Alkylphenol polyethoxylate removal in a pilot-scale reed bed and phenotypic characterization of the aerobic heterotrophic community.

The removal of the non-ionic surfactant Triton X-100, dosed at 30 and 300 mg/L in a pilot-scale subsurface horizontal flow reed bed, and the aerobic heterotrophic cultivable community associated with the roots and with the substrate gravel in both absence and presence of Triton X-100 were investigated. t-Octylphenol (OP) and its mono-, di- and tri-ethoxyl derivatives, among others, were found in the outlet. A mass balance allowed us to calculate that approximately 40% of the Triton X-100 metabolites OP and octylphenol polyethoxylate derivatives flowed out of the reed bed during the dosage and postdosage experiments. More aerobic heterotrophic microorganisms adhered to the roots than to the gravel. The appearance of new strains (Aeromonas, Flavobacterium, and Aquaspirillum) and the increased presence of others (Pseudomonas) during the dosage of Triton may be linked to the capacity of these bacteria to adapt to the presence of the surfactant or to use it as a nourishment.     

Aluminium flows in vehicles: enhancing the recovery at end-of-life

The transportation sector constitutes the major end-use market for aluminium-containing products and expectations for the future do indicate that aluminium will increase at 140 kg per vehicle. Moreover, up to 75 % aluminium recycled in Europe is used in transportation: thus, metal scrap recovered from ELVs is a key lever to act for closing material cycles. However, although the management chain of ELVs has an established procedure and aluminium scrap is usually recovered in shredding plants, a considerable fraction of the metal particles ends up in the light fraction called car fluff and is then landfilled. In this study we investigated potential of enhancing the recovery of aluminium scrap from the light fluff treatment. With this goal, the quantity of aluminium embedded in the Italian transport sector in the last 62 years was estimated, and a campaign of characterization in size and shape distribution of aluminium particles in the light fluff output has been carried out. The results estimated up to about 560,000 tons of metal are potentially recoverable from the treatment of light fluff at current operating conditions, but relevant improvements may be achieve when size and shape distribution criteria are adopt to implement eddy currents separation for a quantitative metal recovery.     

Amazonian Tree Mortality during the 1997 El Niño Drought

Abstract: In 1997, the Amazon Basin experienced an exceptionally severe El Niño drought. We assessed effects of this rare event on mortality rates of trees in intact rain forest based on data from permanent plots. Long-term (5- to 13-year) mortality rates averaged only 1.12% per year prior to the drought. During the drought year, annual mortality jumped to 1.91% but abruptly fell back to 1.23% in the year following El Niño. Trees dying during the drought did not differ significantly in size or species composition from those that died previously, and there was no detectable effect of soil texture on mortality rates. These results suggest that intact Amazonian rainforests are relatively resistant to severe El Niño events.     

Photoreactivity of humic substances: relationship between fluorescence and singlet oxygen production

Humic substances are natural compounds abundantly present in the environment. They play a significant role in the natural attenuation of pollution in surface water due to their capacity to generate reactive species upon solar light excitation. Finding physico chemical parameters related to this property would be of a great help in the prediction studies of the organic pollutants fate. In this work, we investigated relationships between the ability of the humic substances to produce singlet oxygen and their fluorescence properties. For this, a series of sixteen humic acids, fulvic acids, and water-extractable organic matter from soils were studied. The steady-state singlet oxygen concentrations in the irradiated humic substances solutions were measured by monitoring the loss of furfuryl alcohol added as a singlet oxygen scavenger. The emission spectra of the sixteen samples were also recorded. Values of the steady-state singlet oxygen concentrations and the emission intensities showed significant variations among the humic samples and a parallel increase. Thus, here we demonstrate that the rate of singlet oxygen production and the emission intensity of the humic samples are correlated, the best correlation being obtained for emission wavelengths between 500 and 580 nm. This correlation which was never reported until now can be used to estimate the singlet oxygen-production capacity of the humic substances based on their fluorescent properties.     

Effect of impeller type and agitation on the performance of pilot scale ASBR and AnSBBR applied to sanitary wastewater treatment

The objective of this work was to assess the effect of agitation rate and impeller type in two mechanically stirred sequencing batch reactors: one containing granulated biomass (denominated ASBR) and the other immobilized biomass on polyurethane foam (denominated AnSBBR). Each configuration, with total volume of 1 m³, treated 0.65 m³ sanitary wastewater at ambient temperature in 8-h cycles. Three impeller types were assessed for each reactor configuration: flat-blade turbine impeller, 45°-inclined-blade turbine impeller and helix impeller, as well as two agitation rates: 40 and 80 rpm, resulting in a combination of six experimental conditions. In addition, the ASBR was also operated at 20 rpm with a flat-blade turbine impeller and the AnSBBR was operated with a draft tube and helix impeller at 80 and 120 rpm. To quantify how impeller type and agitation rate relate to substrate consumption rate, results obtained during monitoring at the end of the cycle, as well as the time profiles during a cycle were analyzed. Increasing agitation rate from 40 rpm to 80 rpm in the AnSBBR improved substrate consumption rate whereas in the ASBR this increase destabilized the system, likely due to granule rupture caused by the higher agitation. The AnSBBR showed highest solids and substrate removal, highest kinetic constant and highest alkalinity production when using a helix impeller, 80 rpm, and no draft tube. The best condition for the ASBR was achieved with a flat-blade turbine impeller at 20 rpm. The presence of the draft tube in the AnSBBR did not show significant improvement in reactor efficiency. Furthermore, power consumption studies in these pilot scale reactors showed that power transfer required to improve mass transfer might be technically and economically feasible.     

Chemical characterisation of spent rechargeable batteries

A chemical characterisation of used batteries can give useful information to implement suitable recycling techniques and to estimate the flux of the different materials recovered. This work is aimed to provide quantitative data about the composition of mixed batteries (in particular, Ni–Cd, Ni-MH and Li-ion batteries) collected in a Northern Italian town in order to evaluate the feasibility of recovery processes applied to the selected material. The higher concentration of metals in the <3 mm fraction suggested that significant quantities of valuable elements could be recovered: in particular, for a kg of the <3 mm fraction deriving from disassembled batteries, about 390 g Ni and 330 g Cd can be recovered from Ni–Cd, 630 g Ni, 80 g Co from Ni-MH and 250 g Co, 110 g Ni, 120 g Cu from Li-ion ones. Leaching tests applied to the same fractions, to assess possible contaminant releases, resulted in low metal content in aqueous solutions (except for Al and Fe, the concentrations of all metals remained below 1 mg/kg). Even so, great care is required in all handling activities due to the high pH values of leachate solutions.