of their changes at both country and European level. Under the assumption that a common definition of forest holds among European countries, monitoring objectives, parameters of concern and accuracy indexes are stated. On the basis of fixed-area plot sampling performed independently in each country, an unbiased and consistent estimator of forest defoliation indexes is obtained at both country and European level, together with conservative estimators of their sampling variance and power in the detection of changes. The strategy adopts a probabilistic sampling scheme based on fixed-area plots selected by means of systematic or stratified schemes. Operative guidelines for its application are provided.     

Linking mean pore velocity and dispersivity to pore velocity distribution by advection–dispersion and stream tube modeling

Environmental Fluid Mechanics - A large set of experimental solute tracer breakthrough data (corresponding to more than 350 individual tracer breakthrough curves) in eight granular filter...