H2O2、Na2FeO4去除土壤中总石油烃的反应动力学

利用H2O2、Na2FeO42种氧化剂对土壤中TPH进行去除实验,根据反应条件和反应速率的关系建立反应动力学模型,并对反应过程中反应速率变化、半衰期、TPH去除率等因素进行讨论和对比,寻找其反应规律.结果 表明:H2O2去除TPH过程符合一级反应动力学模型.Na2FeO4去除TPH过程符合二级反应动力学模型,H2O2浓度增大导致反应动力学常数增加,Na2FeO4浓度增大导致反应动力学常数减小.采用0.078,0.156,0.234 mol/L 3种浓度H202溶液与TPH的初始反应速率分别为0.61×10-3,1.38×10-3,2.09x 10-3 tool/(L·min),浓度为0.070,0.140,0.210 mol/L的Na2 FeO4溶液与TPH的初始反应速率分别为13.30× 10-3,20.47×10-3,12.86× 10-3 mol/(L· min).2种氧化剂与TPH的反应速率大小为:Na2 FeO4＞H2O2.H2O2、NaFeO4与TPH反应半衰期分别为40.40～66.50,4.10～7.14 min.H2O2的半衰期约为Na2FeO4的10倍.2种氧化剂对土壤中TPH去除率均可达到60％以上,但利用率较低.总结了2种氧化剂在去除TPH过程中反应速率、半衰期和去除率的特点,最终筛选并优化反应条件,为黄土高原土壤修复提供参考.     

中国钢铁行业CO2减排技术及成本研究

钢铁行业是我国主要的能源消费及CO₂排放行业,推动钢铁行业低碳绿色发展已成为实现我国碳达峰、碳中和的重要环节。为此,研究围绕能源结构调整、工艺结构优化、节能减排技术推广和CCUS技术应用4方面,通过设置基础情景、稳定发展情景和强化减排情景3类情景,利用边际减排成本曲线对我国钢铁行业34项减排技术的减排成本和减排潜力进行分析。结果表明:在稳定发展情景下,我国钢铁行业平均减排成本为433元/tCO₂,所有技术的总减排成本为2100亿元,总减排潜力为4.9亿t。在各项减排技术中,废铁-电弧炉炼钢具有较高的减排经济效益,其以较低的单位减排成本贡献了钢铁行业近50%的碳减排量。未来,我国应加快推进长流程炼钢向短流程炼钢的发展,推动钢铁行业生产工艺的结构性调整。     

An unusual high ozone event over the North and Northeast China during the record-breaking summer in 2018

Under the background of global warming, the summer temperature of the North and Northeast China (NNEC) has significantly increased since 2017, which was accompanied by the aggravated ozone (O₃) pollution. In 2018, the NNEC experienced a record-breaking summer of the past 40 years. Influenced by the abnormal high temperatures, a regional ozone event occurred on 2-3 August, over 63% of 79 selected cities in the NNEC were exposed to O₃ pollution, and the maximum value of MDA8 O₃ reached 268 μg/m³. Observations indicated that ozone concentrations agree well with the maximum temperature at 2 meters (MT2M) over NNEC with a correlation coefficient of 0.69. During the pollution episode, strong downdraft in the local high (35°N-42.5°N, 112.5°E-132.5°E; LH) over the NNEC created the favourable meteorological conditions for O₃ formation. By analyzing the horizontal wind and wave activity fluxes (WAFs) at 200 hPa, we found that the LH formation was resulted from the Rossby wave propagation from upstream along the mid-latitude Asian jet. The split polar vortex intrusion further strengthened the amplitude of the Rossby wave and reinforced the LH. Moreover, a secondary circulation between Typhoon Jongdari and the LH contributed to the enhanced LH with strong subsidence. On the other hand, the stratospheric intrusions under the deep subsidence also contributed to the enhanced surface O₃. In this study, the deep-seated meteorological dynamical mechanisms contributing to the abnormal high temperatures were investigated, which can lead to a better understanding of the regional O₃ pollution over NNEC under the global-warming background.     

Removal of antibiotic-resistant genes during drinking water treatment: A review

Once contaminate the drinking water source, antibiotic resistance genes (ARGs) will propagate in drinking water systems and pose a serious risk to human health. Therefore, the drinking water treatment processes (DWTPs) are critical to manage the risks posed by ARGs. This study summarizes the prevalence of ARGs in raw water sources and treated drinking water worldwide. In addition, the removal efficiency of ARGs and related mechanisms by different DWTPs are reviewed. Abiotic and biotic factors that affect ARGs elimination are also discussed. The data on presence of ARGs in drinking water help come to the conclusion that ARGs pollution is prevalent and deserves a high priority. Generally, DWTPs indeed achieve ARGs removal, but some biological treatment processes such as biological activated carbon filtration may promote antibiotic resistance due to the enrichment of ARGs in the biofilm. The finding that disinfection and membrane filtration are superior to other DWTPs adds weight to the advice that DWTPs should adopt multiple disinfection barriers, as well as keep sufficient chlorine residuals to inhibit re-growth of ARGs during subsequent distribution. Mechanistically, DWTPs obtain direct and inderect ARGs reduction through DNA damage and interception of host bacterias of ARGs. Thus, escaping of intracellular ARGs to extracellular environment, induced by DWTPs, should be advoided. This review provides the theoretical support for developping efficient reduction technologies of ARGs. Future study should focus on ARGs controlling in terms of transmissibility or persistence through DWTPs due to their biological related nature and ubiquitous presence of biofilm in the treatment unit.     

Co-metabolic and biochar-promoted biodegradation of mixed PAHs by highly efficient microbial consortium QY1

Polycyclic aromatic hydrocarbons (PAHs), typical representatives of the persistent organic pollutants (POPs), have become ubiquitous in the environment. In this study, a novel microbial consortium QY1 that performed outstanding PAHs-degrading capacity has been enriched. The degradation characteristics of single and mixed PAHs treated with QY1 were studied, and the effect of biochar on biodegradation of mixed PAHs and the potential of biochar in PAHs-heavy metal combined pollution bioremediation were also investigated. Results showed that, in single substrate system, QY1 degraded 94.5% of 500 mg/L phenanthrene (PHE) and 17.8% of 10 mg/L pyrene (PYR) after 7 days, while in PHE-PYR mixture system, the biodegradation efficiencies of PHE (500 mg/L) and PYR (10 mg/L) reached 94.0% and 96.2%, respectively, since PHE served as co-metabolic substrate to have significantly improved PYR biodegradation. Notably, with the cooperation of biochar, the biodegradations of PHE and PYR were greatly accelerated. Further, biochar could reduce the adverse impact of heavy metals (Cd²⁺, Cu²⁺, Cr₂O₇^2?) on PYR biodegradation remarkably. The sequencing analysis revealed that Methylobacterium, Burkholderia and Stenotrophomonas were the dominant genera of QY1 in almost all treatments, indicating that these genera might play key roles in PAHs biodegradation. Overall, this study provided new insights into the efficient bioremediation of PAHs-contaminated site.     

Potential applications of porous organic polymers as adsorbent for the adsorption of volatile organic compounds

Volatile organic compounds (VOCs) with high toxicity and carcinogenicity are emitted from kinds of industries, which endanger human health and the environment. Adsorption is a promising method for the treatment of VOCs due to its low cost and high efficiency. In recent years, activated carbons, zeolites, and mesoporous materials are widely used to remove VOCs because of their high specific surface area and abundant porosity. However, the hydrophilic nature and low desorption rate of those materials limit their commercial application. Furthermore, the adsorption capacities of VOCs still need to be improved. Porous organic polymers (POPs) with extremely high porosity, structural diversity, and hydrophobic have been considered as one of the most promising candidates for VOCs adsorption. This review generalized the superiority of POPs for VOCs adsorption compared to other porous materials and summarized the studies of VOCs adsorption on different types of POPs. Moreover, the mechanism of competitive adsorption between water and VOCs on the POPs was discussed. Finally, a concise outlook for utilizing POPs for VOCs adsorption was discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.     

滇池流域水污染防治规划与富营养化控制战略研究

根据滇池水污染防治的决策需求,在系统分析滇池水环境演变趋势和评估演变诱因的基础上,以流域水环境承载力方案及容量总量控制方案为基础,提出了滇池流域水污染防治中长期规划研究的方法体系,包括:问题驱动、调查诊断、规划基础、规划方案、评估调控、规划战略;提出了源头控制、工程控制和末端控制相结合的污染减排对策;通过构建3个尺度、8个分区及4个规划重点的流域污染减排集成体系及情景方案,来实现在2个规划期、3类水质目标、4种社会经济发展情景下的规划目标.在此基础上,提出了滇池富营养化控制的战略思路.     

Thermal defluorination behaviors of PFOS,PFOA and PFBS during regeneration of activated carbon by molten salt

• New method of mineralizing PFCs was proposed. • Activated carbon was regenerated while mineralizing PFCs. • Molten NaOH has good mineralization effect on PFOS and PFBS. Current study proposes a green regeneration method of activated carbon (AC) laden with Perfluorochemicals (PFCs) from the perspective of environmental safety and resource regeneration. The defluorination efficiencies of AC adsorbed perfluorooctanesulfonate (PFOS), perfluorooctanoic acid (PFOA) and perfluorobutanesulfonate (PFBS) using three molten sodium salts and one molten alkali were compared. Results showed that defluorination efficiencies of molten NaOH for the three PFCs were higher than the other three molten sodium salts at lower temperature. At 700°C, the defluorination efficiencies of PFOS and PFBS using molten NaOH reached to 84.2% and 79.2%, respectively, while the defluorination efficiency of PFOA was 35.3%. In addition, the temperature of molten salt, the holding time and the ratio of salt to carbon were directly proportional to the defluorination efficiency. The low defluorination efficiency of PFOA was due to the low thermal stability of PFOA, which made it difficult to be captured by molten salt.The weight loss range of PFOA was 75°C–125°C, which was much lower than PFOS and PFBS (400°C–500°C). From the perspective of gas production, fluorine-containing gases produced from molten NaOH-treated AC were significantly reduced, which means that environmental risks were significantly reduced. After molten NaOH treatment, the regenerated AC had higher adsorption capacity than that of pre-treated AC.     

Contents and sources of polycyclic aromatic hydrocarbons and organochlorine pesticides in vegetable soils of Guangzhou, China

We investigated contents, distribution and possible sources of PAHs and organochlorine pesticides (Ops) in 43 surface and subsurface soils around the urban Guangzhou where variable kinds of vegetables are grown. The results indicate that the contents of PAHs (16 US EPA priority PAHs) range from 42 to 3077 microg/kg and the pollution extent is classified as a moderate level in comparison with other investigations and soil quality standards. The ratios of methylphenanthrenes to phenanthrene(MP/P), anthracene to anthracene plus phenanthrene (An/178), benz[a]anthracene to benz[a]anthracene plus chrysene (BaA/228), indeno[1,2,3-cd]pyrene to indeno[1,2,3-cd]pyrene plus benzo[ghi]perylene (In/In+BP) suggest that the sources of PAHs in the soil samples are mixed with a dominant contribution from petroleum and combustion of fossil fuel. The correlation analysis shows that the PAHs contents are significantly related to total organic carbon contents (TOC) (R2=0.75) and black carbon contents (BC) (R2=0.62) in the soil samples. Dichlorodiphenyltrichloroethane and metabolites (DDTs) and hexachlorocyclohexanes and metabolites (HCHs) account largely for the contaminants of OPs. The concentrations of DDTs range from 3.58 to 831 microg/kg and the ratios for DDT/(DDD+DDE) are higher than 2 in some soil samples, suggesting that DDT contamination still exists and may be caused by its persistence in soils and/or impurity in the pesticide dicofol. The concentrations of HCHs are 0.19-42.3 microg/kg.     

Mutual effects of cadmium and phosphate on their adsorption and desorption by goethite

Adsorption of cadmium (Cd) and phosphate by oxides or soils has been extensively studied, but the adsorption/desorption kinetics and mutual effects of these two species in co-existing systems has received little attention. In this study, a batch equilibration method was used to investigate the effect of phosphate and its application time on Cd adsorption and desorption on goethite. The influence of Cd and its application time on phosphate sorption and desorption kinetics was also determined. For Cd adsorption, phosphate was introduced into the system by two sequences: pre-treating goethite at 40 (degrees)C for 1 week, and applying with Cd simultaneously. Similarly, for phosphate sorption, Cd was applied by pre-treating goethite at 40 (degrees)C for 1 week or simultaneous addition with phosphate. Results demonstrated that phosphate added to goethite enhanced Cd adsorption, and facilitated Cd release as compared to untreated goethite. Cadmium had slightly higher adsorption, but a significantly faster desorption rate from the goethite simultaneously treated with phosphate and Cd, as compared to phosphate-pretreated goethite. Cadmium and its application time had little impact on phosphate sorption by goethite. However, phosphate desorption kinetics was affected by Cd application time. When the sorption time was short (15 min), phosphate desorption was faster from the goethite that was simultaneously treated with phosphate and Cd, as compared to Cd pretreated or untreated goethite. In contrast, a longer sorption time (4 weeks) resulted in a higher desorption rate of phosphate from Cd pretreated goethite than simultaneously phosphate-Cd treated goethite. This study provided useful information on adsorption/desorption kinetics in complicated Cd-phosphate-goethite systems.