Thermodynamics of metal cation binding by a solid soil derived humic acid. 2. Binding of Mn(II), Co(NH3)6aq3+ and Hg(II)

Metal binding is an important function of humic acids (HAs) in soils, sediments and waters. At pH 2.0, Mn(II) and Co(NH3)6aq3+ bind tightly in one step labeled A to a solid humic acid NHA isolated from a New Hampshire soil. Two consecutive steps are observed for Hg(II) binding. All the binding isotherms fit the Langmuir model in the temperature range 10.0-50.0 degrees C. Stoichiometric site capacities indicate predominant binding by charge-neutralizing HA carboxylate groups for Mn(II) and the second step A of Hg(II) binding. The binding affinity order in step A is Co(NH3)(6)3+>Hg(II)>Mn(II). Metal binding enthalpy and entropy changes fit the linear correlation found previously for binding of other metal cations by solid HAs. Free energy buffering from cooperative enthalpy and entropy changes and lower enthalpies for metal-HA interactions in solution suggest that desolvation of the cations and HA binding sites as well as HA conformational changes to allow for inner-sphere complexation predominate metal binding by hydrated solid HAs.     

Pesticides and metabolites in cassava, eucalyptus, plum and cashew leaves and roots in relation to a point source in Kibaha, Tanzania

Leaves of Eucalyptus sp., Prunus domestica (plum), and Anacardium occidentale (cashew), as well as roots and leaves of Manihot esculenta (cassava) were used to study the local distribution of pesticides and metabolites from a point source, an old storage site at Vikuge farm in Tanzania. The GPC-cleaned extracts were analyzed by GC-ECD and GC/MS. Eleven organochlorine pesticide residues namely pentachloroanisole, p,p'-DDT, o,p'-DDT, p,p'-DDE, o,p'-DDE, p,p'-DDD, o,p'-DDD, alpha-HCH, beta-HCH, delta-HCH and epsilon-HCH were detected in the samples. The concentrations of total DDT were 818 ng/g fw in Eucalyptus sp., 16 ng/g fw in A. occidentale and 4 ng/g fw in P. domestica. In M. esculenta, total DDT ranged from 191 to 586 ng/g fw in roots and 7 to 425 ng/g fw in leaves. The concentrations of total HCH were up to 15 ng/g fw in Eucalyptus sp., while the concentrations of pentachloroanisole were up to 2 ng/g fw in leaves of M. esculenta. There are very strong positive correlations in the concentrations of the detected compounds, suggesting that they have a common source. The low DDE/DDT ratios (0.02-0.07) in all samples indicate input of non-degraded DDT from the source. The high alpha-HCH/gamma-HCH ratios in some samples (>3.1-10) indicate input of technical HCH. The concentrations of total DDT in cassava roots were either very close to, or greater than, the FAO/WHO limit, indicating risks and concern to public health.     

Prediction of ozone concentrations in Oporto city with statistical approaches

The performance of three statistical methods: time-series, multiple linear regression and feedforward artificial neural networks models were compared to predict the daily mean ozone concentrations. The study here reported was based on data from one urban site with traffic influences and one rural background site. The studies were performed for the year 2002 and the respective four trimesters separately. In the multiple linear regression and feedforward artificial neural network models, the concentrations of ozone, the concentrations of its precursors (nitrogen oxides) and some meteorological variables for one and two days before the prediction day were used as predictors. For the application of these models in the validation step, the inputs of ozone concentration for one and two days before were replaced by the ozone concentrations predicted by the models. The results showed that time-series modelling was not profitable. In the development step, similar performances were obtained with multiple linear regression and feedforward artificial neural network. Better performance indexes were achieved with feedforward artificial neural network models in validation step. Concluding, feedforward artificial neural network models were more efficient to predict ozone concentrations.     

Removal of PCB-DNAPL from a rough-walled fracture using alcohol/polymer flooding

Phase behaviour experiments employing PCB (Aroclor 1242)/alcohol/water systems were conducted with ethanol (EtOH) and n-propanol (nPA). Both exhibited an affinity for the aqueous phase within the entire two-phase region. As much as 88% by volume (88% vol.) EtOH and 80% vol. nPA were necessary to achieve full miscibility of the PCB in the aqueous phase. DNAPL-water interfacial tension (IFT) was reduced from 38.9 dyn/cm to 4.7 dyn/cm and 2.4 dyn/cm with 80% vol. EtOH and 76% vol. nPA. The addition of alcohol brought about 41% and 54% reductions in DNAPL viscosity at maximal concentrations of EtOH and nPA. Density of the PCB-DNAPL was relatively unaffected by the presence of alcohol. A series of seven experiments were conducted where successive slugs of nPA and xanthan gum polymer solutions were injected into a fractured shale sample. A 30% vol. nPA solution injected under a hydraulic gradient of 0.36 allowed enhanced PCB removal primarily through reduction of IFT and resulted in 72% DNAPL recovery. Several pore volumes of alcohol solution were necessary to displace all the potentially mobile non-wetting phase since the high-viscosity DNAPL was mobilized at a lower flow rate than the overall fluid velocity, illustrating non-piston displacement. The injection of a 95% vol. nPA alcohol solution, theoretically at a sufficient concentration to produce fully miscible displacement of the residual DNAPL at equilibrium, resulted in non-equilibrium partitioning of the PCB into the flushing solution, likely due to the high fluid velocities in the fracture. The injection of 200 pore volumes of 95% vol. nPA solution resulted in 94% DNAPL recovery. Alcohol floods operated below the miscibility envelope appear to be a valuable source zone remedial alternative where the objective is to reduce DNAPL mobility to zero, but it should be noted that DNAPL mobility is increased during the application of the technology and steps may need to be taken to prevent unwanted vertical mobilization.     

Controls on atrazine leaching through a soil-unsaturated fractured limestone sequence at Brévilles, France

The objective of this study was to identify the main controls on atrazine leaching through luvisols and calcisols overlying fissured limestone using the dual-permeability model MACRO. The model parameterisation was based on a combination of direct measurements (e.g. hydraulic properties, adsorption and degradation), literature data and calibration against bromide leaching experiments in field plots. A Monte Carlo sensitivity analysis was carried out for a typical application pattern, considering two different depths of unsaturated limestone (15 and 30 m). MACRO calibrations to the field experiments demonstrated the occurrence of strong macropore flow in the luvisol, while transport in the calcisol could be described by the advection-dispersion equation. MACRO simulations of tritium and atrazine leaching qualitatively matched tritium concentration profiles measured in the limestone and atrazine concentrations measured in piezometers and in aquifer discharge via a spring. The sensitivity analysis suggested that the thickness of the limestone, as well as the transport properties and processes occurring in the unsaturated rock (e.g. matrix vs. fissure flow) will have little significant long-term effect on atrazine leaching, mainly because degradation is very slow in the limestone. No mineralization of atrazine was detected in one-year incubations and a mean half-life of 10 years was assumed in the simulations. Instead, processes occurring in the soil exerted the main control on predicted atrazine leaching, especially variations in the degradation rate and the strength of sorption and macropore flow. However, fissure flow in unsaturated rock is expected to exert a much more significant control on groundwater contamination for compounds that degrade more readily in the deep vadose zone.     

Remediation of contaminated agricultural soils near a former Pb/Zn smelter in Austria: batch, pot and field experiments

Metal contaminated crops from contaminated soils are possible hazards for the food chain. The aim of this study was to find practical and cost-effective measures to reduce metal uptake in crops grown on metal contaminated soils near a former metal smelter in Austria. Metal-inefficient cultivars of crop plants commonly grown in the area were investigated in combination with in-situ soil amendments. A laboratory batch experiment using 15 potential amendments was used to select 5 amendments to treat contaminated soil in a pot study using two Barley (Hordeum vulgare L.) cultivars that differed in their ability to accumulate cadmium. Results from this experiment identified 3 of these amendments for use in a field trial. In the pot experiment a reduction in ammonium nitrate extractable Cd (<41%) and Pb (<49%) compared to the controls was measured, with a concurrent reduction of uptake into barley grain (Cd<62%, Pb<68%). In the field extractable fractions of Cd, Pb, and Zn were reduced by up to 96%, 99%, and 99%, respectively in amended soils.     

In situ and laboratory bioassays using Poecilia reticulata Peters, 1859 in the biomonitoring of an acidic lake at Camaçari, BA, Brazil

The suitability and viability of acute in situ bioassays were investigated in the biomonitoring program of an acidic lake contaminated with sulphur residues. Responses of organisms observed in laboratory and in situ bioassays were also assessed to determine whether or not they were similar and comparable, regarding accuracy and precision. Newborn Poecilia reticulata were employed as test organisms and exposed to the same water samples under in situ and laboratory conditions. Mortality/immobility was the endpoint assessed and dead/immobile organisms were counted at various time intervals during exposure. The mean calculated LT50 values and 95% confidence intervals were 1.61 (1.36-1.87) h in the laboratory bioassays and 0.72 (0.55-0.89) h in the in situ bioassays. Statistical comparison of these values revealed a significant difference (p<0.05). In situ bioassays were more accurate than those carried out in the laboratory, demonstrating higher sensitivity and better reproduction of what occurs in nature, while laboratory bioassays were more precise.     

Phytostabilization of a metal contaminated sandy soil. I: Influence of compost and/or inorganic metal immobilizing soil amendments on phytotoxicity and plant availability of metals

In a lysimeter set-up, compost addition to an industrial contaminated soil slightly reduced phytotoxicity to bean seedlings. The "Phytotoxicity Index" (on a scale from 1 to 4) decreased from 3.5 to 2.8. The same treatment also reduced metal accumulation in grasses: mean Zn, Cd and Pb concentrations decreased respectively from 623 to 135, from 6.2 to 1.3 and from 10.7 to <6 mg kg-1 dry weight. When combined with inorganic metal immobilizing amendments, compost had a beneficial effect on plant responses additional to the inorganic amendments alone. Best results were obtained when using compost (C)+cyclonic ashes (CA)+steel shots (SS). The "Phytotoxicity Index" decreased to 1.7, highest diversity of spontaneously colonizing plants occurred, and metal accumulation in grasses reduced to values for uncontaminated soils. Based on the first year evaluation, C+CA+SS showed to be an efficient treatment for amendment assisted phytostabilization of the contaminated Overpelt soil.     

Genotypic variations in the accumulation of Cd, Cu, Pb and Zn exhibited by six commonly grown vegetables

Metal contaminants in garden and allotment soils could possibly affect human health through a variety of pathways. This study focused on the potential pathway of consumption of vegetables grown on contaminated soil. Five cultivars each of six common vegetables were grown in a control and in a soil spiked with Cd, Cu, Pb and Zn. Highly significant differences in metal content were evident between cultivars of a number of vegetables for several of the contaminants. Carrot and pea cultivars exhibited significant differences in accumulated concentrations of Cd and Cu with carrot cultivars also exhibiting significant differences in Zn. Distinctive differences were also identified when comparing one vegetable to another, legumes (Leguminosae) tending to be low accumulators, root vegetables (Umbelliferae and Liliaceae) tending to be moderate accumulators and leafy vegetables (Compositae and Chenopodiaceae) being high accumulators.     

Changes in amino acid profile and metal content in seeds of Cicer arietinum L. (chickpea) grown under various fly-ash amendments

Seeds of Cicer arietinum L. plants are edible and a valuable source of protein. Accumulation of toxic metals in the edible part of the plant, grown in fields close to fly-ash (FA) landfills, may pose a threat to human health. In the present study, the effects of FA and its amendments with different ameliorants viz., garden soil (GS), press mud (PM) and saw dust (SD), on total soluble protein contents, amino acid composition and metal accumulation in seeds were investigated in var. CSG-8962 and var. C-235 of C. arietinum. Plants accumulated adequate amounts of essential metals viz. Fe, Cu, Zn in seeds, while the toxic metals such as Cd and Cr were taken up in smaller quantities. The accumulation of Cr and Cd was less in var. C-235 than var. CSG-8962. Amendment of FA with PM enhanced the amount of soluble protein and amino acids in both varieties and was found to be superior among all tested ameliorants. Both quantitative and qualitative analysis of amino acids showed better response in var. C-235 as compared to var. CSG-8962. Thus var. C-235 seems to be suitable for cultivation in FA contaminated areas due to more accumulation of essential metals and less accumulation of toxic metals in seeds. Application of PM may further improve the growth of plants and nutritional quality of seeds.