微量进样注射-火焰原子吸收光谱法测定硅酸盐岩石和四个新的加拿大铁建造参考物料中的钪、钇和镧系元素

<正> 关于稀土元素丰度的研究对岩石成因模式讨论要求建立快速测定各种不同的火成岩、沉积岩和造岩矿物中稀土元素的分析方法。早先报道了一种测定某些矿物岩石中的 Y、Nd、Eu、Dy、Ho、Er、Tm 和 Yb 的原子吸收光谱法,它是将样品溶液(含1%La 作光谱缓冲剂的高氯酸盐乙醇介质)直接抽吸进入氧化亚氮-乙炔焰。而稀土元素(REE)是先通过草酸钙共     

24、用电化学和紫外检测的高压液相色谱法测定卤代苯胺及有关化合物

卤代苯胺可以从各种渠道包括农药、除莠剂、杀菌剂的代谢作用,工业废料和硝基取代芳香化合物的还原而进入环境中。由于苯胺类化合物有毒所以要求在环境中监测。以前用气相色谱法,需要进行衍生化;而且某些被卤代的代谢物还不能被分离。本文研究的高压液相色谱法可在无衍生化步骤的情况下进行分离,并检测出亚毫微克量的物质。这些化合物是用商品c-18键合相柱分离的,并用价廉的电化学检定器检测至亚毫微克量级。同时还研究了快速但灵敏度很低的紫外线方法。列举了各种化合物的色谱图和灵敏度数据。讨论了电化学检定的应用和限度。     

Water solubility enhancements of pyrene by single and mixed surfactant solutions

ＩｎｔｒｏｄｕｃｔｉｏｎＳｕｒｆａｃｔａｎｔｓｅｎｈａｎｃｅｔｈｅｒｅｍｅｄｉａｔｉｏｎｏｆＮＡＰＬ ｃｏｎｔａｍｉｎａｔｅｄｓｉｔｅｓｂｙｉｎｃｒｅａｓｉｎｇｔｈｅａｑｕｅｏｕｓ ｐｈａｓｅｃｏｎｃｅｎｔｒａｔｉｏｎｏｆｔｈｅＮＡＰＬｖｉａｍｉｃｅｌｌｅｆｏｒｍａｔｉｏｎ ,ｍｉｃｒｏｅｍｕｌｓｉｆｉｃａｔｉｏｎ ,ｏｒｍｏｂｉｌｉｚｉｎｇｔｈｅＮＡＰＬｐｈａｓｅ (Ｋｉｌｅ ,1989;Ｅｄｗａｒｄｓ,1991;Ｇｕｈａ ,1998ａ ;Ｋｏ ,1998;Ｚｉｍｍｅｒｍａｎ ,1999;Ｂｅｔｔａｈａｒ,1999;Ｗｉｌｌｓｏｎ ,1999;Ｐａ…     

Removal of copper from a copper sulphate solution using an ultrasonic-electrolysis process

The application of ultrasonic-electrolysis process for the removal of copper is studied.In the ultrasonic field cavitation acts as jets and agitates the solution and breaks the barrier layer between the cathode surface and the bulk of the solution.Thus increases metal deposition on the cathode surface.The results show that an ultrasonic field is successful for the removal of low copper concentrations in solution.     

Determination and discussion hydraulic retention time in membrane bioreactor system

Based on the microorganism kinetic model, the formula for computing hydraulic retention time in a membrane bioreactor system (MBR) is derived. With considering HRT as an evaluation index a combinational approach was used to discuss factors which have an effect on MBR. As a result, the influencing factors were listed in order from strength to weakness as: maximum specific removal rate K, saturation constant Ks, maintenance coefficient m, maximum specific growth rate ,ua and observed yield coefficient Yobs. Moreover, the formula was simplified, whose parameters were experimentally determined in petrochemical wastewater treatment. The simplified formula is θ= 1.1( 1/β -1)(Kｓ S)/KXo , for oetroehemical wastewater treatment K and Ko eaualed 0.185 and 154.2, resoectively.     

内布拉斯加州第四记冰碛年龄

<正> 北美第四纪沉积物曾有过一段漫长而有趣的历史。内布拉斯加州的第四纪沉积物是很重要的,因为许多经济活动都依赖于这些堆积物上发育的土壤和从沉积物中汲出的水,建筑材料也采自这些沉积物。从某种意义上说,几乎所有从事陆地上工作的人都是第四纪研究者,农民注意各种土类的差异和散布于内布拉斯加东部冰川作用区周围的奇特“外来石”景观,打井工人都熟悉这些沉积地层和埋藏在古河道中呈“脉状”     

Biodegradation of aliphatic and aromatic hydrocarbons by natural soil microflora and pure cultures of imperfect and lignolitic fungi

The biodegradation of aliphatic and aromatic hydrocarbons by natural soil microflora and seven fungi species, including imperfect strains and higher level lignolitic species, is compared in a 90-day laboratory experiment using a natural, not-fertilized soil contaminated with 10% crude oil. The natural microbial soil assemblage isolated from an urban forest area was unable to significantly degrade crude oil, whereas pure fungi cultures effectively reduced the residues by 26-35% in 90 days. Normal alkanes were almost completely degraded in the first 15 days, whereas aromatic compounds (phenanthrene and methylphenanthrenes) exhibited slower kinetics. Aspergillus terreus and Fusarium solani, isolated from oil-polluted areas, produced the more efficient attack of aliphatic and aromatic hydrocarbons, respectively. Overall, imperfect fungi isolated from polluted soils showed a somewhat higher efficiency, but the performance of unadapted, indigenous, lignolitic fungi was comparable, and all three species, Pleurotus ostreatus, Trametes villosus and Coriolopsis rigida, effectively degraded aliphatic and aromatic components. The simultaneous, multivariate analysis of 22 parameters allowed the elucidation of a clear reactivity trend of the oil components during biodegradation: lower molecular weight n-alkanes > phenanthrene > 3-2-methylphenanthrenes > intermediate chain length n-alkanes > longer chain length n-alkanes > isoprenoids approximately 9-1-methylphenanthrenes. Irrespective of the individual degrading capacities, all fungi species tested seem to follow this decomposition sequence.     

Scots pine needle surfaces on radial transects across the north boreal area of Finnish Lapland and the Kola Peninsula of Russia

To gain an understanding of the characteristics of the needle surfaces of naturally regenerated Scots pine (Pinus sylvestris L.) and their geographical distribution, eight physicochemical variables were investigated within the north boreal forest area. The visibly undamaged needles were collected in autumn 1990 from 114 plots (3-5 pines per plot) along radial transects from the Monchegorsk and Nikel smelters, emitting SO2 and heavy metals, on the Kola Peninsula, Russia, to Finnish Lapland. The needles were examined by scanning electron microscopy (SEM) and measured for surface wettability using the droplet contact angle (DCA) method. Significant geographical south-north and west-east patterns could be observed in needle surface characteristics, correlating with emissions from the smelters and to climate. Despite the slightly higher initial DCAs (61.4-87.6 degrees) towards the north, the pine needle surfaces of the northernmost transects exhibited higher annual needle wettability change (ANWC) and wax erosion rate (AWER), expressed as the reduction in DCAs and epistomatal wax tube distribution (WTD) during one year, respectively, but a lower occurrence of particles and fungal hyphae than those of more southern transects. The higher ANWC was related to higher atmospheric SO2 concentration, and to the lower long-term temperature sum, but not clearly to annual precipitation. In the Monchegorsk smelter area, the current needles exhibited, on average, a 15% higher WTD and seven degree larger DCA, resulting in more hydrophobic needle surfaces than in Finnish Lapland, but during their first year, both the AWER and ANWC, were greatly increased. In Finnish Lapland, 30%, of all the epistomatal wax tubes disappeared from the needle surface during the first year, the value being 70% for the pines located 8 km from the smelter. The mineral composition of the particles deposited on the needle surfaces mirrored that of the minerals being produced by the smelters (e.g. FexSx, CuFeS2, NixSx, FexOx). Stomatal densities were in the range of 71.1-141.7 stomata mm(-2). The lower densities of stomata on needles close to the smelters correlated with reduced number of needle age classes of the pines, higher dry weights, higher pollutant accumulation and lower Mn and Zn concentrations in the needles. The AWER and ANWC were able to indicate the most seriously deteriorated needle surfaces on a regional scale, e.g. including the surroundings of both smelters, although the plot-specific relationships between 'needle surface variables' and 'pollution variables' were generally weak. The present study showed that the exposure of pine needles to the combined effects of ambient pollutants and harsh climate led to a deterioration in the physicochemical characteristics of the epicuticular wax, which may have serious ecophysiological consequences in the long term.     

The effect of papermill wastewater and organic amendments of sodium accumulation by potted cottonwoods

In this experiment, the impacts of pulp mill effluent irrigation, Fraser cottonwood (Populus deltoides 'Fraser') seedlings, and pulp sludge and manure soil amendments on sodium accumulation and distribution in the soil profile were evaluated during a 6 month greenhouse study. Sludge soil amendments and wastewater irrigation did not reduce stem biomass production of the cottonwood. Increased stem biomass production associated with manure soil amendments resulted in greater total uptake of sodium into stem material. This uptake was 0.002% of wastewater sodium inputs. In containers with seedlings, sodium concentrations were less in the surface horizon and more in the lower horizons than in containers with no seedlings. Infiltration rates and total sodium accumulation in the soil profile were not affected by the presence of Fraser cottonwood or the application of sludge or manure amendments to soil.     

Cationic surfactant as a sensitizer for the spectrophotometric determination of hydrogen sulphide in air and evaluation of a new absorbing medium containing triethanolamine-zinc acetate-sodium hydroxide

An extractive spectrophotometric method for the determination of trace amounts of hydrogen sulphide after fixing the gas in triethanolamine (TEA)-zinc acetate-sodium hydroxide solution is described. The method is based on the reaction of iodate with hydrogen sulphide in the presence of acid and excess chloride ion leading to the formation of ICl2- species which is used to iodinate 2',7'-dichlorofluorescein to form 2',7'-dichloro-4',5'-diiodofluorescein. The iodinated product formed is extracted into an organic solvent and sensitized by equilibrating with a cationic surfactant, cetrimide, in the presence of acetate buffer (pH 5.9 +/- 0.1). The colour system obeys Beer's law over the range 0-1 microg of hydrogen sulphide and the relative standard deviation is 2.4% for 10 determinations at 0.75 microg of hydrogen sulphide. The effect of interfering gases on the determination is discussed. The proposed absorbing solution has been evaluated using a hydrogen sulphide permeation device. This absorbing solution has an absorption efficiency of > 93% at a flow rate of 1.5 litre min(-1) for a sampling period of 2 h. The fixed H2S is stable for 40 days. The method has been applied to determine residual H2S levels in a laboratory fume hood and in the vicinity of sewage pumping station. The method can be used to determine as little as 0.05 microg of hydrogen sulphide.