Lateral migration and offsite surface emission of landfill gas at City of Montreal Landfill Site

An evaluation of lateral landfill gas migration was carried out at the Saint-Michel Environmental Complex in Montreal, City of Montreal Landfill Site, Canada, between 2003 and 2005. Biogas concentration measurements and gas-pumping tests were conducted in multilevel wells installed in the backfilled overburden beside the landfill site. A migration event recorded in autumn 2004 during the maintenance shutdown of the extraction system was simulated using TOUGH-LGM software. Eleven high-density instantaneous surface monitoring (ISM) surveys of methane were conducted on the test site. Gas fluxes were calculated by geostatistical analyses of ISM data correlated to dynamic flux chamber measurements. Variograms using normal transformed data showed good structure, and kriged estimates were much better than inverse distance weighting, due to highly skewed data. Measurement-based estimates of yearly off-site surface emissions were two orders of magnitude higher than modelled advective lateral methane flux. Nucleodensimeter measurements of the porosity were abnormally high, indicating that the backfill was poorly compacted. Kriged porosity maps correlated well with emission maps and areas with vegetation damage. Pumping tests analysis revealed that vertical permeability was higher than radial permeability. All results suggest that most of the lateral migration and consequent emissions to the atmosphere were due to the existence of preferential flow paths through macropores. In December 2006, two passively vented trenches were constructed on the test site. They were successful in countering lateral migration.     

RESEARCH: Shrub Propagation Techniques for Biological Control of Invading Tree Species

Cornus stolonifera, Salix petiolaris, and Spiraea alba clones already located within the corridor of an electrical power line. To establish the efficiency of treatments, we examined the statistical differences of growth traits between species and treatments. An analysis of the effects of layering shows, after the first growth season, differences for all growth traits in only one species, Spiraea alba. After the second growth season, we observed the development of new aerial stems. Layering favors horizontal expansion of shrubs over height development. The third year after treatment, the effect of layering is reduced except for Cornus stolonifera, which continuously increases, as shown by the significant progression of the clone issued from the layer even five years after treatments. With the cutting back technique, we expected a distinct vertical growth of the shrubs at the expense of increasing the crown diameter. This technique would be best associated with the rejuvenation of clones, followed by a layering of new shoots to allow a horizontal expansion of the shrubs. Therefore, the formation of a dense shrub community by layering should be considered a valuable approach for the biological control of undesirable trees in powerline rights-of-way.     

Biodegradation of crosslinked acrylic polymers by a white-rot fungus

Two synthetic superabsorbent crosslinked acrylic polymers were mineralized by the white-rot fungusPhanerochaete chrysosporium. The amount of polymer converted to CO₂ increased as the amount of polymer added to the cultures increased. In the presence of sufficiently large amounts of the superabsorbents, such that all of the culture fluid was absorbed and a gelatinous matrix was formed, the fungus still grew and mineralization was observed. Neither the polymers, nor their degradation products were toxic to the fungus. While the rates of mineralization were low, all of the polymers incubated in the liquid fungal cultures were completely depolymerized to water soluble products within 15–18 days. The depolymerization of the polymers was observed only in nitrogen limited cultures of the fungus which secrete the lignin degradation system, however, the water soluble products of depolymerization were mineralized in both nutrient limited and sufficient cultures of the fungus. The rate of mineralization of the depolymerized metabolites was more than two times greater in nutrient sufficient cultures. Following longer incubation periods, most (> 80 %) of the radioactivity was recovered in the fungal mycelial mat suggesting that carbon of the polymer had been converted to fungal metabolites.     

Rapid growth of clones of the red alga Chondrus crispus: applications in assays of toxic substances and in physiological studies

Growth rates of excised apical segments from three Chondrus crispus Stackhouse clones were rapid, reproducible and easily measured using simple equipment. Clonal segments exhibited a high degree of phenotypic stability, with coefficients of variation in growth rates being typically less than 5%. Sensitivity of the assay was demonstrated using 24-h pulses of the toxicants Cu²⁺ (10 to 150 ppb) and the molluscicide Bayluscide (100 to 500 ppb). As a further demonstration of applicability of this assay system, growth rates were measured over two consecutive 24-h photoperiods using a normally pigmented red gametophytic clone and a green colored mutant derived from it. Growth rates were highest in the first hours of the light phase for both clones, with growth of the green mutant being consistently inferior to that of the normally pigmented one. Significant changes were measured with intervals as short as 4 h using only five apical segments for each treatment. The C. crispus assay described is sensitive, relatively rapid, and statistically robust when applied to toxicant testing in seawater and to physiological studies.     

Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

Importance of eating habits and sample size in the estimation of environmental mercury contamination using biological indicators

The importance of eating habits and the number of fish sampled in the estimation of mercury environmental contamination through biological indicators was studied. The species used were one with piscivorous habits (Anguilla anguilla) and another with omnivorous habits (Ciprinus carpio). From one original sample for each species, randomized samples were generated using the subroutine GGSRS from the mathematics library IMSL, and later the statistical significance of Pearson's correlation coefficient for the relationship between fish weight and mercury concentrations in muscle was obtained for each random sample. The results show that the use of omnivorous species such as Ciprinus carpio as a biological indicator of contamination enables us to carry out estimations with a greater degree of confidence than when piscivorous species such as Anguilla anguilla are used.     

Mikrobielle Sanierung von 2,4,6-Trinitrotoluol (TNT) kontaminierten Böden

Within the limits of a feasability study abouton-site bioremediation methods for TNT-contaminated soils, composting was chosen as a very promising and cheap method. This method was critically compared with those described in the literature and was primarily rated under ecotoxicological aspects. The investigated location is the former munition plant «Tanne» in the aerea of Clausthal-Zellerfeld in Lower Saxony, Germany. To estimate the autochtonic microflora, we assessed the number of aerobic heterotrophic bacteria and determined their respiration activity in soils. In addition, we isolated bacteria and examined their capacity to metabolize TNTin vitro. Both the amount of autochtonic microrganisms (4.7×10⁸ to 1.2×10¹⁰ colony forming units (cfu)/kg dryweight) as well as their respiration activity did not correlate with the concentrations of nitrotoluenes in the soils. With high contaminated soil (20 g TNT/kg dry weight) we carried out a small compost in the range of 10 liters. During 28 days of composting TNT-concentration decrease over 90% and only minor amounts of monoaminodinitrotoluenes were generated. However, an acidic pretreatment of the compost material at the end of the reaction showed that TNT could be partially resolved under these extreme conditions and that an ecotoxicological risk may still exist. Possible changes in the realization of the composting process in order to make sure that the contaminants are savely bound to the humin matrix are discussed.