Inventory of emissions from major air pollutant categories in Turkey

In this study, an inventory of air pollutant emission estimates from major air polluting sources in Turkey for period between 1985 and 2005 with 5-year intervals were estimated. Inventory covers anthropogenic sources of five major air pollutants of particulate matter, sulfur dioxide, carbon monoxide, nitrogen oxides and non-methane volatile organic compounds. Their break-down with respect to main activity sectors were shown and their distribution by the largest industrial source categories were worked out as annual estimates. This inventory and its analysis point to serious environmental implications of air pollutants and a need to develop a policy plan for reducing these emissions.     

Foreword

Mitigation and Adaptation Strategies for Global Change -     

Utilisation of bubble resonance phenomena to improve gas–liquid contact

 In several branches of science and technology a gaseous phase is dispersed into a liquid in the form of bubbles, a gaseous component then dissolves into the liquid and subsequently undergoes chemical reaction. The overall process performance can be improved substantially when the area of gas–liquid contact is increased. By subjecting the liquid phase to low frequency vibrations, the bubbles are shown to suffer significant breakage, induced by resonance. When the vibration is properly tuned, the interfacial area is found to increase by a factor of 1.8–2.4, depending on the properties of the liquid. Resonance-induced bubble breakage phenomena have a great potential for improving the rates of chemical processes involving fast reactions, with minimal energy input. Received: 7 July 2000 / Accepted in revised form: 28 August 2000     

Groundwater pollution due to discharge of tannery effluents in Upper Palar basin, Tamilnadu, India: an assessment through mass transport modeling

The groundwater regime in Upper Palar basin, Tamilnadu has been highly contaminated in several locations due to discharge of effluents from a large number of tanneries. At some places total dissolved solids (TDS) concentration in groundwater was found as high as 8000 mg/l. Transmissivity and storativity of the regional aquifer were estimated at a few locations. The porosity and dispersivity values were not determined in the field. These parameters were assumed based on data available for similar geological formations elsewhere. The aquifer conceptualization thus arrived at formed the basis of a numerical groundwater flow model which was constructed using the finite difference method. The flow model was calibrated for steady state and then for transient condition for the period of 1984-92. The computed heads and calibrated parameters of the flow model were used to compute groundwater velocities. The migration of contaminants for a 20 year period was computed using the hydraulic heads and effective porosity value in a pathline model using FLOWPATH software. Mass transport model was constructed using Method of Characteristics (MOC) computer code in a separate model. The seepage rate of effluent is assumed at a rate of 30% of that discharged on the surface. The mass concentration of solute in the effluent reaching the water table was assumed as 40%, the same as in the surface effluent. The mass transport model was calibrated for a 20 year period. Prediction of contaminant migration from different clusters in the basin was analyzed. The prediction results indicated elevated TDS concentration of more than 4000 mg/l from most clusters. Also the area of the contaminated zone is likely to double in 20 years from contaminated zone of 1992.     

Results of a questionnaire investigation on the management of environmental issues during conceptual design. A case study of two large made-to-order companies

This paper investigates the current treatment of environmental issues by two companies within the large made-to-order sector. Fifty questionnaires were issued to the design team of each company to assess current practice in the integration of environmental issues with design activities, awareness of environmental issues, awareness of existing environmental design tools and the preferred format for a potential clean design tool.     

Latest precambrian (Cadomian) zircon ages, Nd isotopic systematics and P-T evolution of granitoid orthogneisses of the Erzgebirge, Saxony and Czech Republic

Single zircons from two orthogneiss complexes, the Grey Gneiss and Red Gneiss, the lowermost tectonic units in the Erzgebirge, were dated. The grey Freiberg Gneiss is of igneous origin and has a ²⁰⁷Pb/²⁰⁶Pb emplacement age of 550±7 Ma. A quartz monzonite from Lauenstein contains idiomorphic zircons with a mean ²⁰⁷Pb/²⁰⁶Pb age of 555±7 Ma as well as xenocrysts ranging in age between 850 and 1910 Ma. Red gneisses from the central Erzgebirge contain complex zircon populations, including numerous xenocrysts up to 2464 Ma in age. The youngest, idiomorphic, zircons in all samples yielded uniform ²⁰⁷Pb/²⁰⁶Pb ages between 550±9 and 554±10 Ma. Nd isotopic data support the interpretation of crustal anatexis for the origin of both units. _Nd(t) values for the grey gneisses are –7.5 and –6.0 respectively, (mean crustal residence ages of 1.7–1.8 Ga). The red gneisses have a wider range in _Nd(t) values from –7.7 to –2.8 (T _DM ages of 1.4–1.8 Ga). The zircon ages document a distinct late Proterozoic phase of granitoid magmatism, similar in age to granitoids in the Lusatian block farther north-east. However, Palaeozoic deformation as well as medium pressure metamorphism ( 8 kbar/600–650° C) are identical in both gneiss units and distinguish these rocks from the Lusatian granitoids. The grey and red gneisses were overthrust by units with abundant high-pressure relicts and a contrasting P-T evolution. Zircon xenocryst and Nd model ages in the range 1000–1700 Ma are similar to those in granitoid rocks of Lusatia and the West-Sudetes, and document a pre-Cadomian basement in parts of east-central Europe that, chronologically, has similarities with the Sveconorwegian domain in the Baltic Shield.