Electrochemical decolourisation of structurally different dyes

The electrochemical decolourisation of structurally different dyes (bromophenol blue, indigo, poly R-478, phenol red, methyl orange, fuchsin, methyl green and crystal violet) by means of the application of DC electric current was assessed. It was found that the electrochemical process allowed a colour removal of all dyes studied, although the decolourisation rate largely depended on the chemical structure of the different dyes. Nearly complete decolourisation was achieved for bromophenol blue followed by methyl orange and methyl green, whereas phenol red was hardly decolourised (30% in 60 min). In mixtures of two dyes, the decolourisation rate became similar for both dyes. However, the addition of a redox mediator, (Co(2+/3+)) clearly enhanced the degradation rate of all tested dyes, but the simplest dye molecules were attacked firstly, followed by dyes with more complex chemical structures. The results revealed the suitability of the process to effectively decolourise wastewaters from dyeing process.     

Biosensors for detection of mercury in contaminated soils

Biosensors based on whole bacterial cells and on bacterial heavy metal binding protein were used to determine the mercury concentration in soil. The soil samples were collected in a vegetable garden accidentally contaminated with elemental mercury 25 years earlier. Bioavailable mercury was measured using different sensors: a protein-based biosensor, a whole bacterial cell based biosensor, and a plant sensor, i.e. morphological and biochemical responses in primary leaves and roots of bean seedlings grown in the mercury-contaminated soil. For comparison the total mercury concentration of the soil samples was determined by AAS. Whole bacterial cell and protein-based biosensors gave accurate responses proportional to the total amount of mercury in the soil samples. On the contrary, plant sensors were found to be less useful indicators of soil mercury contamination, as determined by plant biomass, mercury content of primary leaves and enzyme activities.     

Characterisation of the dilute HCl extraction method for the identification of metal contamination in Antarctic marine sediments

A regional survey of potential contaminants in marine or estuarine sediments is often one of the first steps in a post-disturbance environmental impact assessment. Of the many different chemical extraction or digestion procedures that have been proposed to quantify metal contamination, partial acid extractions are probably the best overall compromise between selectivity, sensitivity, precision, cost and expediency. The extent to which measured metal concentrations relate to the anthropogenic fraction that is bioavailable is contentious, but is one of the desired outcomes of an assessment or prediction of biological impact. As part of a regional survey of metal contamination associated with Australia's past waste management activities in Antarctica, we wanted to identify an acid type and extraction protocol that would allow a reasonable definition of the anthropogenic bioavailable fraction for a large number of samples. From a kinetic study of the 1 M HCl extraction of two Certified Reference Materials (MESS-2 and PACS-2) and two Antarctic marine sediments, we concluded that a 4 h extraction time allows the equilibrium dissolution of relatively labile metal contaminants, but does not favour the extraction of natural geogenic metals. In a regional survey of 88 marine samples from the Casey Station area of East Antarctica, the 4 h extraction procedure correlated best with biological data, and most clearly identified those sediments thought to be contaminated by runoff from abandoned waste disposal sites. Most importantly the 4 h extraction provided better definition of the low to moderately contaminated locations by picking up small differences in anthropogenic metal concentrations. For the purposes of inter-regional comparison, we recommend a 4 h 1 M HCl acid extraction as a standard method for assessing metal contamination in Antarctica.     

Removal of nickel (II) from aqueous solutions using marine macroalgae as the sorbing biomass

In the present study biosorption technique, the passive accumulation of metals by biomass, is used for the removal of nickel from aqueous medium. The brown algae, Sargassum sp., in its natural and acid treated forms are used as a low cost sorbent. The adsorption characteristics of nickel on Sargassum sp. are evaluated as a function of time, pH, adsorbent dosage and initial concentration of nickel. The equilibrium adsorption data are fitted to Freundlich and Langmuir adsorption isotherm models and the model parameters are evaluated. Both the models represent the experimental data satisfactorily. The adsorption follows Lagergren first order kinetic model. The monolayer adsorption capacities of natural and acid treated forms of algae as obtained from Langmuir adsorption model are found to be 181 and 250mg g(-1) respectively.     

Analysis of extinction in ultraviolet and visible spectra of water bodies of the Paraguay and Brazil wetlands

The extinction spectra in ultraviolet and visible radiation were analyzed using filtered and unfiltered water samples obtained in 11 open water bodies in the Neembucù (Paraguay) and Pantanal (Brazil) wetlands. The role of dissolved and suspended matter in the total extinction was analyzed between 260 nm and 700 nm. The chromophoric dissolved organic matter (CDOM) was the major component in extinction of considered ultraviolet radiation (260-400 nm). The differences in CDOM concentrations explained the main pattern of extinction of the ultraviolet radiation in the samples. Nevertheless, differences between the studied water bodies were found also to depend on the rate of photodegradation and photobleaching. The methodology developed in the present study was to distinguish "humic optic waters" according to quantity and quality of dissolved and suspended matter present. In the "humic optic water", the penetration of 10% of incident UV radiation and the photoactive layer are estimated. The influence of particulate matter increases in the total extinction of the wavelengths higher than 400 nm. The integral of the extinction curve of suspended matter in the visible wavelengths (400-700 nm) was found to relate with the total suspended solids and chlorophyll concentrations.     

Comparison of microwave assisted extraction with conventional (homogenization, vortexing) for the determination of incurred salinomycin in chicken eggs and tissues

Incurred and fortified salinomycin residues were extracted from chicken tissues and eggs by homogenization, vortexing and by microwave assisted extraction. The salinomycin residues were quantitated by liquid chromatography following postcolumn derivatization with either vanillin or 4-dimcthylamino-benzaldehyde and detected at 520 or 592 nm, respectively. Comparison of residue data indicated that microwave assisted extraction performed as well as the vortexing technique in extracting salinomycin residues in the tissues of laying chickens that were fed meal containing drugs at various level. In the present study, extracts from homogenizing could not be analyzed directly without clean up. Therefore, microwave assisted extraction appears to be a reliable, reproducible, and economical substitute for routinely used homogenization and vortexing extraction techniques.     

Effects of the mosquito larvicide GB-1111 on bird eggs

Golden Bear Oil (GB-1111; legal trade name for GB-1313) is a petroleum distillate used in the United States and other countries as a mosquito larvicide. As part of an evaluation of the potential effects of GB-1111 on birds, fertile eggs of mallards (Anas platyrhynchos) and bobwhite (Colinus virginianus) were incubated in the laboratory, and treated on day 4 of incubation with external applications equivalent to either 0, 1/3, 1, 3 or 10 times the maximum rate (X) of 47 l/ha (5 gal/A) of field application of GB-1111. Hatching success was significantly reduced in mallards treated at 3 and 10 times the maximum field application, with a calculated approximate LD50 of 1.9 times the maximum field application. Most mortality occurred within a week of treatment. Hepatic P450-associated monooxygenase activity (ethoxyresorufin-O-dealkylase; EROD) was negatively related to dose. In the 3X group there was a significant increase in the concentration of hepatic reduced glutathione (GSH) but a decrease in protein-bound thiols (PBSH). Hatching success of bobwhite was marginally reduced at the highest level of treatment (10X). Other effects at this level in bobwhite included a significant increase in incidence of abnormal embryos or hatchlings, lower body and liver weights, and a two-fold increase in hepatic microsomal EROD activity in hatchlings. The recommended maximum rate of field application of GB-1111 is unlikely to impair the survival or development of bobwhite embryos but is potentially toxic to mallard embryos under conditions of larvicide drift or spray overlap.     

Influence of plants on the methane emission from sediments

The previous theory [Chem. Global Change Sci. 3 (2001) 33; Chemosphere 50 (2003) 191] of methane emission is applied to vegetated sediments. The presence of roots in a sediment is taken into account. It is assumed that methane and nitrogen enter a sediment through channels existing in plants and roots. The rate of methane and nitrogen transport through plants and roots is proportional to the difference in concentrations in the layer and on the upper surface. It is established that as the vegetation density increases, the rate of methane transport increases so that with sufficient vegetation density, almost all methane passes to the atmosphere through plants. In this case, the value of bubble emission decreases to zero. The nitrogen transport rate through plants first increases and then decreases with increasing the vegetation density. The theory qualitatively and quantitatively describes the dependence of methane concentration on depth in the presence of plants. A comparison with the available experimental data on dissolved methane concentration and bubble composition indicates satisfactory agreement.     

BETR-World: a geographically explicit model of chemical fate: application to transport of alpha-HCH to the Arctic

The Berkeley-Trent (BETR)-World model, a 25 compartment, geographically explicit fugacity-based model is described and applied to evaluate the transport of chemicals from temperate source regions to receptor regions (such as the Arctic). The model was parameterized using GIS and an array of digital data on weather, oceans, freshwater, vegetation and geo-political boundaries. This version of the BETR model framework includes modification of atmospheric degradation rates by seasonally variable hydroxyl radical concentrations and temperature. Degradation rates in all other compartments vary with seasonally changing temperature. Deposition to the deep ocean has been included as a loss mechanism. A case study was undertaken for alpha-HCH. Dynamic emission scenarios were estimated for each of the 25 regions. Predicted environmental concentrations showed good agreement with measured values for the northern regions in air, and fresh and oceanic water and with the results from a previous model of global chemical fate. Potential for long-range transport and deposition to the Arctic region was assessed using a Transfer Efficiency combined with estimated emissions. European regions and the Orient including China have a high potential to contribute alpha-HCH contamination in the Arctic due to high rates of emission in these regions despite low Transfer Efficiencies. Sensitivity analyses reveal that the performance and reliability of the model is strongly influenced by parameters controlling degradation rates.     

Polychlorinated biphenyls and chlorinated pesticides in mussels from the Egyptian Red Sea coast

The residues of 17 organochlorine pollutants were analyzed in bivalve Brachiodontes sp. collected from 11 different locations in April 2000 along the Egyptian Red Sea coast. The pollutants studied were 10 individual polychlorinated biphenyl (PCB) congeners, alpha,alpha,alpha-hexachlorocyclohexane (HCHs), cyclodienes (heptachlor, heptachlorepoxide, aldrin, dieldrin) and dichlorodiphenyltrichloroethanes (DDTs) (p,p'-DDE, p,p'-DDD and p,p'-DDT). The concentration of total DDTs ranged between 125 and 772 ng/g of wet weight whereas the concentration of the PCBs, HCHs and cyclodienes ranged from 6.7 to 66.4 ng/g; 16.2 to 183.4 ng/g and 8.8 to 221.6 ng/g of wet weight, respectively. The levels are low to moderate in relation to the published data from other coastal areas. The present results indicate low to moderate PCBs and pesticides contamination in the investigated mussels except DDTs.