Controlled-release fertilizer(CRF):A green fertilizer for controlling non-point contamination in agriculture

Fertilizers contribute greatly to high yields but also result in environmental non-point contamination, including the emission of greenhouse gas(N2O) and eutrophication of water bodies. How to solve this problem has become a serious challenge, especially for China as its high ecological pressure. Controlled-release fertilizer(CRF) has been developed to minimize the contamination while keeping high yield and has become a green fertilizer for agriculture. Several CRFs made with special coating technology were used for testing the fertilizer effects in yield and environment through pot experiment and field trial. The result indicated that the CRFs had higher N use efficiency, thus reducing N loss through leaching and volatilization while keeping higher yields. Comparing with imported standard CRFs,the test on CRFs showed similar fertilizer effect but with much lower cost. CRFs application is becoming a new approach for minimizing non-point contamination in agriculture.     

含酚废水治理方法的研究

根据含酚废水的性质，用ClO2氧化除酚，ZL—1和聚丙烯酰胺(PAM)混凝沉降除悬浮物的方法处理该废水。实验结果表明，经处理后废水中的主要污染物酚、焦油和悬浮物等去除率都很高，该水可以满足循环使用的要求。     

有效微生物技术在渗滤液处理中的应用与发展

介绍了有效微生物(EM)的组成、特点及其处理废水的机理;通过与传统的生化法处理垃圾渗滤液的比较,指出了利用EM技术处理垃圾渗滤液的优势,认为该技术不仅能够提高污染物的去除效率,降低污泥产量,而且能够缩短反应器的响应时间;并介绍了EM制剂在国内外的生产情况,对今后EM技术的发展前景提出了展望.     

A regional environmental management information system for Chinese EPA—the system analysis and design

REMIS is one of key research projects sponsored by the central government. It is recommended to regional EPAs as a main tool of the environmental management. REMIS simulates the functions of the regional EPAs and aimed to improve their management level. The national environmental management information system will base on REMIS.Functional analysis is the kernel of the REMIS system analysis. Data and data flow analysis are used to support the functional analysis.Investigations on the functions of the local EPAs of eight provinces and 12 cities have been taken. The functions were carefully sorted. Modular design method was used in system analysis and system design.The system analysis included functional analysis, data analysis and data flow analysis. The system design is based on the system analysis. HIPO diagram of each modular, data base structure, menu design, selection of hardware and software environment were the main items of the system design.     

聚合物材料在快速原型制造技术中的应用

介绍聚合物材料作为成形原料在主要的快速原型制造(RPM)工艺中的应用情况。具体按照立体印刷成形(SLA)、层合实体制造(LOM)、选域激光烧结(SLS)及熔融沉积造型(FDM)这4种工艺的不同,阐述与各工艺对应的聚合物材料的种类、聚合物材料成形过程中可能出现的问题及解决方案。总结了聚合物材料原型的应用情况和聚合物材料在RPM技术应用中存在的问题。     

环境影响评价有效性评估理论研究

结合系统工程理论，初步建立环境影响评价有效性评估的概念方法和理论体系，据此对我国环境影响评价有效性进行初步评估，并提出进一步提高我国环境影响评价有效性的对策及建议。     

西宁盐碱地区高速公路植被恢复技术探讨

西宁至马场垣高速公路穿越的地区属于生态脆弱带。与其他生态脆弱区不同的是，其土壤中盐分的含量非常高，土壤碱性强，它不仅导致植物的生理干旱，还对植物细胞产生毒害作用，不良的植被恢复措施也加重其危害程度。为减轻盐碱的危害需要采取相应的措施如筛选适宜植物、农业灌溉、化学及其它措施，可以减轻危害恢复植被。     

水解-好氧系统处理生活污水的特性研究

采用新型 Yakult填料和中心导流式曝气方式 ,设计制作了新型生活污水净化装置 ,试验表明 ,停留时间 16 h左右 ,CODCr去除率 >80 % ,BOD5去除率 >90 % ,SS去除率 >85 % ,NH3 - N去除率 >87% ,出水水质达到国家一级排放标准     

上海市大气气溶胶中铂元素污染状况调查

为调查上海市大气气溶胶中铂元素的污染状况,用PM10-2型可吸入颗粒物采样器采集了上海市大气气溶胶样品,采样时间分别为2003-12～2005-12.用微波消解密闭系统消解样品,电感耦合等离子体质谱法(ICP-MS)测定了大气气溶胶中Pt的含量.分析结果表明,同清洁对照点((0.65±0.16)pg·m-3)相比,上海市中心区大气中Pt((1.69±0.93)pg·m-3)的污染是明显的;装有三元催化转化器的汽车尾气中Pt的含量均在100ng·g-1以上,远远高于大气气溶胶样品(人民广场平均值21.7ng·g-1);不同交通密度区Pt含量分析结果表明,Pt含量与交通密度紧密相关,这说明装有三元催化器的汽车尾气是气溶胶中Pt污染的主要来源;此外,上海市大气气溶胶中Pt呈现季节性变化,并受气象条件影响.同世界其它城市相比,上海市气溶胶中铂元素污染程度还较低,但是这种潜在的重金属污染应该引起重视.     

城市污水厂污泥热干燥处理技术及其应用分析

提出采用热干燥处理技术进一步降低脱水泥饼的含水率，介绍了现行的污泥热干燥处理技术，并就该技术在污泥处理中的应用尤其是在焚烧预处理中的应用进行了分析。