Evaluation of an acid ammonium oxalate extraction to determine fluoride resident concentrations in soils

Fluoride depositions near aluminum smelters and other fluoride-emitting plants can lead to fluoride accumulation in soils, which constitutes a risk for ground water contamination. This study was conducted to investigate the capacity of a 0.2 M acid ammonium oxalate solution to selectively and quantitatively extract fluoride accumulated in soils. The recovery of fluoride added to three soils was evaluated following 7- to 28-d incubations. Oxalate extraction was also compared with a total fluoride extraction method, using oxalate-extractable fluoride (Fox) and total fluoride (Ftot) accumulation profiles derived from column percolation experiments. To determine low-level fluoride concentrations without interference from high Al and Fe concentrations, an adapted ion chromatography method was used. Following soil incubations, oxalate extracted 42 to 86% of added fluoride. Recovery varied between soils and, in one soil, increased with added fluoride concentration. Recovery was unaffected by incubation time. Maximum recovery was obtained in a soil high in amorphous Fe and Al, low in clay, and free of carbonate. Lower recoveries were obtained in soils with higher clay or carbonate contents. Only 4 to 8% of Ftot was extracted in untreated samples using Fox, which suggests a high selectivity of this method for added fluoride. In percolation experiments, the use of Fox reduced considerably the background noise associated with Ftot for the evaluation of fluoride accumulation profiles. Because of its high selectivity and despite incomplete fluoride recovery, the use of Fox to determine fluoride resident concentrations in soils may improve environmental monitoring of fluoride accumulation and movement in contaminated soils.     

CONTROL OF SUSPENDED SOLIDS AND PHYTOPLANKTON WITH FISHES AND A MUSSEL1

ABSTRACT: Filtering efficiency of the fathead minnow (Pimephales promelas), gizzard shad (Dorosoma cepedianum), carp (Cyprinus carpio), and a freshwater mussel (Elliptio coinpianata) was measured in field and laboratory trials to assess the ability of each species to control phytoplankton and suspended solid densities. All fish species tested were ineffective filterers and generally increased, rather than suppressed, algal and suspended solid concentrations. Filtering efficiencies of fish varied between -354 and 84 percent, depending on the size, shape, abundance, palatability, composition, and resistance to digestion of the particles. Because of poor filtering abilities, unpredictable feeding habits, and sensitivity to stress, the fish species examined are not effective biological controls in waste lagoons. In contrast, the freshwater mussel Elliptio was a highly effective control organism, averaging 66 percent filtering efficiency over a wide size range of algal and suspended particles. Filtration efficiency was positively correlated with mussel density. Elliptio was efficient at filtering small particles, which are particularly difficult to remove. Mean filtration rates ranged from 53 to 134 ml/mussel/h depending on the algal species consumed and algal densities (range 50–180,000 cells/ml) and 3 mg/L/mussel/h on suspended solids (range 14 to 112 mg/L). Water clarification was facilitated by both direct consumption and pseudofeces deposition. Elliptio and probably other mussel species can effectively control algae and suspended solids in wastewater lagoons and eutrophic lakes, if environmental conditions, especially dissolved oxygen levels, are suitable (>5 mg/L) for their survival.     

Application of a Dialysis Sampler to Monitor Phytoremediation Processes

A cylindrical dialysis sampler (1.2 m in length; 5 cm in diameter) was designed and constructed to sample small–scale phytoremediation processes in the root zone of poplar trees. The study site was a 183–tree plantation of hybrid poplars located at Aberdeen Proving Ground, Maryland, at the J–Field Area of Concern. The grove was planted in 1996 to intercept a chlorinated solvent plume containing 1,1,2,2–tetrachloroethane (1,1,2,2–TeCA, trichloroethene (TCE) and daughter products. Two dialysis samplers were installed: one directly in the poplar grove (approximately 0.3 m from the trunk of a mature tree) and the other outside of the grove but in the plume. Data collected included concentrations of chlorinated VOCs, organic acids, chloroacetic acids, Cl⁻, and dissolved gases (ethane, ethene, CH₄, CO₂). At the control location, the VOC profile was dominated by cis– 1,2–dichloroethene (cis–1,2–DCE) and trans–1,2–dichloroethene (trans–1,2–DCE) with concentrations ranging from 0.88-4.5 to 4.4-17.6 mg/L, respectively. Concentrations of VOCs were similar across the vertical profile. At the tree location, 1,1,2,2–TeCA and TCE were the dominant VOCs detected but as opposed to the control location were highly variable within the root zone, with the greatest variability associated with locations in the sampler where roots were observed. This highly variable profile at the tree location is indicative of VOC rhizosphere biodegradation and uptake near the active roots. This variability appears to be on the centimeter scale, emphasizing the importance of these high–resolution samplers for the study of rhizosphere influences.     

Brown rust disease control in winter wheat: I. Exploring an approach for disease progression based on night weather conditions

An empirical approach for simulating the infection and progress of leaf rust (caused by Puccinia triticina) during stem elongation on winter wheat was analysed for the 2000 to 2006 growing seasons. The approach was elaborated based on night weather conditions (i.e., air temperature, relative humidity and rainfall) and leaf rust occurrences. Data from three consecutive cropping seasons (2000–2002) at four representative sites of the Grand-Duchy of Luxembourg were used in the set-up phase. The capability to correctly simulate the occurrence expression of P. triticina infections on the upper leaf layers was then assessed over the 2003–2006 period. Our study revealed that the development of leaf rust required a period of at least 12 consecutive hours with air temperatures ranging between 8 and 16 °C, a relative humidity greater than 60 % (optimal values being 12–16 °C and up to 80 % for air temperatures and relative humidity, respectively) and rainfall less than 1 mm. Moreover, leaf rust occurrences and infections were satisfactorily simulated. The false alarm ratio was ranged from 0.06 to 0.20 in all the study sites. The probability of detection and critical success index for WLR infection were also close to 1 (perfect score).     

Acceptable Cancer Risks: Probabilities and Beyond

The acceptability of cancer risk requires consideration of factors that extend beyond mere numerical representations, such as either individual lifetime risk in excess of background and excess incidence. Recently, use of these numbers has been tempered by the addition of qualitative weights-of-evidence that describe the degree of support provided by animal and epidemiologic results. Nevertheless, many other factors, most of which are not quantitative, require incorporation but remain neglected by the analyst eager to use quantitative results.

In this paper we show that simple risk measures are often fraught with problems. Moreover, these measures do not incorporate the very essence of acceptability, which includes notions of responsibility, accountability, equity, and procedural legitimacy, among others. We link the process of risk assessment to those legal and regulatory standards that shape it. These standards are among the principal means to resolve risk-related disputes and to enhance the balancing of competing interests when science and law meet on uncertain and often conjectural ground.

We conclude the paper with a proposal for the portfolio approach to manage cancer risks and to deal with uncertain scientific information. This approach leads to the concept of "provisional acceptability," which reflects the choices available to the decisionmaker, and the trade-offs inherent to such choices.     

The Effects of Photochemical Oxidants on Materials

The excessive cracking of rubber products was one of the earliest indicators of the presence of atmospheric photochemical oxidants. It has been demonstrated that this excessive cracking of rubber is caused by atmospheric ozone formed in the photochemical smog formation process. Depending on the formulation of the rubber, cracking under stress can readily be detected within 3/4 hr when atmospheric oxidant levels are as low as 0.03 ppm. Natural and certain synthetic rubbers are particularly vulnerable. These rubbers when stressed show cracking when exposed to 0.02 ppm laboratory ozone for about 1 hr. Other materials known to deteriorate under atmospheric photochemical smog conditions are textiles and certain dyed fabrics, particularly under conditions of high humidity. Loss of tensile strength of cotton textiles when wet or moist, and similar fading of these dyed fabrics, particularly under high humidity, can be also produced by laboratory exposure of these textiles to pure ozone. Ozone effects on asphaltic materials ate also reported.     

Control of Fly Ash from Conventional Coal-Fired Utility Boilers

This paper presents a detailed review and critical evaluation of current technologies as applied to fine particulate emissions from coal-fired utility boilers. Quantitative assessments of the capabilities of both conventional and novel air pollution control devices to meet three different performance standards—the present New Source Performance Standard (NSPS) of 0.03 Ib particulate/MBtu heat input, and standards of 0.05 and 0.1 Ib particulate/MBtu are included. Each of the three conventional devices (electrostatic precipitator, fabric filter baghouse, and wet scrubber) is compared and rated with respect to eight different performance categories. This information can be used to determine the relative effectiveness and attractiveness of these three control devices. Novel devices are compared and rated in the same manner, the conclusions from which may provide the research administrator with a guide for the selection of those novel devices which offer the best potential for commercialization.

The major conclusions of the investigation are: (1) The use of conventional scrubbers for fine particulate control on coal-fired utility boilers may no longer be feasible at the new NSPS of 0.03 Ib/MBtu. (2) At the old NSPS (0.1 Ib/MBtu) conventional electrostatic precipitators and baghouses were often competitive. For the new stricter standard, however, the baghouse generally is the more attractive alternative. (3) Novel devices appear to offer almost no hope for this particular application (at a commercial level) between now and 1985 and only little hope before 1990.