用好防灾科技学院教育平台 创建和弘扬防震减灾文化——恭贺母校升本暨校庆30周年

本文对防震减灾文化的组成、创建动力及其方法进行了探讨。初次提出了防震减灾文化的概念，并对创建防震减灾文化的目的和如何创建、弘扬防震减灾文化提出了看法和观点。     

Pearce型构造岩浆地球化学判别图评述——以玄武岩为例

自从六十年代板块构造的概念诞生以来,人们认识到有必要探讨古地理和古构造重建的方法.一段时期以来,很多学者(如Gilluly,1971)认为,岩浆作用与特定的大地构造环境紧密相关,不同的岩浆类型或火山岩系列产在一定的地壳环境,因而出现了许多运用主要或微量元素资料的分类体系或判别图.基于Irvine和Barager(1971)以及Miyashiro(1973)发表的主要元素图解能用来判别岩浆类型,而Pearce(1976)则介绍     

320米塔上测量的湍流统计特征量的初步分析

应用320米塔上第一次获得的垂直风速脉动量的垂直分布资料,根据湍流扩散统计理论并结合半经验近似,讨论由欧拉参数估算边界层下层扩散参数的主要方法,得到了湍流统计特征量K_(?)、σ_w及ε随高度和稳定度变化的经验关系,为北京地区大气扩散规律研究及污染模式的建立提供实验基础.     

高温嗜粪菌的选育和猪粪发酵研究

筛选得到了８株嗜高温（５５℃）嗜粪细菌，均具有较强的发酵猪粪能力。加入所选育菌株进行的猪粪高温（５５℃）固体好氧发酵实验发明，２４ｈ内可将猪粪发酵成无臭味、深褐色的稳定和无害化产物，常温下长时间放置也不会产生腐败和臭味。此发酵产物的氮试验法结果显示，猪粪已发酵至表观成熟和稳定化，可作为进一步制取优质有机复合肥料的良好前体物。     

中国东南沿海大(中)型浅成中低温热液矿床—斑岩型矿床评价的地质准则、成矿模式及其找矿意义

本文总结中国东南沿海高钾钙碱性—双峰式火山岩带中已勘查大中型矿床成矿环境的共性：矿床所处区域构造的部位、成岩与成矿时代、矿床与岩浆成因类型、火山构造及其基底构造控矿性、矿床与爆发角砾岩、矿床与矿化类型叠加与共生、矿化与蚀变的分带往、矿床定位深度与剥蚀深度。作者认为这八点可作为找寻与评价大（中）型矿床的地质准则。通过火山地质与矿床地质统一的研究提出本区晚中生代以火山为中心地热体系的成矿模式。并就三个方面作类比：①与现代火山地热体系成矿作用类比；②以紫金山高硫型浅成低温热液矿床与世界同类型矿床作比较；③与环太平洋其他火山岩带同类型矿床模式作类比．通过建立本区的模式与类比获得进一步找矿中值得重视的一些思路．     

LPWCO method for the treatment of high concentrated organic wastewater

Based on wet air oxidation (WAO) and Fenton reagent, thispaper raises a new low pressure wet catalytic oxidation(LPWCO)which requires low pressure for the treatment of highlyconcentrated and refractory organic wastewater. Compared withgeneral wet air oxidation, the pressure of the treatment(0.1-0.6MPa) is only one of tens to percentage of latter(3.5-10MPa). Inaddition, its temperature is no more than 180℃.Compared withFenton reagent, while H2O2/COD(weight ratio) less than 1.2, theremoval of COD in the treatment is over twenty percents more thanFenton's even the value of COD is more than 14000mg/L. In thispaper, we study the effect factor of COD removal and the mechanismof this treatment. The existence of synergistic effect (catalytic oxidation and carbonization) for COD removal in H2SO4-Fenton reagent system under the condition of applied pressure and heating (0.1-0.6MPa, 104-165℃) was verified. The best condition of this disposal are as follows:H2O2/COD(weight ratio)=0.2-1.0, Fe2+ 0.6×10-3 mol, H2SO4 0.5mol, COD>1×104mg/L, the operating pressure is 0.1-0.6MPa and temperature is 104-165℃. This method suit to dispose the high-concentrated refractory wastewater, especially to the wastewater containing H2SO produced in the manufacture of pesticide, dyestuff and petrochemical works.     

区域环评中废水排放量的预测方法研究

阐述了区域环评污染物排放源强的预测原则,对区域开发活动中废水量和COD排放量的预测方法作了详细论述,并以温州滨海新区环评为例作了实证研究.     

德兴地区超大型铜、金矿床成矿控制因素及其模拟实验

在深入研究德兴地区超大型铜、金矿成矿地质背景的基础上 ,从构造地球化学方面着重研究德兴地区超大型铜、金矿床成矿的控制因素 ,并进行构造控矿模拟实验。研究结果表明 ,德兴地区超大型铜、金矿床的形成除因其处于特殊的构造位置 ,具有特殊的地质背景及成矿环境外 ,还与多种地质作用、多种控矿因素耦合作用及地质构造长期发展演化使成矿物质多次叠加富集密切相关     

黄磷尾气中单质磷的测定

研究了测定黄磷尾气中单质磷的分析方法 ,该方法具有灵敏度高 ,线性好 ,操作快速、简便的特点 ,检测限 1μg 5mL ,摩尔吸光系数为 4 5× 10 4L mol·cm ,线性相关系数为 0 9998     

A metal-OH group modification strategy to prepare highly-hydrophobic MIL-53-Al for efficient acetone capture under humid conditions

A series of highly-hydrophobic MIL-53-Al (MIL = Materials of Institut Lavoisier) frameworks synthesized via decoration of the Al-OH groups by alkyl phosphonic acid were developed as adsorbents for removing acetone from humid gas streams. The newly prepared materials were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), N₂ adsorption-desorption and thermogravimetric analysis (TGA). Their adsorption behaviors toward acetone vapor under dry and wet conditions were studied subsequently. Results showed that alkyl phosphonic acid was successfully grafted into MIL-53-Al skeleton through coordinating interaction with Al³⁺ generating [email protected]_x (x = 12, 14, 18). The [email protected]_x exhibited similar crystal structure and thermal stability to parent MIL-53-Al. Furthermore, the modified materials showed significantly enhanced hydrophobicity. The water vapor uptake of [email protected]₁₄ decreased by 72.55% at 75% relative humidity (RH). Dynamic adsorption experiments demonstrated that water vapor had almost no effect on the acetone adsorption performance of [email protected]₁₄. Under the condition of 90% RH, the acetone adsorption capacity of [email protected]₁₄ was 102.98% higher than that of MIL-53-Al. Notably, [email protected]₁₄ presented excellent adsorption reversibility and regeneration performance in 10 adsorption-desorption cycles. Taken together, the strategy of metal-OH group modification is an attractive way to improve the acetone adsorption performance over metal-organic frameworks (MOFs) under humid conditions. Besides, [email protected]₁₄ would be deemed as a promising candidate for capturing acetone in high moisture environment.