红壤性水稻土铅环境容量研究

以湖南省桃林铅锌矿区为试验区,通过水稻盆栽、田间小区、大田、农田地表径流和淋溶等试验以及土壤酶和微生物试验,研究土壤铅对土壤-作物(水稻)、土壤-微生物和酶、土壤-水体三体系的各种效应,得到各单体系中铅的临界含量并确定了红壤性水稻土中铅的临界含量,通过铅的平衡试验,建立了土壤铅环境容量数学模型,得出红壤性水稻土的铅环境容量。     

不完全厌氧—好氧投菌法处理丝绸染整及砂洗废水

阐述了用不完全厌氧——好氧工艺和投入优势菌的方法处理丝绸染整及砂洗废水的原理,工艺流程,工艺参数、经济效益及结果分析。从实验室及生产试验数据看,此法可使废水的COD由2000—3000mg/l降低至100mg/l以下,平均去除率达96％。出水BOD小于30mg/l,平均去除率为95％。     

基于RS和GIS的西部干旱区生态环境调控研究

实现生态环境优化调控与科学管理，是保护生态环境、促进社会经济与环境协调发展、建立人与自然和谐关系的重要举措。尤其是对生态环境十分脆弱的西部干旱地区，各级政府和学术界给予高度的重视。在定量研究生态环境调控的理论方法和具体操作过程中，需要借助遥感(RS)、地理信息系统(GIS)以及它们的结合等技术手段，来实现时空变化信息的实时、动态监测以及信息的提取、分析和处理。本文针对西部干旱区生态环境调控问题。提出一种RS和GIS支持下的生态环境调控量化研究方法，包括基于RS和GIS的西部干旱区生态环境量化指标体系、生态环境调控管理模型、调控方案优选与实施。并介绍一个应用例子。     

南方天然水体DOM的化学分级、变化特征及三卤甲烷生成势(THMFP)特性研究

采用XAD树脂吸附法,在春季内(3～5月)连续对南方深圳水库中的水体溶解性有机物(DOM)进行化学分级表征.结果表明,天然水体DOM的总量和单个化学分级组分含量在一个季节会发生一定的波动,但总的分布特征在季节内未发生根本变化,即憎水酸(HoA)和亲水部分(HiM)浓度始终较高,而憎水碱(HoB)、憎水中性物(HoN)、弱憎水酸(WHoA)浓度则相对较低.同时,选取代表性时间点对DOM各化学分级组分进行了消毒副产物三卤甲烷生成势(THMFP)的研究,发现三卤甲烷(THMs)的主要前驱物为憎水和弱憎水有机部分,对THMFP的贡献共占约80%.进一步研究发现,憎水中性物、憎水酸、弱憎水酸的THMs生成能力较强,总体上与紫外吸收能力基本一致;但弱憎水酸表现略有不同,其SUVA(100×UV254/DOC)值并不十分突出,但三卤甲烷生成能力却明显较高,说明DOM的紫外吸收特性不能完全作为THMFP特性的替代指标.亲水物质(HiM)的SUVA值也不高,但其THMs生成能力接近憎水酸部分,值得水处理工艺研究重点关注.     

汕头港湾附近水域潮流特征和污染物扩散的数值计算 Ⅱ.汕头港湾附近水域污染物的扩散数值模拟

本文在对汕头港湾附近水域的潮流特征进行数值模拟并获得了潮流和余流场分布信息的基础上，通过特定排放源的数值模拟，研究了该水域污染扩散条件及输运规律。     

钢铁厂废水中有机污染物组成分析

采用GDX-502树脂富集等前处理方法。毛细管气相色谱和色—质联用等检测手段,分析钢铁厂废水有机污染物组成。定性出以芳烃类、酚类为主的73种有机污染物。采用多污染物环境影响评价系统,就其有机污染物对人体健康和生态的潜在危害进行了初步评价。结果表明,甲酚、萘、苯、酚是危害人体健康和生态的主要污染物。     

Seasonal variation and sources of derivatized phenols in atmospheric fine particulate matter in North China Plain

Qualitative and quantitative analyses of derivatized phenols in Beijing and in Xinglong were performed from 2016 to 2017 using gas chromatography-mass spectrometry.The results showed substantially more severe pollution in Beijing.Of the 14 compounds detected,the total average concentration was 100 ng/m~3 in Beijing,compared with 11.6 ng/m~3 in Xinglong.More specifically,concentration of nitro-aromatic compounds(NACs)(81.9 ng/m~3 in Beijing and 8.49 ng/m3 in Xinglong) was the highest,followed by aromatic acids(14.6 ng/m~3 in Beijing and 2.42 ng/m~3 in Xinglong) and aromatic aldehydes(3.62 ng/m~3 in Beijing and 0.681 ng/m~3 in Xinglong).In terms of seasonal variation,the highest concentrations were found for 4-nitrocatechol in winter in Beijing(79.1±63.9 ng/m~3) and 4-nitrophenol in winter in Xinglong(9.72±8.94 ng/m~3).The analysis also revealed diurnal variations across different seasons.Most compounds presented higher concentrations at night in winter because of the decreased boundary layer height and increased heating intensity.While some presented higher levels during the day,which attributed to the photo-oxidation process for summer and more biomass burning activities for autumn.Higher concentrations appeared in winter and autumn than in spring and summer,which resulted from more coal combustions and adverse meteorological conditions.The significant correlations among NACs indicated similar sources of pollution.Higher correlations presented within each subgroup than those between the subgroups.Good correlations between levoglucosan and nitrophenols,nitrocatechols,nitro salicylic acids,with correlation coefficients(r) of 0.66,0.69 and 0.69,respectively,indicating an important role of biomass burning among primary sources.     

Effect of sulfur source on photocatalytic degradation performance of CdS/MoS2 prepared with one-step hydrothermal synthesis

Cd S/Mo S_2,an extremely efficient photocatalyst,has been extensively used in hydrogen photoproduction and pollutant degradation.Cd S/Mo S_2can be synthesized by a facile one-step hydrothermal process.However,the effect of the sulfur source on the synthesis of Cd S/Mo S_2via one-step hydrothermal methods has seldom been investigated.We report herein a series of one-step hydrothermal preparations of Cd S/Mo S_2using three different sulfur sources:thioacetamide,L-cysteine,and thiourea.The results revealed that the sulfur source strongly affected the crystallization,morphology,elemental composition and ultraviolet(UV)–visible-light-absorption ability of the Cd S/Mo S_2.Among the investigated sulfur sources,thioacetamide provided the highest visible-light absorption ability for Cd S/Mo S_2,with the smallest average particle size and largest surface area,resulting in the highest efficiency in Methylene Blue(MB)degradation.The photocatalytic activity of Cd S/Mo S_2synthesized from the three sulfur sources can be arranged in the following order:thioacetamideL-cysteinethiourea.The reaction rate constants(k)for thioacetamide,L-cysteine,and thiourea were estimated to be 0.0197,0.0140,and 0.0084 min~(-1),respectively.However,thioacetamide may be limited in practical application in terms of its price and toxicity,while L-cysteine is relatively economical,less toxic and exhibited good photocatalytic degradation performance toward MB.     

Study on the effects of organic matter characteristics on the residual aluminum and flocs in coagulation processes

Characteristics of organic matter may affect the residual aluminum after the coagulation process. This study reported the results of a survey for one drinking water treatment plant and measured the concentration of residual aluminum species with different molecular weights.Survey results indicated that humic acid or organic matter whose molecular weight was smaller than 1500 Da had significant effects on residual aluminum. All the treatment processes were ineffective in removing dissolved organic matter whose molecular weight was smaller than1500 Da. These results also indicated that the addition of sand or polyacrylamide in the coagulation process could greatly decrease the concentration of humic acid, and the concentration of residual aluminum also decreased. These results revealed that for all water samples after filtration, the majority of total residual aluminum existed in the form of total dissolved aluminum, accounting for 70%–90%. The concentration of residual aluminum produced in bovine serum albumin solutions indicated that when the DOC was larger than4.0 mg/L, there were still significant differences when the solution p H value varied from 4.0 to 9.0.     

Degradation of sulfonamides and formation of trihalomethanes by chlorination after pre-oxidation with Fe(Ⅵ)

Sulfonamides are used in human therapy,animal husbandry and agriculture but are not easily biodegradable,and are often detected in surface water.Sulfamethazine(SMZ) and sulfadiazine(SDZ) are two widely used sulfonamide antibiotics that are used heavily in agriculture.In this study,they were degraded in an aqueous system by chlorination after pre-oxidation with ferrate(VI)(FeVIO42-,Fe(VI)),an environmentally friendly oxidation technique that has been shown to be effective in degrading various organics.The kinetics of the degradation were determined as a function of Fe(VI)(0–1.5 mg/L),free chlorine(0–1.8 mg/L) and temperature(15–35°C).According to the experimental results,SMZ chlorination followed second-order kinetics with increasing Fe(VI) dosage,and the effect of the initial free chlorine concentration on the reaction kinetics with pre-oxidation by Fe(VI) fitted a pseudo-first order model.The rate constants of SDZ and SMZ chlorination at different temperatures were related to the Arrhenius equation.Fe(VI) could reduce the levels of THMs formed and the toxicity of the sulfonamide degradation systems with Fe(VI) doses of 0.5–1.5 mg/L,which provides a reference for ensuring water quality in drinking water systems.